-
The Journal of Thoracic and... Dec 2023Long-term echocardiographic reports on mitral valve (MV) porcine xenograft bioprosthesis (Epic) are lacking, and postreintervention outcomes of failed Epic are unknown.... (Observational Study)
Observational Study
OBJECTIVES
Long-term echocardiographic reports on mitral valve (MV) porcine xenograft bioprosthesis (Epic) are lacking, and postreintervention outcomes of failed Epic are unknown. We aimed to assess the mechanisms and independent predictors of Epic failures and to compare short- and mid-term outcomes according to reintervention type.
METHODS
We included consecutive patients (n = 1397; mean age: 72 ± 8 years; 46% female; mean follow-up: 4.8 years) who received the Epic during mitral valve replacement (MVR) at our institution. Clinical, echocardiographic, reintervention, and outcomes data were retrieved from our prospective institution's database or government statistics.
RESULTS
Gradients and effective orifice area of the Epic were stable over 5-years follow-up. A total of 70 (5%) patients had a MV reintervention at median follow-up of 3.0 (0.7-5.4) years due to prosthesis failure, by redo-MVR (n = 38; 54%), valve-in-valve (n = 19; 27%), paravalvular leak (PVL) closure (n = 12; 17%), or thrombectomy (n = 1). Mechanisms of failure were 27 (1.9%) structural valve deterioration (SVD; all leaflet tear); 16 (1.1%) non-SVD (15 PVL, 1 pannus); 24 (1.7%) endocarditis; and 4 (0.3%) thrombosis. Freedom from all-cause and SVD-related MV reintervention at 10 years are 88% and 92%, respectively. Independent predictors of reintervention were age, baseline atrial fibrillation, initial MV etiology, and moderate or greater PVL at discharge (all P ≤ .05). Comparison of redo-MVR and valve-in-valve revealed no significant difference in early outcomes or mid-term mortality (all P ≥ .16).
CONCLUSIONS
The Epic Mitral valve has stable hemodynamics through 5 years and is associated with low incidence of SVD and reintervention, mostly due to endocarditis and leaflet tear without calcification. Reintervention type had no influence on early outcomes and mid-term mortality.
Topics: Animals; Swine; Humans; Female; Middle Aged; Aged; Aged, 80 and over; Male; Heart Valve Prosthesis Implantation; Prospective Studies; Heart Valve Prosthesis; Prosthesis Failure; Endocarditis; Echocardiography; Bioprosthesis; Aortic Valve; Follow-Up Studies; Prosthesis Design; Treatment Outcome
PubMed: 37423547
DOI: 10.1016/j.jtcvs.2023.06.019 -
RoFo : Fortschritte Auf Dem Gebiete Der... Sep 2023The digital panoramic radiograph (orthopantomogram, OPG) is the standard radiographic technique for basic diagnostics in dental practice. A correctly taken image... (Review)
Review
BACKGROUND
The digital panoramic radiograph (orthopantomogram, OPG) is the standard radiographic technique for basic diagnostics in dental practice. A correctly taken image provides a good overview of teeth and jaw, whereas radiopaque foreign materials, e. g. metal, can obscure relevant findings.
METHODS
A literature review on unexpected metallic foreign bodies in OPG was performed to determine the spectrum of metallic foreign bodies that may cause radiopaque areas on panoramic radiographs in routine clinical use.
RESULTS AND CONCLUSION
A total of 37 different unexpected metallic foreign bodies were found. They can be categorized as jewelry, clothing, personal protective equipment, medical devices, iatrogenic foreign bodies, and rare incidental findings. Radiopaque foreign materials in the OPG are often relatively easy to recognize as artifacts because of their location, and they are avoidable in most cases. If unclear, a three-dimensional radiograph was helpful for determining the location. Radiopaque areas caused by foreign bodies can lead to misinterpretation or partial or complete non-evaluability and should therefore be avoided.
KEY POINTS
· The OPG is the standard radiograph for dentists, oral surgeons, and oral and maxillofacial surgeons.. · Foreign bodies made of metal can lead to non-evaluability of panoramic radiographs. Based on a review of the literature and exemplary radiographs, this article provides an overview of rare but typical metallic foreign bodies in OPG, thus addressing the problem of the subfield of radiography by making radiologists more familiar with these images.. · The spectrum of unexpected metallic foreign bodies includes unremoved earrings with the typical ghost images on the contralateral side, piercings, hearing aids, acupuncture needles, rare iatrogenic foreign bodies, incidental findings in infants in the nose and external auditory canal, vascular clips after surgical interventions, and ritual subcutaneous foreign materials..
CITATION FORMAT
· Brauer HU, Bartols A, Hellmann D et al. Unexpected metallic foreign bodies on panoramic scans - a narrative review. Fortschr Röntgenstr 2023; 195: 809 - 818.
