-
Journal of Dental Research Feb 2015Dentin can be described as a biological composite with collagen matrix embedded with nanosized hydroxyapatite mineral crystallites. Matrix metalloproteinases (MMPs) and... (Review)
Review
Dentin can be described as a biological composite with collagen matrix embedded with nanosized hydroxyapatite mineral crystallites. Matrix metalloproteinases (MMPs) and cysteine cathepsins are families of endopeptidases. Enzymes of both families are present in dentin and collectively capable of degrading virtually all extracellular matrix components. This review describes these enzymes and their presence in dentin, mainly focusing on their role in dentin caries pathogenesis and loss of collagen in the adhesive hybrid layer under composite restorations. MMPs and cysteine cathepsins present in saliva, mineralized dentin, and/or dentinal fluid may affect the dentin caries process at the early phases of demineralization. Changes in collagen and noncollagenous protein structure may participate in observed decreases in mechanical properties of caries-affected dentin and reduce the ability of caries-affected dentin to remineralize. These endogenous enzymes also remain entrapped within the hybrid layer during the resin infiltration process, and the acidic bonding agents themselves (irrespective of whether they are etch-and-rinse or self-etch) can activate these endogenous protease proforms. Since resin impregnation is frequently incomplete, denuded collagen matrices associated with free water (which serves as a collagen cleavage reagent for these endogenous hydrolase enzymes) can be enzymatically disrupted, finally contributing to the degradation of the hybrid layer. There are multiple in vitro and in vivo reports showing that the longevity of the adhesive interface is increased when nonspecific enzyme-inhibiting strategies are used. Different chemicals (i.e., chlorhexidine, galardin, and benzalkonium chloride) or collagen cross-linker agents have been successfully employed as therapeutic primers in the bonding procedure. In addition, the incorporation of enzyme inhibitors (i.e., quaternary ammonium methacrylates) into the resin blends has been recently promoted. This review will describe MMP functions in caries and hybrid layer degradation and explore the potential therapeutic role of MMP inhibitors for the development of improved intervention strategies for MMP-related oral diseases.
Topics: Cathepsins; Collagen; Dental Bonding; Dental Caries; Dental Materials; Dentin; Disease Progression; Humans; Matrix Metalloproteinase Inhibitors; Matrix Metalloproteinases
PubMed: 25535202
DOI: 10.1177/0022034514562833 -
Tissue Engineering and Regenerative... Aug 2022Dentin is a permeable tubular composite and complex structure, and in weight, it is composed of 20% organic matrix, 10% water, and 70% hydroxyapatite crystalline matrix.... (Review)
Review
BACKGROUND
Dentin is a permeable tubular composite and complex structure, and in weight, it is composed of 20% organic matrix, 10% water, and 70% hydroxyapatite crystalline matrix. Demineralization of dentin with gradient concentrations of ethylene diamine tetraacetic acid, 0.6 N hydrochloric acid, or 2% nitric acid removes a major part of the crystalline apatite and maintains a majority of collagen type I and non-collagenous proteins, which creates an osteoinductive scaffold containing numerous matrix elements and growth factors. Therefore, demineralized dentin should be considered as an excellent naturally-derived bioactive material to enhance dental and alveolar bone tissues regeneration.
METHOD
The PubMed and Midline databases were searched in October 2021 for the relevant articles on treated dentin matrix (TDM)/demineralized dentin matrix (DDM) and their potential roles in tissue regeneration.
RESULTS
Several studies with different study designs evaluating the effect of TDM/DDM on dental and bone tissues regeneration were found. TDM/DDM was obtained from human or animal sources and processed in different forms (particles, liquid extract, hydrogel, and paste) and different shapes (sheets, slices, disc-shaped, root-shaped, and barrier membranes), with variable sizes measured in micrometers or millimeters, demineralized with different protocols regarding the concentration of demineralizing agents and exposure time, and then sterilized and preserved with different techniques. In the act of biomimetic acellular material, TDM/DDM was used for the regeneration of the dentin-pulp complex through direct pulp capping technique, and it was found to possess the ability to activate the odontogenic differentiation of stem cells resident in the pulp tissues and induce reparative dentin formation. TDM/DDM was also considered for alveolar ridge and maxillary sinus floor augmentations, socket preservation, furcation perforation repair, guided bone, and bioroot regenerations as well as bone and cartilage healing.
