-
Journal of Esthetic and Restorative... Oct 2021This study aimed to compare the color and fluorescence of five dentin ceramic systems with human dentin to enhance shade matching.
OBJECTIVES
This study aimed to compare the color and fluorescence of five dentin ceramic systems with human dentin to enhance shade matching.
MATERIALS AND METHODS
Five dentin ceramic systems, including Vita, GC, Creation, Noritake, and Ivoclar in 16 shades, and 12 human dentins, were prepared. The fluorescence and color coordinates were measured at 380-780 nm. A light source including a visible and a ultraviolet (UV) complemented with a geometry 45° illumination and 0° observer was used. The mean minimum difference in color coordinates and fluorescence efficiency was statistically analyzed before and after UV excitation by one-way ANOVA (p < 0.05). Post-hoc multiple comparisons were performed using the LSD test (p < 0.05).
RESULTS
While the fluorescence efficiency of Noritake and Ivoclar ceramics displayed no significant difference with natural dentin, Vita, GC, and Creation ceramics presented a lower fluorescence compared to the natural dentin (p < 0.05). Noritake and Ivoclar had a better color match with human dentin than the other ceramics. Studying the color differences under UV showed that just Creation offers statistically worse performance than the other ceramic.
CONCLUSIONS
The color and fluorescence of the used different brands of dentin ceramic are not the same as the human dentin. However, Noritake and Ivoclar presented the most similarity.
CLINICAL SIGNIFICANCE
Knowledge of ceramic and natural teeth fluorescence is essential for acceptable reproduction of optical properties in esthetic restorations.
Topics: Ceramics; Color; Dental Porcelain; Dentin; Fluorescence; Humans; Materials Testing
PubMed: 34101330
DOI: 10.1111/jerd.12792 -
Archives of Oral Biology Sep 2022The tufts of human dental enamel are structures located at the enamel-dentin junction and whose origin has not been clearly established. Although studies have...
OBJECTIVE
The tufts of human dental enamel are structures located at the enamel-dentin junction and whose origin has not been clearly established. Although studies have highlighted their protein content and hypomineralization, none has been able to shed light on their 3D structure. The aim of this study was to reveal the whole structure using high-resolution conventional microtomography.
DESIGN
Ten adult mandibular first and second molars and two primary mandibular first molars were sectioned and scanned with microcomputed tomography with a resolution between 4.7 and 5 micrometers. By determining the threshold discriminating dentin and tufts, we were able to reconstruct 3D meshes.
RESULTS
We revealed the exact pattern of the tufts in adult molars and discovered their distribution, their dynamics, and the existence of a regular undulation, forming a particular angle of approximately 30 degrees with the dentin surface. A spatial frequency of approximately 160 micrometers would be compatible with the variation in the orientation of groups of dental enamel rods. In contrast, the present setting is not sufficient to extract similar information for primary teeth.
CONCLUSIONS
Enamel tufts have a specific pattern, with an oriented draped form and are regularly spaced. The possible connection between these undulations and the Hunter-Schreger bands (diazonias and parazonias) needs to be studied.
Topics: Adult; Dental Enamel; Dentin; Humans; Molar; Tooth; X-Ray Microtomography
PubMed: 35738023
DOI: 10.1016/j.archoralbio.2022.105487 -
BMC Oral Health Apr 2024The stability of resin-dentin interfaces is still highly questionable. The aim of this study was to evaluate the effect of Salvadora persica on resin-dentin bond...
BACKGROUND
The stability of resin-dentin interfaces is still highly questionable. The aim of this study was to evaluate the effect of Salvadora persica on resin-dentin bond durability.
MATERIALS AND METHODS
Extracted human third molars were used to provide mid-coronal dentin, which was treated with 20% Salvadora persica extract for 1 min after acid-etching. Microtensile bond strength and interfacial nanoleakage were evaluated after 24 h and 6 months. A three-point flexure test was used to measure the stiffness of completely demineralized dentin sticks before and after treatment with Salvadora persica extract. The hydroxyproline release test was also used to measure collagen degradation by endogenous dentin proteases. Statistical analysis was performed using two-way ANOVA followed by post hoc Bonferroni test and unpaired t-test. P-values < 0.05 were considered statistically significant.
RESULTS
The use of Salvadora persica as an additional primer with etch-and-rinse adhesive did not affect the immediate bond strengths and nanoleakage (p > 0.05). After 6 months, the bond strength of the control group decreased (p = 0.007), and nanoleakage increased (p = 0.006), while Salvadora persica group showed no significant difference in bond strength and nanoleakage compared to their 24 h groups (p > 0.05). Salvadora persica increased dentin stiffness and decreased collagen degradation (p < 0.001) compared to their controls.
