-
Brazilian Dental Journal 2019This study evaluated the immediate and 6-month dentin bond strength of universal adhesives used in etch-and-rinse or self-etch bonding strategies. The adhesives tested...
This study evaluated the immediate and 6-month dentin bond strength of universal adhesives used in etch-and-rinse or self-etch bonding strategies. The adhesives tested were Ambar Universal, G-Bond, Single Bond Universal, Tetric N-Bond Universal, and Ybond Universal. Gold standard adhesives (Scotchbond Multipurpose Plus and Clearfil SE Bond) were controls. Microtensile dentin bond strength (n=5 teeth), pH, and C=C conversion (n=3) were evaluated. Data were analyzed at α=0.05. All adhesives showed differences in pH. Ybond had intermediately strong aggressiveness, whereas the others were ultra-mild. The C=C conversion was different in most adhesives. In the etch-and-rinse strategy, all adhesives showed similar results generally except for G-Bond, which had lower bond strength than most adhesives. G-Bond and Tetric-N-Bond showed lower bond strengths after 6 months compared with 24 h, whereas the other adhesives had stable dentin bonds. In the self-etch strategy, G-Bond had lower bond strength than most adhesives. After 6 months, Ambar was the only adhesive showing lower dentin bond strength compared with 24 h. Most adhesives had discreet drops in bond strength during aging when used in the self-etch strategy. The failure modes were also material dependent, with a general pattern of increased adhesive and/or pre-testing failures after storage. In conclusion, the bonding performance of universal adhesives to dentin is material dependent. Most adhesives had stable dentin bonds with results comparable to the gold standard materials, particularly when applied in the self-etch mode. In general, it seems the use of universal adhesives in dentin should not be preceded by phosphoric acid etching.
Topics: Adhesives; Dental Bonding; Dental Cements; Dentin; Dentin-Bonding Agents; Materials Testing; Resin Cements; Tensile Strength
PubMed: 31596331
DOI: 10.1590/0103-6440201902578 -
Brazilian Dental Journal 2022Thisstudy aimed to evaluate the effect of the electric current direction application on the resin composite-dentin bond strength using three adhesive systems. Human...
Thisstudy aimed to evaluate the effect of the electric current direction application on the resin composite-dentin bond strength using three adhesive systems. Human molar teeth were distributed according to the adhesive system (two-step self-etch - Clearfil SE Bond, Kuraray [CSE]; one-step self-etch - Single Bond Universal, 3M ESPE [SBU]; and two-step etch-and-rinse - Adper Single Bond 2, 3M ESPE [SB2]), electric current direction (without electric current - control, direct and reverse electric currents - 35µA), and storage time (24h - immediate and 6 months). Resin composite blocks (Filtek Z350XT, 3M ESPE) were bonded to dentin. The teeth/resin composites specimens were stored in distilled water at 37ºC for 24 hours and 6 months for the microtensile bond strength (µTBS) test (n = 10; ~12 sticks for each tooth). Failure patterns were analyzed on a stereomicroscope and classified as cohesive-dentin, cohesive-resin, adhesive or mixed. Adhesive penetration into dentin and hybrid layer formation were evaluated in a scanning electron microscope (n = 6). Data were submitted to a three-way ANOVA followed by Tukey's post hoc test (α = 0.05). There are no differences in µTBS when the adhesive systems were applied under direct and reverse electric currents, but both electric currents increased the µTBS for all adhesive systems. SBU showed the lowest µTBS values for control groups in both storage times and direct electric current in 6 months of storage. The adhesive failure pattern was more frequently observed in all groups. The electric current formed long resin tags for all adhesive systems. Storage for 6 months did not significantly decrease µTBS values. Both directions of electric current (positive and negative charges) at 35µA can increase the µTBS of the adhesive systems tested to dentin.
Topics: Humans; Dental Cements; Dentin
PubMed: 36477969
DOI: 10.1590/0103-6440202204870 -
Journal of Endodontics Aug 2022Dental pulp fibroblasts (DPFs) are the most abundant cell type in the dental pulp. They play pivotal roles; however, they are often mistaken to be involved only in the... (Review)
Review
INTRODUCTION
Dental pulp fibroblasts (DPFs) are the most abundant cell type in the dental pulp. They play pivotal roles; however, they are often mistaken to be involved only in the repair and maintenance of this connective tissue.