Topics: Infant; Humans; Foreign Bodies; Radiography, Panoramic; Radiography; Prostheses and Implants; Iatrogenic Disease
PubMed: 37160145
DOI: 10.1055/a-2064-9407 -
Medical Science Monitor : International... Jul 2023BACKGROUND We explored a new method for measuring the length of artificial stapes during stapedotomy in otoendoscopic middle-ear surgery using a flexible ruler. MATERIAL... (Randomized Controlled Trial)
Randomized Controlled Trial
BACKGROUND We explored a new method for measuring the length of artificial stapes during stapedotomy in otoendoscopic middle-ear surgery using a flexible ruler. MATERIAL AND METHODS A retrospective analysis was conducted on 56 cases of otosclerosis, comprising 56 ears with a follow-up of over 6 months and complete data. Patients were admitted to the Department of Otology, Huazhong University of Science and Technology Union Shenzhen Hospital from July 2020 to June 2022. SPSS statistical software was used for efficacy analysis. The results of different measurement methods on the implantation time of the prosthesis and postoperative hearing follow-up were compared. RESULTS The 56 patients were randomly divided into 2 groups. In 1 case measured by the metal measuring stick, the prosthesis was too short and was replaced during the operation; 2 patients experienced transient dizziness postoperatively, and the other patients had no surgical complications. All 56 patients had varying degrees of hearing improvement after surgery, and no dislocation of the ossicular chain was observed during the follow-up. There was a statistically significant difference in the implantation time of the prosthesis between the different measurement methods (P<0.05). The improvement in hearing in the flexible ruler group was statistically significant (P<0.05). CONCLUSIONS The selection of the length of the ossicular prosthesis is a crucial step in the operation and can directly affect hearing outcomes. The use of a flexible ruler to measure prosthesis length can significantly shorten operation time and improve hearing, and the ruler is easily obtainable. It is worth promoting its application in ear endoscopic stapedotomy.
Topics: Humans; Stapes; Ossicular Prosthesis; Retrospective Studies; Prosthesis Implantation; Artificial Limbs
PubMed: 37480226
DOI: 10.12659/MSM.940337 -
European Heart Journal Aug 2023
Topics: Humans; Thrombosis; Anticoagulants; Thrombolytic Therapy; Heart Valve Prosthesis; Bioprosthesis; Prosthesis Failure
PubMed: 37264650
DOI: 10.1093/eurheartj/ehad303 -
Acta Neurochirurgica Sep 2023Programmable valve (PV) has been shown as a solution to the high revision rate in pediatric hydrocephalus patients, but it remains controversial among adults. This study...
Long-term follow-up and comparison of programmable and non-programmable ventricular cerebrospinal fluid shunts among adult patients with different hydrocephalus etiologies: a retrospective cohort study.
BACKGROUND
Programmable valve (PV) has been shown as a solution to the high revision rate in pediatric hydrocephalus patients, but it remains controversial among adults. This study is to compare the overall revision rate, revision cause, and revision-free survival between PV and non-programmable valve (NPV) in adult patients with different hydrocephalus etiologies.
METHOD
We reviewed the chart of all patients with hydrocephalus receiving index ventricular cerebrospinal fluid (CSF) shunt operations conducted at a single institution from January 2017 to December 2017. Patients included in the study were followed up for at least 5 years. Statistical tests including independent t-test, chi-square test, and Fisher's exact test were used for comparative analysis, and Kaplan-Meier curve using log-rank test was performed to compare the revision-free survival between the PV and NPV groups.
RESULTS
A total of 325 patients were included in the study, of which 181 patients were receiving PVs and 144 patients receiving NPV. There were 23 patients (12.8%) with PV and 22 patients (15.3%) with NPV receiving initial revision. No significant statistical difference in the initial revision rate was observed between the two groups (p = 0.52). No survival difference was found between the PV and NPV groups. However, better revision-free survival was noted in the PV group among idiopathic normal pressure hydrocephalus (iNPH) (p = 0.0274) and post-traumatic hydrocephalus (p = 0.017).
CONCLUSIONS
The combination of the different etiologies of hydrocephalus and the features of PV and NPV results in different outcomes-revision rate and revision-free survival. PV use might be superior to NPV in iNPH and post-traumatic hydrocephalus patients. Further studies are needed to clarify the indications of PV use in adult hydrocephalus patients.