CONCLUSION
Salvadora persica extract pretreatment of acid-etched dentin preserved resin-dentin bonded interface for 6 months.
CLINICAL SIGNIFICANCE
Durability of resin-dentin bonded interfaces is still highly questionable. Endogenous dentinal matrix metalloproteinases play an important role in degradation of dentinal collagen within such interfaces. Salvadora persica may preserve resin-dentin interfaces for longer periods of time contributing to greater clinical success and longevity of resin composite restorations.
Topics: Humans; Dentin; Tensile Strength; Plant Extracts; Dental Bonding; Dental Leakage; Salvadoraceae; Acid Etching, Dental; Collagen; Dentin-Bonding Agents; Materials Testing; Hydroxyproline; Dental Stress Analysis; Composite Resins; Time Factors; Resin Cements
PubMed: 38684974
DOI: 10.1186/s12903-024-04244-3 -
Dental Materials Journal Jun 2024This study investigates the effects of dentin's drying time, roughness, and curing modes of resin cement on bond strength. Forty human teeth were divided into eight...
This study investigates the effects of dentin's drying time, roughness, and curing modes of resin cement on bond strength. Forty human teeth were divided into eight groups based on three experimental factors: dentin's roughness by 240-or 600-grit SiC paper (coarse or fine), dentin wetness with air-drying time (5-s or 10-s), and Single Bond Universal adhesive's curing mode by co-curing with RelyX Ultimate cement or light-curing separately (co-curing or light-curing). The micro-tensile bond strength of fifteen resin-dentin stikcs per groups was measured. Failure mode and adhesive layers were observed using stereoscopic and confocal laser scanning microscopy, respectively. The curing mode of the adhesive layer affected the bond strength of the dentin-resin cement (p<0.05). In particular, the light-curing mode exhibited a significantly higher bond strength than the co-curing one (p<0.05). The bond strength between the resin cement and dentin was improved in the 5-s drying groups than in the 10-s drying groups.
Topics: Humans; Dentin; Surface Properties; Resin Cements; Tensile Strength; Dental Bonding; Materials Testing; Dentin-Bonding Agents; Microscopy, Confocal; Bisphenol A-Glycidyl Methacrylate; Dental Stress Analysis; Light-Curing of Dental Adhesives; Time Factors
PubMed: 38719583
DOI: 10.4012/dmj.2023-287 -
Journal of Biomedical Materials... Nov 2019Nearly 100 million of the 170 million composite and amalgam restorations placed annually in the United States are replacements for failed restorations. The primary... (Review)
Review
Nearly 100 million of the 170 million composite and amalgam restorations placed annually in the United States are replacements for failed restorations. The primary reason both composite and amalgam restorations fail is recurrent decay, for which composite restorations experience a 2.0-3.5-fold increase compared to amalgam. Recurrent decay is a pernicious problem-the standard treatment is replacement of defective composites with larger restorations that will also fail, initiating a cycle of ever-larger restorations that can lead to root canals, and eventually, to tooth loss. Unlike amalgam, composite lacks the inherent capability to seal discrepancies at the restorative material/tooth interface. The low-viscosity adhesive that bonds the composite to the tooth is intended to seal the interface, but the adhesive degrades, which can breach the composite/tooth margin. Bacteria and bacterial by-products such as acids and enzymes infiltrate the marginal gaps and the composite's inability to increase the interfacial pH facilitates cariogenic and aciduric bacterial outgrowth. Together, these characteristics encourage recurrent decay, pulpal damage, and composite failure. This review article examines key biological and physicochemical interactions involved in the failure of composite restorations and discusses innovative strategies to mitigate the negative effects of pathogens at the adhesive/dentin interface. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B:2466-2475, 2019.
Topics: Adhesives; Dental Materials; Dental Restoration, Permanent; Dentin; Humans
PubMed: 30895695
DOI: 10.1002/jbm.b.34358 -
Lasers in Medical Science Nov 2023This systematic review provides an overview of the main chemical and morphological alterations generated on dentin by different high-power lasers' irradiation. (Review)
Review
PURPOSE
This systematic review provides an overview of the main chemical and morphological alterations generated on dentin by different high-power lasers' irradiation.
METHODS
The review was registered in PROSPERO (CRD42023394164) and PRISMA guidelines were followed. The search strategy was conducted on MEDLINE (PubMed), Embase (Elsevier), and Web of Science (Clarivate) databases. The eligibility criteria were established according to the PICOS strategy, focusing on in vitro and ex vivo studies that assessed the chemical and morphological changes in dentin using five high-power lasers: Nd:YAG (1064 nm), Er:YAG (2940 nm), Er, Cr:YSGG (2780 nm), diode (980 nm), and CO (10,600 nm). Publication range was from 2010 to 2022. Data was summarized in tables and risk of bias was assessed by QUIN tool.
