-
Brazilian Dental Journal 2023Considering the side effects in the oral cavity and dental structures of radiotherapy (RDT) for head and neck cancer, this study aimed to evaluate the effects of RDT on... (Randomized Controlled Trial)
Randomized Controlled Trial
Considering the side effects in the oral cavity and dental structures of radiotherapy (RDT) for head and neck cancer, this study aimed to evaluate the effects of RDT on the root dentin concerning the obliteration of dentinal tubules, the inorganic composition of intra-radicular dentin, and the integrity of collagen fibers. Thirty human canines were selected from a biobank and randomly divided into two groups (n=15). The samples were sectioned buccolingually, and a hemisection was used for structural analysis by scanning electron microscopy (SEM) and energy-dispersive X-ray spectrometer (EDS). Low-vacuum SEM images were obtained at 2000-x magnification to observe the obliteration of the dentinal tubules. Moreover, compositional evaluation was performed using EDS. After RDT, the SEM and EDS analyses were repeated using the same methodology. RDT was applied fractionally at 2 Gy per day, 5 days per week, for 7 weeks, resulting in a total dose of 70 Gy. The collagen integrity of the irradiated and non-irradiated samples was analyzed using Masson's trichrome and picrosirius red staining polarization microscopy. Samples subjected to RDT exhibited dentinal tubule obliteration (p < 0.001); low integrity of type I and III collagen fibers (p < 0.05); compositional reduction of calcium (p = 0.012), phosphorus (p = 0.001), and magnesium (p < 0.001); an increased Ca/P ratio (p < 0.001). RDT affects the structure of dentinal tubules, the inorganic composition of intra-radicular dentin, and the collagen fiber integrity in the root dentin, which may interfere with the effectiveness and durability of dental procedures.
Topics: Humans; Calcium; Collagen; Dentin; Microscopy, Electron, Scanning; Phosphorus; Tooth Root
PubMed: 36888844
DOI: 10.1590/0103-6440202305101 -
Anatomical Record (Hoboken, N.J. : 2007) Dec 2021Tooth plates are a unique dental organ found in holocephalan fishes and lungfish. The chimaeroid tooth plates are atypical in terms of biomineralization, due to the hard...
Tooth plates are a unique dental organ found in holocephalan fishes and lungfish. The chimaeroid tooth plates are atypical in terms of biomineralization, due to the hard tissue composition of whitlockite and apatite, while those of lungfish and other vertebrates are composed of apatite. The tooth plates are overlaid by a thin veneer-outer dentin-whose composition and role are not known. We aimed to test whether the outer dentin is composed of whitlockite or apatite, and whether it protects the osteodentin from abrasion and supports its overall strength. For this purpose, the mineral components and microstructure of outer dentin were studied. Our analyses of the outer dentin from the anterior (vomerine) tooth plates of Chimaera phantasma revealed that the mineral component is magnesium- and carbonate-containing calcium-deficient apatite and that the outer dentin has a three-zone structure. The main body is sandwiched between thin zones, which are less mineralized than the main body. Furthermore, in the outer zone and the main body, a higher-order structure was formed in accordance with the organization of wide and narrow fibers. Mineralization made the main body a composite of bundles of fibers and apatite. Transmission electron microscopy showed a structural relationship between apatite and the fibrous component on which the apatite was formed. Such a structure of the main body could be highly effective as a framework to resist abrasion and support the overall strength of the tooth plate.
Topics: Animals; Apatites; Dentin; Fishes; Minerals; Tooth
PubMed: 33620142
DOI: 10.1002/ar.24606 -
Nigerian Journal of Clinical Practice Mar 2022This study evaluated the effect of C-factor on the bond strength of a resin composite to floor and wall dentin using various adhesive systems.
AIMS AND BACKGROUND
This study evaluated the effect of C-factor on the bond strength of a resin composite to floor and wall dentin using various adhesive systems.
MATERIALS AND METHODS
Four dentin substrates (flat wall, flat floor, cavity wall, or cavity floor) were prepared on human molars. Each specimen was restored with one of three adhesives; Clearfil SE Bond, Single Bond, or Clearfil tri-S Bond followed by buildup or filling using Z100 resin composite. The specimen was cut perpendicular to the bonded surface parallel to the floor or wall to obtain beams after light curing at 24,000 mJ/cm. The microtensile bond strength to wall specimens or the cavity floor was determined. Data were analyzed.
