-
Frontiers in Oral Health 2023The dental pellicle is a thin layer of up to several hundred nm in thickness, covering the tooth surface. It is known to protect the teeth from acid attacks through its... (Review)
Review
BACKGROUND
The dental pellicle is a thin layer of up to several hundred nm in thickness, covering the tooth surface. It is known to protect the teeth from acid attacks through its selective permeability and it is involved in the remineralization process of the teeth. It functions also as binding site and source of nutrients for bacteria and conditioning biofilm (foundation) for dental plaque formation.
METHODS
For this updated literature review, the PubMed database was searched for the dental pellicle and its composition.
RESULTS
The dental pellicle has been analyzed in the past years with various state-of-the art analytic techniques such as high-resolution microscopic techniques (e.g., scanning electron microscopy, atomic force microscopy), spectrophotometry, mass spectrometry, affinity chromatography, enzyme-linked immunosorbent assays (ELISA), and blotting-techniques (e.g., western blot). It consists of several different amino acids, proteins, and proteolytic protein fragments. Some studies also investigated other compounds of the pellicle, mainly fatty acids, and carbohydrates.
CONCLUSIONS
The dental pellicle is composed mainly of different proteins, but also fatty acids, and carbohydrates. Analysis with state-of-the-art analytical techniques have uncovered mainly acidic proline-rich proteins, amylase, cystatin, immunoglobulins, lysozyme, and mucins as main proteins of the dental pellicle. The pellicle has protective properties for the teeth. Further research is necessary to gain more knowledge about the role of the pellicle in the tooth remineralization process.
PubMed: 37899941
DOI: 10.3389/froh.2023.1260442 -
Scientific Reports Nov 2023Dental hard tissues from different species are used in dental research, but little is known about their comparability. The aim of this study was to compare the erosive...
Dental hard tissues from different species are used in dental research, but little is known about their comparability. The aim of this study was to compare the erosive behaviour of dental hard tissues (enamel, dentin) obtained from human, bovine and equine teeth. In addition, the protective effect of the pellicle on each hard tissue under erosive conditions was determined. In situ pellicle formation was performed for 30 min on enamel and dentin samples from all species in four subjects. Calcium and phosphate release was assessed during 120 s of HCl incubation on both native and pellicle-covered enamel and dentin samples. SEM and TEM were used to examine surface changes in native enamel and dentin samples after acid incubation and the ultrastructure of the pellicle before and after erosive exposure. In general, bovine enamel and dentin showed the highest degree of erosion after acid exposure compared to human and equine samples. Erosion of human primary enamel tended to be higher than that of permanent teeth, whereas dentin showed the opposite behaviour. SEM showed that eroded equine dentin appeared more irregular than human or bovine dentin. TEM studies showed that primary enamel appeared to be most susceptible to erosion.
Topics: Humans; Animals; Cattle; Horses; Tooth Erosion; Dentin; Calcium; Hydrochloric Acid; Phosphates
PubMed: 37949920
DOI: 10.1038/s41598-023-46759-9 -
Molecules (Basel, Switzerland) Sep 2023(1) Background: In the oral environment, sound enamel and dental restorative materials are immediately covered by a pellicle layer, which enables bacteria to attach. For...
(1) Background: In the oral environment, sound enamel and dental restorative materials are immediately covered by a pellicle layer, which enables bacteria to attach. For the development of new materials with repellent surface functions, information on the formation and maturation of salivary pellicles is crucial. Therefore, the present in situ study aimed to investigate the proteomic profile of salivary pellicles formed on different dental composites. (2) Methods: Light-cured composite and bovine enamel samples (controls) were exposed to the oral cavity for 30, 90, and 120 min. All samples were subjected to optical and mechanical profilometry, as well as SEM surface evaluation. Acquired pellicles and unstimulated whole saliva samples were analyzed by SELDI-TOF-MS. The significance was determined by the generalized estimation equation and the post-hoc bonferroni adjustment. (3) Results: SEM revealed the formation of homogeneous pellicles on all test and control surfaces. Profilometry showed that composite surfaces tend to be of higher roughness compared to enamel. SELDI-TOF-MS detected up to 102 different proteins in the saliva samples and up to 46 proteins in the pellicle. Significant differences among 14 pellicle proteins were found between the composite materials and the controls. (4) Conclusions: Pellicle formation was material- and time-dependent. Proteins differed among the composites and to the control.