METHODS
We used the search terms "pulp fibroblast," "complement system proteins," "pulp inflammation," "angiogenesis," and "dentin pulp regeneration" to identify articles from the PubMed and Scopus databases.
RESULTS
These sentinel cells produce all complement system proteins participating in defense processes, control of inflammation, and dentin-pulp regeneration; produce several proinflammatory cytokines and chemokines and express pattern-recognition receptors, demonstrating their involvement in immunoregulatory mechanisms; express neuropeptides and their receptors, playing an important role in neurogenic inflammation and dental pulp wound healing; secrete angiogenic growth factors as well as neurotrophic proteins, essential for dentin-pulp regeneration; regulate neuronal plasticity processes; and can sense the external environment.
CONCLUSIONS
This review highlights that DPFs are more than mere passive cells in pulp biology and presents an integrative analysis of their roles and functions.
Topics: Complement System Proteins; Dental Pulp; Dentin; Fibroblasts; Humans; Inflammation; Regeneration
PubMed: 35577145
DOI: 10.1016/j.joen.2022.05.004 -
Medicina (Kaunas, Lithuania) Dec 2023: Regenerative dentistry aims to regenerate the pulp-dentin complex and restore those of its functions that have become compromised by pulp injury and/or inflammation.... (Review)
Review
: Regenerative dentistry aims to regenerate the pulp-dentin complex and restore those of its functions that have become compromised by pulp injury and/or inflammation. Scaffold-based techniques are a regeneration strategy that replicate a biological environment by utilizing a suitable scaffold, which is considered crucial for the successful regeneration of dental pulp. The aim of the present review is to address the main characteristics of the different scaffolds, as well as their application in dentin-pulp complex regeneration. : A narrative review was conducted by two independent reviewers to answer the research question: What type of scaffolds can be used in dentin-pulp complex regeneration? An electronic search of PubMed, EMBASE and Cochrane library databases was undertaken. Keywords including "pulp-dentin regeneration scaffold" and "pulp-dentin complex regeneration" were used. To locate additional reports, reference mining of the identified papers was undertaken. : A wide variety of biomaterials is already available for tissue engineering and can be broadly categorized into two groups: (i) natural, and (ii) synthetic, scaffolds. Natural scaffolds often contain bioactive molecules, growth factors, and signaling cues that can positively influence cell behavior. These signaling molecules can promote specific cellular responses, such as cell proliferation and differentiation, crucial for effective tissue regeneration. Synthetic scaffolds offer flexibility in design and can be tailored to meet specific requirements, such as size, shape, and mechanical properties. Moreover, they can be functionalized with bioactive molecules, growth factors, or signaling cues to enhance their biological properties and the manufacturing process can be standardized, ensuring consistent quality for widespread clinical use. : There is still a lack of evidence to determine the optimal scaffold composition that meets the specific requirements and complexities needed for effectively promoting dental pulp tissue engineering and achieving successful clinical outcomes.
Topics: Humans; Tissue Scaffolds; Dentin; Tissue Engineering; Biocompatible Materials; Wound Healing; Intercellular Signaling Peptides and Proteins; Dental Pulp
PubMed: 38276040
DOI: 10.3390/medicina60010007 -
Journal of Biomechanics Aug 2022Investigations into teeth mechanical properties provide insight into physiological functions and pathological changes. This study sought to 1) quantify the spatial...
Investigations into teeth mechanical properties provide insight into physiological functions and pathological changes. This study sought to 1) quantify the spatial distribution of elastic modulus, hardness and the microstructural features of dog dentin and to 2) investigate quantitative relationships between the mechanical properties and the complex microstructure of dog dentin. Maxillary canine teeth of 10 mature dogs were sectioned in the transverse and vertical planes, then tested using nanoindentation and scanning electron microscopy (SEM). Microstructural features (dentin area fraction and dentinal tubule density) and mechanical properties (elastic modulus and hardness) were quantified. Results demonstrated significant anisotropy and spatial variation in elastic modulus, hardness, dentin area fraction and tubule density. These spatial variations adhered to a consistent distribution pattern; hardness, elastic modulus and dentin area fraction generally decreased from superficial to deep dentin and from crown tip to base; tubule density generally increased from superficial to deep dentin. Poor to moderate correlations between microstructural features and mechanical properties (R = 0.032-0.466) were determined. The results of this study suggest that the other constituents may contribute to the mechanical behavior of mammalian dentin. Our results also present several remaining opportunities for further investigation into the roles of organic components (e.g., collagen) and mineral content on dentin mechanical behavior.