RESULTS
All adhesive systems exhibited the highest bond strength to flat wall group (p < 0.05). The bond strength to the cavity group was significantly lower than that to the respective flat group regardless of the bonding system (p < 0.05). There was no significant difference in bond strength with Clearfil SE Bond and Clearfil tri-S Bond between the cavity wall and cavity floor (p > 0.05).
CONCLUSION
The findings suggested that the strength of bonding to the cavity floor and cavity wall was affected by C-factor regardless of the adhesive system. Bonding to flat wall was higher than flat floor regardless of the adhesive system. Self-etching system provided uniform bond to the cavity wall and cavity floor dentin. However, total etching system reduced bond to the cavity floor than to the cavity wall.
Topics: Adhesives; Dentin; Dentin-Bonding Agents; Humans; Materials Testing; Tensile Strength
PubMed: 35295045
DOI: 10.4103/njcp.njcp_1364_21 -
Dental Materials Journal Oct 2022The aim of this study was to evaluate the maximum amount of chlorhexidine (CHX) that could be incorporated to self-adhesive resin cements to add antibacterial effect...
The aim of this study was to evaluate the maximum amount of chlorhexidine (CHX) that could be incorporated to self-adhesive resin cements to add antibacterial effect without affecting the physical properties. The CHX was incorporated into a commercial self-adhesive resin cement at mass fractions of 0.5-15 wt%, and the CHX-release profile, antibacterial effect, flexural and bond strengths of experimental cements were evaluated. Increasing the CHX content from 5 to 15 wt% resulted in a higher released concentration of CHX. In agar diffusion tests, experimental cements containing 5, 10, and 15 wt% CHX produced inhibition zones against oral bacteria. In flexural strength and shear bond strength to dentin, no significant reduction was observed with the incorporation of 5 wt% CHX. This in vitro study suggests that the addition of 5 wt% CHX yielded an antibacterial self-adhesive cement and had no adverse effect on the flexural and shear bond strengths.
Topics: Agar; Anti-Bacterial Agents; Chlorhexidine; Dental Bonding; Dental Cements; Dentin; Materials Testing; Resin Cements
PubMed: 35584938
DOI: 10.4012/dmj.2022-004 -
Brazilian Dental Journal 2024This study aimed to evaluate the antimicrobial activity of calcium hypochlorite (Ca (OCl)2) and sodium hypochlorite (NaOCl) using confocal laser scanning microscopy...
This study aimed to evaluate the antimicrobial activity of calcium hypochlorite (Ca (OCl)2) and sodium hypochlorite (NaOCl) using confocal laser scanning microscopy (CLSM) and dentin organic matrix alteration by picrosirius staining and light microscopy (LM). Samples of human extracted teeth were infected with Enterococcus faecalis by centrifugation of the bacterial suspension and were treated with Ca(OCl)2 or NaOCl at 0.5%, 2.5%, and 6% for 15, 30, and 60 seconds. CLSM and viability staining were used to quantitatively analyze the proportions of dead/live bacteria in the canal lumen and border of the root canal. The data were analyzed by ANOVA and Fisher test. For LM analysis, one hundred bovine teeth were randomly divided into 10 test groups (n=10): G1- Without treatment; G2- 17% EDTA; G3- 6% NaOCl; G4- 6% NaOCl + EDTA; G5- 0.5% Ca(OCl)2; G6- 0.5% Ca(OCl)2 + EDTA; G7- 2.5% Ca(OCl)2; G8- 2.5% Ca(OCl)2 + EDTA; G9- 6% Ca(OCl)2; G10- 6% Ca(OCl)2 + EDTA. The samples were fragmented and stained with Picrosirius. Data were analyzed by Kruskal-Wallis and Dunn (P<0.05). There was a strong correlation between the results of the canal lumen and the border of the root canal (r=0.962). Both hypochlorites at a concentration of 0.5% showed less microbial reduction compared to 2.5% and 6% (P<0.05). There was less antimicrobial activity at 15 seconds compared to 30 and 60 seconds (P<0.05). Ca(OCl)2 and NaOCl showed similar results at the same concentrations (P>0.05). In conclusion, Ca(OCl)2 caused fewer alterations to the dentin organic matrix at concentrations of 0.5% and 2.5%. Ca(OCl)2 presents antimicrobial activity similar to NaOCl, and collagen damage is concentration-dependent.