Topics: Animals; Cattle; Saliva; Proteomics; Dental Pellicle; Proteins; Spectrometry, Mass, Matrix-Assisted Laser Desorption-Ionization
PubMed: 37836647
DOI: 10.3390/molecules28196804 -
Cells Oct 2023Soft tissue adhesion and sealing around dental and maxillofacial implants, related prosthetic components, and crowns are a clinical imperative to prevent adverse...
Soft tissue adhesion and sealing around dental and maxillofacial implants, related prosthetic components, and crowns are a clinical imperative to prevent adverse outcomes of periodontitis and periimplantitis. Zirconia is often used to fabricate implant components and crowns. Here, we hypothesized that UV treatment of zirconia would induce unique behaviors in fibroblasts that favor the establishment of a soft tissue seal. Human oral fibroblasts were cultured on zirconia specimens to confluency before placing a second zirconia specimen (either untreated or treated with one minute of 172 nm vacuum UV (VUV) light) next to the first specimen separated by a gap of 150 µm. After seven days of culture, fibroblasts only transmigrated onto VUV-treated zirconia, forming a 2.36 mm volume zone and 5.30 mm leading edge. Cells migrating on VUV-treated zirconia were enlarged, with robust formation of multidirectional cytoplastic projections, even on day seven. Fibroblasts were also cultured on horizontally placed and 45° and 60° tilted zirconia specimens, with the latter configurations compromising initial attachment and proliferation. However, VUV treatment of zirconia mitigated the negative impact of tilting, with higher tilt angles increasing the difference in cellular behavior between control and VUV-treated specimens. Fibroblast size, perimeter, and diameter on day seven were greater than on day one exclusively on VUV-treated zirconia. VUV treatment reduced surface elemental carbon and induced superhydrophilicity, confirming the removal of the hydrocarbon pellicle. Similar effects of VUV treatment were observed on glazed zirconia specimens with silica surfaces. One-minute VUV photofunctionalization of zirconia and silica therefore promotes human oral fibroblast attachment and proliferation, especially under challenging culture conditions, and induces specimen-to-specimen transmigration and sustainable photofunctionalization for at least seven days.
Topics: Humans; Surface Properties; Vacuum; Fibroblasts; Silicon Dioxide
PubMed: 37947620
DOI: 10.3390/cells12212542 -
International Journal of Molecular... Sep 2023Hydrophilicity/hydrophobicity-or wettability-is a key surface characterization metric for titanium used in dental and orthopedic implants. However, the effects of...
Hydrophilicity/hydrophobicity-or wettability-is a key surface characterization metric for titanium used in dental and orthopedic implants. However, the effects of hydrophilicity/hydrophobicity on biological capability remain uncertain, and the relationships between surface wettability and other surface parameters, such as topography and chemistry, are poorly understood. The objective of this study was to identify determinants of surface wettability of titanium and establish the reliability and validity of the assessment. Wettability was evaluated as the contact angle of ddHO. The age of titanium specimens significantly affected the contact angle, with acid-etched, microrough titanium surfaces becoming superhydrophilic immediately after surface processing, hydrophobic after 7 days, and hydrorepellent after 90 days. Similar age-related loss of hydrophilicity was also confirmed on sandblasted supra-micron rough surfaces so, regardless of surface topography, titanium surfaces eventually become hydrophobic or hydrorepellent with time. On age-standardized titanium, surface roughness increased the contact angle and hydrophobicity. UV treatment of titanium regenerated the superhydrophilicity regardless of age or surface roughness, with rougher surfaces becoming more superhydrophilic than machined surfaces after UV treatment. Conditioning titanium surfaces by autoclaving increased the hydrophobicity of already-hydrophobic surfaces, whereas conditioning with 70% alcohol and hydrating with water or saline attenuated pre-existing hydrophobicity. Conversely, when titanium surfaces were superhydrophilic like UV-treated ones, autoclaving and alcohol cleaning turned the surfaces hydrorepellent and hydrophobic, respectively. UV treatment recovered hydrophilicity without exception. In conclusion, surface roughness accentuates existing wettability and can either increase or decrease the contact angle. Titanium must be age-standardized when evaluating surface wettability. Surface conditioning techniques significantly but unpredictably affect existing wettability. These implied that titanium wettability is significantly influenced by the hydrocarbon pellicle and other contaminants inevitably accumulated. UV treatment may be an effective strategy to standardize wettability by making all titanium surfaces superhydrophilic, thereby allowing the characterization of individual surface topography and chemistry parameters in future studies.