CONCLUSION
To our knowledge, there are no standard procedures to adopt a specific form for a specific purpose; therefore, future studies are required to come up with a well-characterized TDM/DDM for each specific application. Likely as decellularized dermal matrix and prospectively, if the TDM/DDM is supplied in proper consistency, forms, and in different sizes with good biological properties, it can be used efficiently instead of some widely-used regenerative biomaterials.
Topics: Animals; Bone Regeneration; Bone and Bones; Dentin; Humans; Sinus Floor Augmentation
PubMed: 35429315
DOI: 10.1007/s13770-022-00438-4 -
Journal of Bone and Mineral Research :... Feb 2022Considerable amount of research has been focused on dentin mineralization, odontoblast differentiation, and their application in dental tissue engineering. However, very...
Considerable amount of research has been focused on dentin mineralization, odontoblast differentiation, and their application in dental tissue engineering. However, very little is known about the differential role of functionally and spatially distinct types of dental epithelium during odontoblast development. Here we show morphological and functional differences in dentin located in the crown and roots of mouse molar and analogous parts of continuously growing incisors. Using a reporter (DSPP-cerulean/DMP1-cherry) mouse strain and mice with ectopic enamel (Spry2 ;Spry4 ), we show that the different microstructure of dentin is initiated in the very beginning of dentin matrix production and is maintained throughout the whole duration of dentin growth. This phenomenon is regulated by the different inductive role of the adjacent epithelium. Thus, based on the type of interacting epithelium, we introduce more generalized terms for two distinct types of dentins: cementum versus enamel-facing dentin. In the odontoblasts, which produce enamel-facing dentin, we identified uniquely expressed genes (Dkk1, Wisp1, and Sall1) that were either absent or downregulated in odontoblasts, which form cementum-facing dentin. This suggests the potential role of Wnt signalling on the dentin structure patterning. Finally, we show the distribution of calcium and magnesium composition in the two developmentally different types of dentins by utilizing spatial element composition analysis (LIBS). Therefore, variations in dentin inner structure and element composition are the outcome of different developmental history initiated from the very beginning of tooth development. Taken together, our results elucidate the different effects of dental epithelium, during crown and root formation on adjacent odontoblasts and the possible role of Wnt signalling which together results in formation of dentin of different quality. © 2021 The Authors. Journal of Bone and Mineral Research published by Wiley Periodicals LLC on behalf of American Society for Bone and Mineral Research (ASBMR).
Topics: Animals; Cell Differentiation; Dentin; Epithelium; Extracellular Matrix Proteins; Incisor; Mice; Odontoblasts; Odontogenesis
PubMed: 34783080
DOI: 10.1002/jbmr.4471 -
Frontiers in Bioscience (Elite Edition) Jan 2011Hard tissue is difficult to repair especially dental structures. Tooth enamel is incapable of self-repairing whereas dentin and cementum can regenerate with limited... (Review)
Review
Hard tissue is difficult to repair especially dental structures. Tooth enamel is incapable of self-repairing whereas dentin and cementum can regenerate with limited capacity. Enamel and dentin are commonly under the attack by caries. Extensive forms of caries destroy enamel and dentin and can lead to dental pulp infection. Entire pulp amputation followed by the pulp space disinfection and filling with an artificial rubber-like material is employed to treat the infection -- commonly known as root canal or endodontic therapy. Regeneration of dentin relies on having vital pulps; however, regeneration of pulp tissue has been difficult as the tissue is encased in dentin without collateral blood supply except from the root apical end. With the advent of modern tissue engineering concept and the discovery of dental stem cells, regeneration of pulp and dentin has been tested. This article will review the recent endeavor on pulp and dentin tissue engineering and regeneration. The prospective outcomes of current advancements and challenges in this line of research are discussed.
Topics: Dental Pulp; Dentin; Humans; Regeneration; Stem Cells; Tissue Engineering
PubMed: 21196351
DOI: 10.2741/e286 -
Regenerative Medicine Sep 2009Dental pulp tissue is vulnerable to infection. Entire pulp amputation followed by pulp-space disinfection and filling with an artificial rubber-like material is employed... (Review)
Review
Dental pulp tissue is vulnerable to infection. Entire pulp amputation followed by pulp-space disinfection and filling with an artificial rubber-like material is employed to treat the infection - commonly known as root-canal therapy. Regeneration of pulp tissue has been difficult as the tissue is encased in dentin without collateral blood supply except from the root apical end. However, with the advent of the concept of modern tissue engineering and the discovery of dental stem cells, regeneration of pulp and dentin has been tested. This article will review the early attempts to regenerate pulp tissue and the current endeavor of pulp and dentin tissue engineering, and regeneration. The prospective outcome of the current advancement in this line of research will be discussed.