Topics: Animals; Dentin; Dogs; Elastic Modulus; Hardness; Mammals; Microscopy, Electron, Scanning; Structure-Activity Relationship; Tooth
PubMed: 35834939
DOI: 10.1016/j.jbiomech.2022.111218 -
Odontology Apr 2021A loss of organs or the destruction of tissue leaves wounds to which organisms and living things react differently. Their response depends on the extent of damage, the... (Review)
Review
A loss of organs or the destruction of tissue leaves wounds to which organisms and living things react differently. Their response depends on the extent of damage, the functional impairment and the biological potential of the organism. Some can completely regenerate lost body parts or tissues, whereas others react by forming scars in the sense of a tissue repair. Overall, the regenerative capacities of the human body are limited and only a few tissues are fully restored when injured. Dental tissues may suffer severe damage due to various influences such as caries or trauma; however, dental care aims at preserving unharmed structures and, thus, the functionality of the teeth. The dentin-pulp complex, a vital compound tissue that is enclosed by enamel, holds many important functions and is particularly worth protecting. It reacts physiologically to deleterious impacts with an interplay of regenerative and reparative processes to ensure its functionality and facilitate healing. While there were initially no biological treatment options available for the irreversible destruction of dentin or pulp, many promising approaches for endodontic regeneration based on the principles of tissue engineering have been developed in recent years. This review describes the regenerative and reparative processes of the dentin-pulp complex as well as the morphological criteria of possible healing results. Furthermore, it summarizes the current knowledge on tissue engineering of dentin and pulp, and potential future developments in this thriving field.
Topics: Dental Pulp; Dentin; Humans; Regeneration; Tissue Engineering; Wound Healing
PubMed: 33263826
DOI: 10.1007/s10266-020-00573-1 -
IEEE Transactions on Ultrasonics,... Mar 2021Demineralization is a process of loss of minerals in the dental hard tissue that affects seriously the health of the patients, as it diminishes the tooth resistance,...
Demineralization is a process of loss of minerals in the dental hard tissue that affects seriously the health of the patients, as it diminishes the tooth resistance, generating chewing problems by altering the occlusal structure, hypersensitivity, and pulpal problems. Demineralization can be produced by pathological processes as erosion or caries, or by surgical processes as etching. Due to the complexity of natural demineralization processes, it is mandatory to provide quantitative and standardized tests to allow their study in controlled laboratory conditions. Ultrasonic techniques are suitable for this purpose as they are nondestructive, quick, and provide localized mechanical information about the tissue, which is related with its degree of demineralization. In the present work, we evaluate the complete process of demineralization of the human dentin under controlled laboratory conditions using a pulse-echo ultrasonic technique. Up to 15 human dentin teeth have been demineralized with phosphoric acid at 10%. The time-of-flight measurements using the pulse-echo system allows to obtain the speed of sound in healthy (3415 m/s) and demineralized dentin tissue (1710 m/s), as well as to characterize the dynamical process of the acid penetration, which generates well-defined boundaries between two media (demineralized and mineralized dentin), showing very different mechanical properties. These boundaries advance in depth at an initial rate of [Formula: see text]/min, decelerating at -9.3 nm/min until the whole demineralization of the sample is achieved. In addition, the technique allows to measure the relevance of the demineralization produced by the acid residues inside the tooth once it has been removed from the acidic solution. Beyond the assessment of artificial demineralization lesions under laboratory conditions, as demonstrated in this article, the proposed technique opens new approaches to the assessment of demineralization caused by natural caries in vivo.