Topics: Wettability; Titanium; Surface Properties; Reproducibility of Results; Hydrophobic and Hydrophilic Interactions; Microscopy, Electron, Scanning; Dental Implants
PubMed: 37834133
DOI: 10.3390/ijms241914688 -
Swiss Dental Journal Jul 2023Two forms of non-carious dental disorder - erosive tooth hard tissue loss and dental erosion - have been increasingly observed in recent years. Dental erosion is the...
Two forms of non-carious dental disorder - erosive tooth hard tissue loss and dental erosion - have been increasingly observed in recent years. Dental erosion is the chemical loss of dental hard substances caused by exposure to acids not derived from oral bacteria. Mechanical forces from, for example, the tongue, the cheeks or toothbrushing, increase loss of partly-demineralized tooth surfaces and the cumulative loss of dental hard tissue is defined as erosive tooth wear (ETW). Dental hard tissue losses which occur because of very frequent acid exposure, such as through increased vomiting, but without mechanical stress, are also assigned to tooth erosion. Without prior softening, practically no loss of enamel takes place due to abrasion with the modern Western diet. The present work is a continuation of earlier work. A total of 226 beverages, food, stimulants as well as medicines and mouthwashes were tested for their erosive potential on premolars and deciduous molars covered with a human pellicle. The influence of temperature, phosphate and calcium was also investigated in additional experiments. The change in hardness before and after immersion in the respective test substance was measured and the erosive potential was classified. For each test product, we determined pH and other properties which were possibly related to erosive potential. There were considerable and sometimes surprising differences between the tested products. The addition of phosphate did not influence the erosive potential of the liquids, but calcium did. A modified erosion scheme is presented, which incorporates these and other new findings.
Topics: Humans; Tooth Erosion; Mouthwashes; Dental Enamel; Central Nervous System Stimulants; Calcium, Dietary; Phosphates
PubMed: 36861647
DOI: No ID Found -
Journal of Dental Research Jul 2023Dental caries remains the most widespread chronic disease worldwide. Basically, caries originates within biofilms accumulated on dental enamel. Despite the nonrenewable...
Dental caries remains the most widespread chronic disease worldwide. Basically, caries originates within biofilms accumulated on dental enamel. Despite the nonrenewable nature of the enamel tissue, targeted preventive strategies are still very limited. We previously introduced customized multifunctional proteinaceous pellicles (coatings) for controlling bacterial attachment and subsequent biofilm succession. Stemmed from our whole proteome/peptidome analysis of the acquired enamel pellicle, we designed these pellicles using hybrid mixtures of the most abundant and complementary-acting antimicrobial and antifouling proteins/peptides for synergetic suppression of early biofilms. In conjugating these domains synthetically, their bioinhibitory efficacy was remarkably boosted. Herein, we sought to explore the key structure-function relationship of these potent hybridized conjugates in comparison with their individual domains, solely or in physical mixtures. Specifically, we interrelated the following facets: physicochemical and 3-dimensional folding characteristics via molecular dynamics simulations, adopted secondary structure by circular dichroism, immobilization capacity on enamel through high-spatial resolution multiphoton microscopy, and biofilm suppression potency. Our data showed consistent associations among the increased preference for protein folding structures, α-helix content, and enamel-immobilization capacity; all were inversely correlated with the attached bioburden. The expressed phenotypes could be explained by the adopted strongly amphipathic helical conformation upon conjugation, mediated by the highly anionic and acidic N-terminal pentapeptide shared region/motif for enhanced immobilization on enamel. In conclusion, conjugating bioactive proteins/peptides is a novel translational approach to engineer robust antibiofilm pellicles for caries prevention. The adopted α-helical conformation is key to enhance the antibiofilm efficacy and immobilization capacity on enamel that are promoted by certain physicochemical properties of the constituent domains. These data are valuable for bioengineering versatile therapeutics to prevent/arrest dental caries, a condition that otherwise requires invasive treatments with substantial health care expenditures.
Topics: Humans; Dental Pellicle; Dental Enamel; Dental Caries; Peptides; Proteins; Biofilms
PubMed: 37082872
DOI: 10.1177/00220345231162336 -
Materials (Basel, Switzerland) Apr 2024Scanning force microscopy (SFM) is one of the most widely used techniques in biomaterials research. In addition to imaging the materials of interest, SFM enables the... (Review)
Review
Scanning force microscopy (SFM) is one of the most widely used techniques in biomaterials research. In addition to imaging the materials of interest, SFM enables the mapping of mechanical properties and biological responses with sub-nanometer resolution and piconewton sensitivity. This review aims to give an overview of using the scanning force microscope (SFM) for investigations on dental materials. In particular, SFM-derived methods such as force-distance curves (scanning force spectroscopy), lateral force spectroscopy, and applications of the FluidFM will be presented. In addition to the properties of dental materials, this paper reports the development of the pellicle by the interaction of biopolymers such as proteins and polysaccharides, as well as the interaction of bacteria with dental materials.