Topics: Animals; Cell Differentiation; Dental Pulp; Dentin; Humans; Mesenchymal Stem Cells; Mice; Regeneration; Regenerative Medicine; Tissue Engineering
PubMed: 19761395
DOI: 10.2217/rme.09.45 -
Brazilian Oral Research 2018This study aimed to evaluate the influence of different ethanol concentrations on dentin roughness, surface free energy, and contact angle between AH Plus and the root...
This study aimed to evaluate the influence of different ethanol concentrations on dentin roughness, surface free energy, and contact angle between AH Plus and the root canal dentin. One hundred human maxillary anterior teeth were split longitudinally and 200 dentin specimens were polished to make the surface flatter and smoother. An acrylic bar was positioned between two dentin specimens and impression material was added to create a block, simulating an instrumented root canal space. Specimens were removed from the mold and cleaned in an ultrasonic bath for 10 min. Thereafter, dentin specimens were divided into four groups (n = 50) according to the drying methods used: a) wet: vacuum only, b) paper points: vacuum + absorbent paper points, c) 70% alcohol: 70% alcohol (1 min) + vacuum + absorbent paper points, and d) 100% alcohol: 100% alcohol (1 min) + vacuum + absorbent paper points. A rugosimeter and a goniometer were used to verify the roughness (Ra) and to measure the surface free energy and the contact angle between the AH Plus sealer and the root canal dentin. ANOVA and Tukey tests (α = 0.05) were used for statistical analysis. The 70% and 100% ethanol groups showed significantly decreased roughness as well as increased surface free energy in the root canal dentin when compared to the wet and paper point groups. In addition, ethanol significantly reduced the contact angle between the AH Plus sealer and the root canal dentin. Ethanol solutions (70% and 100%) provide better wettability of AH Plus sealer on dentin surfaces.
Topics: Analysis of Variance; Dental Bonding; Dentin; Epoxy Resins; Ethanol; Humans; Materials Testing; Reproducibility of Results; Root Canal Filling Materials; Surface Properties; Tooth Root; Wettability
PubMed: 29723333
DOI: 10.1590/1807-3107bor-2018.vol32.0033 -
The International Journal of... Feb 1995Extracellular matrix components and cell-derived microstructures are implicated in mineralization processes which occur in dental tissues. The respective role(s) of... (Review)
Review
Extracellular matrix components and cell-derived microstructures are implicated in mineralization processes which occur in dental tissues. The respective role(s) of collagenic and non-collagenic matrix components are reviewed: phosphorylated and non-phosphorylated proteins, proteoglycans and phosphpholipids. Space-filling amphiphilic molecules seem to play an important role in the preorganization and oriented deposition of calcium phosphate on structures serving more or less as passive support in dentine as well as in enamel.
Topics: Amelogenesis; Animals; Dentin; Dentinogenesis; Humans; Microscopy, Electron; Minerals; Odontogenesis; Tooth
PubMed: 7626424
DOI: No ID Found -
Journal of Oral Biosciences Mar 2023Bone, platelet concentrate, and tooth-derived dentin/cementum have been used as autologous materials in regenerative medicine Dentin materials were first recycled in... (Review)
Review
OBJECTIVES
Bone, platelet concentrate, and tooth-derived dentin/cementum have been used as autologous materials in regenerative medicine Dentin materials were first recycled in 2002 for bone regeneration in humans, although bone autografts were noted in the 19th century, and auto-platelet concentrates were developed in 1998. Dentin/cementum-based material therapy has been applied as an innovative technique for minimally invasive bone surgery, while bone autografts are associated with donor site morbidity.
METHODS
In October 2021, PubMed, Google Scholar, Scopus, and the Cochrane Library databases from 1980 to 2020 were screened.
RESULTS
The demineralized dentin/cementum matrix (DDM) had better performance in bone induction and bone regeneration than mineralized dentin.
CONCLUSIONS
Unlike cell culture therapy, DDM is a matrix-based therapy that includes growth factors. A matrix-based system is a realistic and acceptable treatment, even in developing countries. The aim of this review was to summarize the evidence related to both animal studies and human clinical cases using human dentin materials with a patch of cementum, especially DDM.