RESULTS
The search resulted in 2255 matches and 57 studies composed the sample. The methods most used to assess the outcomes were scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), and Raman. The studies presented "medium" and "low" risk of bias. The laser prevalently identified was the Er:YAG laser, associated with dentin ablation, absence of smear layer, and exposed tubules. The Nd:YAG laser generated vitreous surface and thermal damage, such as carbonization and cracks. The other lasers caused an irregular surface and no adverse thermal effects. Regarding the chemical structure, only the Er,Cr:YSGG laser caused collagen matrix reduction. The effects found were more intense with higher dosimetry.
CONCLUSION
Evidence available indicates that the irradiation of dentin with high-power lasers are related to morphological outcomes favorable to adhesive restorative procedures, with minimal changes in collagen matrix and mineral content. However, those observations should be carried carefully by clinicians and more clinical trials regarding the association of high-power laser irradiation and restorative procedure longevity are needed.
Topics: Dentin; Lasers, Solid-State; Microscopy, Electron, Scanning; Spectrometry, X-Ray Emission; Collagen
PubMed: 37932490
DOI: 10.1007/s10103-023-03912-0 -
PLoS Pathogens May 2024The role of bacteria in the etiology of dental caries is long established, while the role of fungi has only recently gained more attention. The microbial invasion of...
The role of bacteria in the etiology of dental caries is long established, while the role of fungi has only recently gained more attention. The microbial invasion of dentin in advanced caries especially merits additional research. We evaluated the fungal and bacterial community composition and spatial distribution within carious dentin. Amplicon 16S rRNA gene sequencing together with quantitative PCR was used to profile bacterial and fungal species in caries-free children (n = 43) and 4 stages of caries progression from children with severe early childhood caries (n = 32). Additionally, healthy (n = 10) and carious (n = 10) primary teeth were decalcified, sectioned, and stained with Grocott's methenamine silver, periodic acid Schiff (PAS) and calcofluor white (CW) for fungi. Immunolocalization was also performed using antibodies against fungal β-D-glucan, gram-positive bacterial lipoteichoic acid, gram-negative endotoxin, Streptococcus mutans, and Candida albicans. We also performed field emission scanning electron microscopy (FESEM) to visualize fungi and bacteria within carious dentinal tubules. Bacterial communities observed included a high abundance of S. mutans and the Veillonella parvula group, as expected. There was a higher ratio of fungi to bacteria in dentin-involved lesions compared to less severe lesions with frequent preponderance of C. albicans, C. dubliniensis, and in one case C. tropicalis. Grocott's silver, PAS, CW and immunohistochemistry (IHC) demonstrated the presence of fungi within carious dentinal tubules. Multiplex IHC revealed that fungi, gram-negative, and gram-positive bacteria primarily occupied separate dentinal tubules, with rare instances of colocalization. Similar findings were observed with multiplex immunofluorescence using anti-S. mutans and anti-C. albicans antibodies. Electron microscopy showed monomorphic bacterial and fungal biofilms within distinct dentin tubules. We demonstrate a previously unrecognized phenomenon in which fungi and bacteria occupy distinct spatial niches within carious dentin and seldom co-colonize. The potential significance of this phenomenon in caries progression warrants further exploration.
Topics: Humans; Dental Caries; Dentin; Male; Child; Female; Child, Preschool; Bacteria; Fungi; RNA, Ribosomal, 16S
PubMed: 38805482
DOI: 10.1371/journal.ppat.1011865 -
Brazilian Dental Journal 2023Considering the side effects in the oral cavity and dental structures of radiotherapy (RDT) for head and neck cancer, this study aimed to evaluate the effects of RDT on... (Randomized Controlled Trial)
Randomized Controlled Trial
Considering the side effects in the oral cavity and dental structures of radiotherapy (RDT) for head and neck cancer, this study aimed to evaluate the effects of RDT on the root dentin concerning the obliteration of dentinal tubules, the inorganic composition of intra-radicular dentin, and the integrity of collagen fibers. Thirty human canines were selected from a biobank and randomly divided into two groups (n=15). The samples were sectioned buccolingually, and a hemisection was used for structural analysis by scanning electron microscopy (SEM) and energy-dispersive X-ray spectrometer (EDS). Low-vacuum SEM images were obtained at 2000-x magnification to observe the obliteration of the dentinal tubules. Moreover, compositional evaluation was performed using EDS. After RDT, the SEM and EDS analyses were repeated using the same methodology. RDT was applied fractionally at 2 Gy per day, 5 days per week, for 7 weeks, resulting in a total dose of 70 Gy. The collagen integrity of the irradiated and non-irradiated samples was analyzed using Masson's trichrome and picrosirius red staining polarization microscopy. Samples subjected to RDT exhibited dentinal tubule obliteration (p < 0.001); low integrity of type I and III collagen fibers (p < 0.05); compositional reduction of calcium (p = 0.012), phosphorus (p = 0.001), and magnesium (p < 0.001); an increased Ca/P ratio (p < 0.001). RDT affects the structure of dentinal tubules, the inorganic composition of intra-radicular dentin, and the collagen fiber integrity in the root dentin, which may interfere with the effectiveness and durability of dental procedures.