Topics: Adult; Humans; Cerebrospinal Fluid Shunts; Follow-Up Studies; Hydrocephalus; Prostheses and Implants; Retrospective Studies; Ventriculoperitoneal Shunt
PubMed: 37553445
DOI: 10.1007/s00701-023-05734-z -
In Vivo (Athens, Greece) 2023Silicone implants or tissue expanders placed under the pectoralis major (PM) muscle are often used for breast reconstruction. However, the disruption of PM insertions,... (Review)
Review
Silicone implants or tissue expanders placed under the pectoralis major (PM) muscle are often used for breast reconstruction. However, the disruption of PM insertions, which is often an inevitable part of the surgical procedure, is known to cause PM morbidity and, subsequently, problems with the use of the ipsilateral arm. In this systematic review, we present current knowledge regarding the effect of submuscular silicone-based breast reconstruction on the function of PM and the ipsilateral arm. A search of the relevant English literature was performed through PubMed and ten eligible studies were identified. Articles reporting breast augmentation were accepted as the techniques of implant insertion are similar to reconstruction. Questionnaires reporting the status of the arm, analysis of the range of motion of the shoulder with 3-D video, isometric or isokinetic dynamometry, ultrasound shear-wave elastography, volumetric MRI, electromyography and light and electron microscopy of the PM fibers were used for the assessment of PM and arm status. The insertion of implants under the PM, especially when combined with dissection of some of its insertions, seems to be associated with measurable abnormal microscopic, imaging, and dynamometric findings. However, the intact part of the muscle and possibly other nearby muscular structures are able to compensate for the lost part of PM. Thus, the insertion of implants fully or partially under the PM seems to have no or little effect on the function of the ipsilateral upper limb in daily life.
Topics: Pectoralis Muscles; Silicones; Mammaplasty; Prostheses and Implants; Magnetic Resonance Imaging; Breast Implants
PubMed: 37652471
DOI: 10.21873/invivo.13289 -
Science Advances Oct 2023The current cardiac pacemakers are battery dependent, and the pacing leads are prone to introduce valve damage and infection, plus a complete pacemaker retrieval is...
The current cardiac pacemakers are battery dependent, and the pacing leads are prone to introduce valve damage and infection, plus a complete pacemaker retrieval is needed for battery replacement. Despite the reported wireless bioelectronics to pace the epicardium, open-chest surgery (thoracotomy) is required to implant the device, and the procedure is invasive, requiring prolonged wound healing and health care burden. We hereby demonstrate a fully biocompatible wireless microelectronics with a self-assembled design that can be rolled into a lightweight microtubular pacemaker for intravascular implantation and pacing. The radio frequency was used to transfer energy to the microtubular pacemaker for electrical stimulation. We show that this pacemaker provides effective pacing to restore cardiac contraction from a nonbeating heart and have the capacity to perform overdrive pacing to augment blood circulation in an anesthetized pig model. Thus, this microtubular pacemaker paves the way for the minimally invasive implantation of leadless and battery-free microelectronics.
Topics: Animals; Swine; Cardiac Pacing, Artificial; Pacemaker, Artificial; Prostheses and Implants; Heart; Electric Stimulation; Equipment Design; Treatment Outcome
PubMed: 37851816
DOI: 10.1126/sciadv.adj0540 -
International Journal of Nanomedicine 2023Three-dimensional (3D) printing is serving as the most promising approach to fabricate personalized titanium (Ti) implants for the precise treatment of complex bone... (Review)
Review
Three-dimensional (3D) printing is serving as the most promising approach to fabricate personalized titanium (Ti) implants for the precise treatment of complex bone defects. However, the bio-inert nature of Ti material limits its capability for rapid osseointegration and thus influences the implant lifetime in vivo. Despite the macroscale porosity for promoting osseointegration, 3D-printed Ti implant surface morphologies at the nanoscale have gained considerable attention for their potential to improve specific outcomes. To evaluate the influence of nanoscale surface morphologies on osseointegration outcomes of 3D-printed Ti implants and discuss the available strategies, we systematically searched evidence according to the PRISMA on PubMed, Embase, Web of Science, and Cochrane (until June 2022). The inclusion criteria were in vivo (animal) studies reporting the osseointegration outcomes of nanoscale morphologies on the surface of 3D-printed Ti implants. The risk of bias (RoB) was assessed using the Systematic Review Centre for Laboratory Animal Experimentation (SYRCLE's) tool. The quality of the studies was evaluated using the Animal Research: Reporting of In Vivo Experiments (ARRIVE) guidelines. (PROSPERO: CRD42022334222). Out of 119 retrieved articles, 9 studies met the inclusion criteria. The evidence suggests that irregular nano-texture, nanodots and nanotubes with a diameter of 40-105nm on the surface of porous/solid 3D-printed Ti implants result in better osseointegration and vertical bone ingrowth compared to the untreated/polished ones by significantly promoting cell adhesion, matrix mineralization, and osteogenic differentiation through increasing integrin expression. The RoB was low in 41.1% of items, unclear in 53.3%, and high in 5.6%. The quality of the studies achieved a mean score of 17.67. Our study demonstrates that nanostructures with specific controlled properties on the surface of 3D-printed Ti implants improve their osseointegration. However, given the small number of studies, the variability in experimental designs, and lack of reporting across studies, the results should be interpreted with caution.