PubMed: 38730904
DOI: 10.3390/ma17092100 -
Clinical Oral Investigations Oct 2023The present study aimed to evaluate the potential of the salivary pellicle (SP) formed on titanium (Ti) surfaces to modulate the formation of a biofilm composed of...
OBJECTIVES
The present study aimed to evaluate the potential of the salivary pellicle (SP) formed on titanium (Ti) surfaces to modulate the formation of a biofilm composed of Streptococcus gordonii, Actinomyces naeslundii, Fusobacterium nucleatum, and Porphyromonas gingivalis.
MATERIALS AND METHODS
Ti substrates were incubated for 2 h with a pool of saliva samples obtained from 10 systemically and periodontally healthy subjects. Enamel substrates were included as a biological reference. Scanning electron microscopy (SEM) and Raman spectroscopy analysis were used to analyze the formation of the salivary pellicle. After the SP formation, the surfaces were incubated for 12 h with a mix of Streptococcus gordonii, Actinomyces naeslundii, Fusobacterium nucleatum, and Porphyromonas gingivalis. The number of bacterial cells attached to each surface was determined by the XTT assay while bacterial viability was analyzed by fluorescence microscopy using the LIVE/DEAD® BacLight kit.
RESULTS
The SEM and Raman spectroscopy analysis confirmed the presence of a salivary pellicle formed on the tested surfaces. Regarding the biofilm formation, the presence of the SP decreases the number of the bacterial cells detected in the test surfaces, compared with the uncover substrates. Even more, the SP-covered substrates showed similar bacterial counts in both Ti and enamel surfaces, meaning that the physicochemical differences of the substrates were less determinant than the presence of the SP. While on the SP-uncover substrates, differences in the bacterial adhesion patterns were directly related to the physicochemical nature of the substrates.
CONCLUSIONS
The salivary pellicle was the main modulator in the development of the biofilm consisting of representative oral bacteria on the Ti substrates.
CLINICAL RELEVANCE
The results of this study provide valuable information on the modulatory effect of the salivary pellicle on biofilm formation; such information allows us to understand better the events involved in the formation of oral biofilms on Ti dental implants.
Topics: Humans; Dental Pellicle; Titanium; Biofilms; Bacterial Adhesion; Streptococcus gordonii; Fusobacterium nucleatum; Surface Properties
PubMed: 37646908
DOI: 10.1007/s00784-023-05230-9 -
Caries Research 2024Erosive tooth wear is a highly prevalent dental condition that is modified by the ever-present salivary pellicle. The aim of the present in situ study was to investigate...
INTRODUCTION
Erosive tooth wear is a highly prevalent dental condition that is modified by the ever-present salivary pellicle. The aim of the present in situ study was to investigate the effect of polyphenols on the ultrastructure of the pellicle formed on dentin in situ and a subsequent erosive challenge.
METHODS
The pellicle was formed on bovine dentin specimens for 3 min or 2 h in 3 subjects. After subjects rinsed with sterile water (negative control), 1% tannic acid, 1% hop extract, or tin/fluoride solution containing 800 ppm tin and 500 ppm fluoride (positive control), specimens were removed from the oral cavity. The erosive challenge was performed on half of the specimens with 1% citric acid, and all specimens were analyzed by transmission electron microscopy. Incorporation of tannic acid in the pellicle was investigated by fluorescence spectroscopy.
RESULTS
Compared to the negative control, ultrastructural analyses reveal a thicker and electron-denser pellicle after application of polyphenols, in which, according to spectroscopy, tannic acid is also incorporated. Application of citric acid resulted in demineralization of dentin, but to a lesser degree when the pellicle was pretreated with a tin/fluoride solution. The pellicle was more acid-resistant than the negative control when modified with polyphenols or tin/fluoride solution.
CONCLUSION
Polyphenols can have a substantial impact on the ultrastructure and acid resistance of the dentin pellicle, while the tin/fluoride solution showed explicit protection against erosive demineralization.
Topics: Humans; Animals; Cattle; Dental Enamel; Dental Pellicle; Fluorides; Tooth Erosion; Tin; Polyphenols; Tin Fluorides; Citric Acid; Dentin
PubMed: 38198764
DOI: 10.1159/000536199