Topics: Sodium Hypochlorite; Dentin; Calcium Compounds; Enterococcus faecalis; Collagen; Humans; Anti-Infective Agents; Root Canal Irrigants; Cattle; Microscopy, Confocal; Animals; Dental Pulp Cavity; In Vitro Techniques
PubMed: 38922251
DOI: 10.1590/0103-6440202405771 -
European Cells & Materials Nov 2021Matrix metalloproteinases (MMPs) have been implicated not only in the regulation of developmental processes but also in the release of biologically active molecules and... (Review)
Review
Matrix metalloproteinases (MMPs) have been implicated not only in the regulation of developmental processes but also in the release of biologically active molecules and in the modulation of repair during tertiary dentine formation. Although efforts to preserve dentine have focused on inhibiting the activity of these proteases, their function is much more complex and necessary for dentine repair than expected. The present review explores the role of MMPs as bioactive components of the dentine matrix involved in dentine formation, repair and regeneration. Special consideration is given to the mechanical properties of dentine, including those of reactionary and reparative dentine, and the known roles of MMPs in their formation. MMPs are critical components of the dentine matrix and should be considered as important candidates in dentine regeneration.
Topics: Dentin; Dentin, Secondary; Humans; Matrix Metalloproteinases
PubMed: 34818431
DOI: 10.22203/eCM.v042a24 -
Brazilian Dental Journal 2022Proanthocyanidin (PA) is a promising dentin biomodifier due to its ability to stabilize collagen fibrils against degradation by matrix metalloproteinases (MMPs);...
Proanthocyanidin (PA) is a promising dentin biomodifier due to its ability to stabilize collagen fibrils against degradation by matrix metalloproteinases (MMPs); however, the most effective protocol to incorporate PA into bonding procedures is still unclear. This study evaluated the effect of dentin biomodification with a PA acid etchant on MMP activity, adhesive interface morphology and resin-dentin microtensile bond strength. Sound extracted human molars were flattened to expose dentin and acid-etched for 15 s according to the groups: EXP - experimental phosphoric acid; EXP+PA - experimental phosphoric acid 10% PA; TE - total-etching system; SE - self-etching system. Samples were restored with composite resin and stored in distilled water (37ºC). MMP activity and interface morphology were analyzed after 24 h by in situ zymography (n=6) and scanning electron microscopy (n=3), respectively. The resin-dentin microtensile bond strength (μTBS) was evaluated after 24 h and 6 months storage (n=6). Significantly higher MMP activity was detected in etched dentin compared with untreated dentin (p<0.05), but no difference among acid groups was found. Resin tags and microtags, indicative of proper adhesive system penetration in dentinal tubules and microtubules, were observed along the hybrid layer in all groups. There was no difference in μTBS between 24 h and 6 months for EXP+PA; moreover, it showed higher long-term μTBS compared with TE and EXP (p<0.05). The results suggest that 15 s of biomodification was not sufficient to significantly reduce MMP activity; nonetheless, EXP+PA was still able to improve resin-dentin bond stability compared with total- and self-etching commercial systems.
Topics: Acid Etching, Dental; Composite Resins; Dental Bonding; Dental Cements; Dentin; Dentin-Bonding Agents; Humans; Materials Testing; Microscopy, Electron, Scanning; Phosphoric Acids; Proanthocyanidins; Resin Cements; Tensile Strength
PubMed: 36043570
DOI: 10.1590/0103-6440202203941 -
Journal of Dentistry Mar 2023Bioactive materials have been used for functionalization of adhesives to promote dentin remineralization. This study aims to evaluate bonding ability and both mechanical...