Topics: Animals; Humans; Dentin; Bone Regeneration; Animals, Laboratory; Dental Cementum
PubMed: 36336319
DOI: 10.1016/j.job.2022.10.003 -
Journal of Dental Research Sep 2019The evolution of bonded restorations has undergone great progress over several decades. Nonetheless, life spans of bonded restorations are limited mainly because of the...
The evolution of bonded restorations has undergone great progress over several decades. Nonetheless, life spans of bonded restorations are limited mainly because of the eventual incidence of recurrent caries. Over time, water and waterborne agents (acids, enzymes) degrade the components of the dentin/restoration interface, allowing bacterial colonization and dentin reinfection at the margins of the restoration. We developed a 2-tier protective technology consisting of priming/coating dentin with amphipathic and antimicrobial peptides (AAMPs) to obtain hydrophobic/water-repellent and antibiofilm dentin-resisting recurrent caries around bonded restorations. We tested a series of AAMPs to assess their structure-function relationships as well as the effects of different dentin-conditioning methods on the structural features of AAMP-coated dentin. We found relation between the secondary structure of AAMPs (high portion of β-sheet), the antimicrobial potency of AAMPs, and the AAMPs' ability to form hydrophobic coatings on dentin. We also determined that AAMPs had preferential adsorption on the mineral phase of dentin, which suggested that peptides arrange their cationic and hydrophilic motifs in direct contact with the negatively charged minerals in the hydrophilic dentin. These results led us to explore different dentin-conditioning methods that would increase the mineral/collagen ratio and their effect on AAMP immobilization. We innovatively imaged the spatial distribution of the AAMPs in relation to the dentinal tubules and collagen network using a minimally invasive multimodal imaging technique: multiphoton-second harmonic generation. Using multiphoton-second harmonic generation imaging, we determined that partial deproteinization of dentin increased the amount of immobilized AAMPs as compared with the total etched dentin at the dentin surface and extended deeply around dentinal tubules. Last, we analyzed the release rate of AAMPs from dentin coatings in artificial saliva to predict their stability in the clinical setting. In conclusion, priming dentin with AAMPs is a versatile new approach with potential to fortify the otherwise vulnerable adhesive-based interfaces.
Topics: Animals; Antimicrobial Cationic Peptides; Cattle; Dental Bonding; Dental Caries; Dental Restoration, Permanent; Dentin; Dentin-Bonding Agents; Mice; NIH 3T3 Cells
PubMed: 31313946
DOI: 10.1177/0022034519863772 -
Journal of Dental Research Aug 2014The aim of this study was to systematically review the literature for in vitro and ex vivo studies that evaluated the effect of matrix metalloproteinase (MMP) inhibitors... (Meta-Analysis)
Meta-Analysis Review
The aim of this study was to systematically review the literature for in vitro and ex vivo studies that evaluated the effect of matrix metalloproteinase (MMP) inhibitors during the adhesive procedure on the immediate and long-term resin-dentin bond strength. The search was conducted in 6 databases with no publication year or language limits, following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement. From 1,336 potentially eligible studies, 48 were selected for full-text analysis, and 30 were included for review, with 17 considered in the meta-analysis. Two reviewers independently selected the studies, extracted the data, and assessed the risk of bias. Pooled effect estimates were expressed as the weighted mean difference between groups. The most used MMP inhibitor was chlorhexidine (CHX). Immediate bond strength results showed no difference between 2% CHX and control; however, a difference was found between 0.2% CHX and control at baseline. After aging, CHX presented higher bond strength values compared to control groups (p < .05). However, this was not observed for longer periods of aging. High heterogeneity was found in some comparisons, especially for the water storage aging subgroup. Subgroup analyses showed that self-etching and etch-and-rinse adhesives are benefited by the CHX use. From the studies included, only 1 presented low risk of bias, while the others showed medium or high risk of bias. The use of MMP inhibitors did not affect the immediate bond strength overall, while it influenced the aged bond strength. Aging procedures influenced bond strength values of the dentin adhesion stability.
Topics: Acid Etching, Dental; Chlorhexidine; Dental Bonding; Dentin; Humans; Matrix Metalloproteinase Inhibitors; Stress, Mechanical; Time Factors
PubMed: 24935066
DOI: 10.1177/0022034514538046