Topics: Animals; Osseointegration; Osteogenesis; Titanium; Prostheses and Implants; Printing, Three-Dimensional; Surface Properties; Porosity
PubMed: 37525692
DOI: 10.2147/IJN.S409033 -
Journal of Orthopaedic Surgery and... Dec 2023To propose a surface reconstruction algorithm based on a differential manifold (a space with local Euclidean space properties), which can be used for processing of...
OBJECTIVES
To propose a surface reconstruction algorithm based on a differential manifold (a space with local Euclidean space properties), which can be used for processing of clinical images and for modeling of the atlantoaxial joint. To describe the ideal anatomy of the lateral atlantoaxial articular surface by measuring the anatomical data.
METHODS
Computed tomography data of 80 healthy subjects who underwent cervical spine examinations at our institution were collected between October 2019 and June 2022, including 46 males and 34 females, aged 37.8 ± 5.1 years (28-59 years). A differential manifold surface reconstruction algorithm was used to generate the model based on DICOM data derived by Vision PACS system. The lateral mass articular surface was measured and compared in terms of its sagittal diameter, transverse diameter, articular surface area, articular curvature and joint space height.
RESULTS
There was no statistically significant difference between left and right sides of the measured data in normal adults (P > 0.05). The atlantoaxial articular surface sagittal diameter length was (15.83 ± 1.85) and (16.22 ± 1.57) mm on average, respectively. The transverse diameter length of the articular surface was (16.29 ± 2.16) and (16.49 ± 1.84) mm. The lateral articular surface area was (166.53 ± 7.69) and (174.48 ± 6.73) mm and the curvature was (164.03 ± 5.27) and (153.23 ± 9.03)°, respectively. The joint space height was 3.05 ± 0.11mm, respectively. There is an irregular articular space in the lateral mass of atlantoaxial, and both upper and lower surfaces of the articular space are concave. A sagittal plane view shows that the inferior articular surface of the atlas is mainly concave above; however, the superior articular surface of the axis is mainly convex above. In the coronal plane, the inferior articular surface of the atlas is mostly concave above, with most concave vertices located in the medial region, and the superior articular surface of the axis is mainly concave below, with most convex vertices located centrally and laterally.
CONCLUSION
A differential manifold algorithm can effectively process atlantoaxial imaging data, fit and control mesh topology, and reconstruct curved surfaces to meet clinical measurement applications with high accuracy and efficiency; the articular surface of the lateral mass of atlantoaxial mass in normal adults has relatively constant sagittal diameter, transverse diameter and area. The distance difference between joint spaces is small, but the shape difference of articular surfaces differs greatly.
Topics: Adult; Male; Female; Humans; Cervical Vertebrae; Atlanto-Axial Joint; Prostheses and Implants; Tomography, X-Ray Computed; Physical Examination
PubMed: 38042858
DOI: 10.1186/s13018-023-04410-3 -
Biosensors & Bioelectronics Jul 2024Accurate oxygen sensing and cost-effective fabrication are crucial for the adoption of wearable devices inside and outside the clinical setting. Here we introduce a...
Accurate oxygen sensing and cost-effective fabrication are crucial for the adoption of wearable devices inside and outside the clinical setting. Here we introduce a simple strategy to create nonwoven polymeric fibrous mats for a notable contribution towards addressing this need. Although morphological manipulation of polymers for cell culture proliferation is commonplace, especially in the field of regenerative medicine, non-woven structures have not been used for oxygen sensing. We used an airbrush spraying, i.e. solution blowing, to obtain nonwoven fiber meshes embedded with a phosphorescent dye. The fibers serve as a polymer host for the phosphorescent dye and are shown to be non-cytotoxic. Different composite fibrous meshes were prepared and favorable mechanical and oxygen-sensing properties were demonstrated. A Young's modulus of 9.8 MPa was achieved and the maximum oxygen sensitivity improved by a factor of ∼2.9 compared to simple drop cast film. The fibers were also coated with silicone rubbers to produce mechanically robust sensing films. This reduced the sensing performance but improved flexibility and mechanical properties. Lastly, we are able to capture oxygen concentration maps via colorimetry using a smartphone camera, which should offer unique advantages in wider usage. Overall, the introduced composite fiber meshes show a potential to significantly improve cell cultures and healthcare monitoring via absolute oxygen sensing.
Topics: Oxygen; Biosensing Techniques; Polymers; Prostheses and Implants; Wearable Electronic Devices
PubMed: 38555771
DOI: 10.1016/j.bios.2024.116198