Topics: Humans; Calcium; Collagen; Dentin; Microscopy, Electron, Scanning; Phosphorus; Tooth Root
PubMed: 36888844
DOI: 10.1590/0103-6440202305101 -
Journal of Dentistry Jun 2021A better understanding of the microstructure and mechanical properties of enamel and dentine may enable practitioners to apply the current adhesive dentistry protocols... (Review)
Review
OBJECTIVES
A better understanding of the microstructure and mechanical properties of enamel and dentine may enable practitioners to apply the current adhesive dentistry protocols to clinical cases involving dentine disorders (dentinogenesis imperfecta or dentine dysplasia).
DATA/SOURCES
Publications (up to June 2020) investigating the microstructure of dentine disorders were browsed in a systematic search using the PubMed/Medline, Embase and Cochrane Library electronic databases. Two authors independently selected the studies, extracted the data in accordance with the PRISMA statement, and assessed the risk of bias with the Critical Appraisal Checklist. A Mann-Whitney U test was computed to compare tissues damage related to the two dentine disorders of interest.
STUDY SELECTION
From an initial total of 642 studies, only 37 (n = 164 teeth) were included in the present analysis, among which 18 investigating enamel (n = 70 teeth), 15 the dentine-enamel junction (n = 62 teeth), and 35 dentine (n = 156 teeth). Dentine is damaged in cases of dentinogenesis imperfecta and osteogenesis imperfecta (p = 2.55E-21 and p = 3.99E-21, respectively). These studies highlight a reduction in mineral density, hardness, modulus of elasticity and abnormal microstructure in dentine disorders. The majority of studies report an altered dentine-enamel junction in dentinogenesis imperfecta and in osteogenesis imperfecta (p = 6.26E-09 and p = 0.001, respectively). Interestingly, enamel is also affected in cases of dentinogenesis imperfecta (p = 0.0013), unlike to osteogenesis imperfecta (p = 0.056).
CONCLUSIONS
Taking into account all these observations, only a few clinical principles may be favoured in the case of adhesive cementation: (i) to preserve the residual enamel to enhance bonding, (ii) to sandblast the tooth surfaces to increase roughness, (iii) to choose a universal adhesive and reinforce enamel and dentine by means of infiltrant resins. As these recommendations are mostly based on in vitro studies, future in vivo studies should be conducted to confirm these hypotheses.
Topics: Dental Cements; Dental Enamel; Dentin; Hardness; Tooth
PubMed: 33798638
DOI: 10.1016/j.jdent.2021.103654 -
Journal of Trace Elements in Medicine... Jul 2022Dentin hydroxyapatite possesses a unique versatile structure which allows it to undergo ionic substitutions. Trace elements play pivotal roles within the oral cavity,... (Review)
Review
Dentin hydroxyapatite possesses a unique versatile structure which allows it to undergo ionic substitutions. Trace elements play pivotal roles within the oral cavity, especially in dentin apatite tissue. Therefore, it is critical to explore the role of these elements in dentin apatite structure. The roles of other inorganic elements in dentin apatite were discussed in part I (Mg, Sr, Zn, and Fe) and part II (Cu, Mn, Si, and Li) of these series. In the last part of the review series, the role of selenium, fluorine, silver, and boron in the regulation of dentin apatite structure and function was discussed. We evaluated how these elements affect the overall size, morphology, and crystallinity of dentin apatite crystals. Moreover, we investigated the importance of these elements in regulating the solubility of dentin apatite. An electronic search was performed on the role of these trace elements in dentin apatite from January 2010 to January 2022. The concentration of selenium in teeth has been explored only recently, particularly its incorporation into dentin apatite. Silver nanomaterials inhibit the growth of cariogenic microorganisms as well as arrest the degradation of collagen. Fluorine was found to have important roles in dentin remineralization and dentinal tubule occlusion, making it widely used for hydroxyapatite doping. Boron is critical for mineralized tissues like bone, dentin, and enamel, but its exact role in dentin apatite is unknown. Therefore, understanding the impact of these elements on dentin apatite is potentially transformative, as it may help to fill a significant knowledge gap in teeth mechanics.
Topics: Apatites; Boron; Dentin; Fluorides; Fluorine; Hydroxyapatites; Selenium; Silver; Trace Elements
PubMed: 35569285
DOI: 10.1016/j.jtemb.2022.126990