Topics: Dentin; Humans; Tooth Demineralization; Ultrasonics
PubMed: 32776879
DOI: 10.1109/TUFFC.2020.3015668 -
International Journal of Molecular... May 2024It is remarkable how teeth maintain their healthy condition under exceptionally high levels of mechanical loading. This suggests the presence of inherent mechanical... (Review)
Review
It is remarkable how teeth maintain their healthy condition under exceptionally high levels of mechanical loading. This suggests the presence of inherent mechanical adaptation mechanisms within their structure to counter constant stress. Dentin, situated between enamel and pulp, plays a crucial role in mechanically supporting tooth function. Its intermediate stiffness and viscoelastic properties, attributed to its mineralized, nanofibrous extracellular matrix, provide flexibility, strength, and rigidity, enabling it to withstand mechanical loading without fracturing. Moreover, dentin's unique architectural features, such as odontoblast processes within dentinal tubules and spatial compartmentalization between odontoblasts in dentin and sensory neurons in pulp, contribute to a distinctive sensory perception of external stimuli while acting as a defensive barrier for the dentin-pulp complex. Since dentin's architecture governs its functions in nociception and repair in response to mechanical stimuli, understanding dentin mechanobiology is crucial for developing treatments for pain management in dentin-associated diseases and dentin-pulp regeneration. This review discusses how dentin's physical features regulate mechano-sensing, focusing on mechano-sensitive ion channels. Additionally, we explore advanced in vitro platforms that mimic dentin's physical features, providing deeper insights into fundamental mechanobiological phenomena and laying the groundwork for effective mechano-therapeutic strategies for dentinal diseases.
Topics: Dentin; Humans; Animals; Odontoblasts; Mechanotransduction, Cellular; Biomechanical Phenomena; Dental Pulp; Extracellular Matrix
PubMed: 38891829
DOI: 10.3390/ijms25115642 -
Journal of Oral Biosciences Mar 2020The Bone Morphogenetic Proteins (BMPs) direct tooth development and still express in the adult tooth. We hypothesized that inhibition of BMP function would therefore...
OBJECTIVES
The Bone Morphogenetic Proteins (BMPs) direct tooth development and still express in the adult tooth. We hypothesized that inhibition of BMP function would therefore disrupt dentinogenesis by differentiated odontoblasts.
METHODS
We generated mice overexpressing the BMP-inhibitory protein Noggin in differentiated odontoblasts and osteocytes under control of a Dmp1 promoter-driven cre transgene. We compared the dentin phenotype in these mice with that in WT littermates and in mice with a Smad4 odontoblast/osteocyte knockout mediated by the same cre and therefore lacking all BMP and Tgfβ signaling in the same tissues.
RESULTS
Three-month-old first molars from both Noggin-expressing and Smad4-deleted mice showed decreased dentin volume with enlarged pulp cavities, and both displayed less organized and mineralized dentinal tubules compared to WT. The Smad4-ablated phenotype was more severe. While dentin sialophosphoprotein (DSPP) and bone sialoprotein (BSP) were decreased in the dentin of both lines, dentin matrix protein 1 (DMP1) was sharply increased in Noggin-expressing teeth.
CONCLUSIONS
The phenotypes we observed in Noggin-overexpressing and Smad4-conditional knockout teeth resemble the phenotype of Dentinogenesis Imperfecta (DGI) type III. Our results show that BMPs regulate post-natal dentinogenesis and that BMP-inhibitory proteins like Noggin play a role in that regulation. The increased severity of the Smad4 phenotype indicates that Tgfβ ligands, in addition to BMPs, play a crucial role in post-developmental dentinogenesis.
Topics: Animals; Carrier Proteins; Dentin; Dentinogenesis; Extracellular Matrix Proteins; Mice; Phosphoproteins; Sialoglycoproteins
PubMed: 31862386
DOI: 10.1016/j.job.2019.11.001 -
The Chinese Journal of Dental Research Dec 2023Dentine is a major component of teeth and is responsible for many of their functions, such as mastication and neural sensation/transduction. Over the past decades,... (Review)
Review
Dentine is a major component of teeth and is responsible for many of their functions, such as mastication and neural sensation/transduction. Over the past decades, numerous studies have focused on dentine development and regeneration using a variety of research models, including in vivo, ex vivo and in vitro models. In vivo animal models play a crucial role in the exploration of biochemical factors that are involved in dentine development, whereas ex vivo and in vitro models contribute mainly to the identification of biophysical factors in dentine regeneration, of which mechanical force is most critical. In the present review, research models involved in studies related to dentine development and regeneration were screened from publications released in recent years and summarised comprehensively, particularly in vivo animal models including prokaryotic microinjection, Cre/LoxP, CRISPR/Cas9, ZFN and TALEN, and scaffold-based in vitro and ex vivo models. The latter were further divided by the interactive forces. Summarising these research models will not only benefit the development of future dentine-related studies but also provide hints regarding the evolution of novel dentine regeneration strategies.
Topics: Animals; Dentin; Tooth; Regeneration
PubMed: 38126366
DOI: 10.3290/j.cjdr.b4784033