OBJECTIVES
Bioactive materials have been used for functionalization of adhesives to promote dentin remineralization. This study aims to evaluate bonding ability and both mechanical and chemical behavior of demineralized dentin infiltrated with polymeric nanoparticles doped with dexamethasone (Dex-NPs).
METHODS
Dentin conditioned surfaces were infiltrated with NPs, Dex-NPs or Dex-Zn-NPs. Bonded interfaces were also created and stored for 24 h or 21d, and then submitted to microtensile bond strength testing. Dentin remineralization was analyzed by Nanohardness, Young's modulus and Raman analysis.
RESULTS
At 21d of storage, dentin treated with undoped-NPs attained the lowest nanohardness and Young's modulus. Dex-NPs and Zn-Dex-NPs increased dentin nanohardness and Young's modulus after 21d Raman analysis showed high remineralization, crystallinity, crosslinking and better structure of collagen when functionalized Dex-NPs were present at the dentin interface.
CONCLUSIONS
Infiltration of dentin with Dex-NPs promoted functional remineralization as proved by nanomechanical and morpho-chemical evaluation tests. Dexamethasone in dentin facilitated crystallographic maturity, crystallinity and improved maturity and secondary structure of dentin collagen.
CLINICAL SIGNIFICANCE
Using dexamethasone-functionalized NPs before resin infiltration is a clear option to obtain dentin remineralization, as these NPs produce the reinforcement of the dentin structure, which will lead to the improvement of the longevity of resin restorations.
Topics: Humans; Dental Cements; Nanoparticles; Collagen; Dentin; Tensile Strength; Dexamethasone; Materials Testing; Dentin-Bonding Agents; Resin Cements; Dental Bonding
PubMed: 36754111
DOI: 10.1016/j.jdent.2023.104447 -
Frontiers in Cellular and Infection... 2023The presence of host collagenases in the degradation of the protein matrix at later stages of carious dentin lesions development, as well as the potential involvement of... (Review)
Review
INTRODUCTION AND AIM
The presence of host collagenases in the degradation of the protein matrix at later stages of carious dentin lesions development, as well as the potential involvement of bacterial collagenases, have been suggested but lack conclusive evidence. This study aims to conduct a systematic review to comprehensively assess the profile of host and bacterial-derived collagenolytic proteases in both root and coronal dentin carious lesions.
METHODS
The search was performed in eight databases and the grey literature. Studies evaluating dentin, extracted teeth, or biofilms from natural caries lesions were included. The methodological quality of studies was assessed using the Joanna Briggs Institute tool. Synthesis of the results and the certainty of evidence were performed following the Synthesis without Meta-analysis (SWiM) checklist and GRADE approach for narrative synthesis, respectively.
RESULTS
From 935 recovered articles, 18 were included. Although the evidence was very uncertain, it was possible to suggest that 1) MMP-2, MMP-9, MMP-13, and CT-B may be increased in carious dentin when compared to sound dentin; 2) there is no difference in MMP-2 presence, while MMP-13 may be increased in root when compared to coronal carious dentin; 3) there is no difference of MMP-2 and MMP-9 expression/activity before and after cavity sealing; 4) MMP-8 may be increased in the dentin before cavity sealing compared to dentin after cavity sealing; 5) there is no difference of MMP-20 in irradiated vs. non-irradiated carious dentin. MMP-20 probably reduces in carious outer dentin when compared to carious inner dentin (moderate certainty). Genes encoding bacterial collagenolytic proteases and protein-degrading bacteria were detected in coronal and root carious lesions.
CONCLUSION
Trends in the direction of the effect were observed for some collagenolytic proteases in carious dentin, which may represent a potential target for the development of new treatments. (Protocol register-PROSPERO: CRD42020213141).
Topics: Humans; Matrix Metalloproteinase 2; Matrix Metalloproteinase 9; Dentin; Matrix Metalloproteinase 13; Peptide Hydrolases; Matrix Metalloproteinase 20; Collagenases; Bacteria; Dental Caries
PubMed: 38029242
DOI: 10.3389/fcimb.2023.1278754 -
Dental Materials : Official Publication... May 2022To assess dentin collagen denaturation from phosphoric acid and enzyme treatments using collagen hybridizing peptide (CHP) and to investigate the effect of collagen...
OBJECTIVE
To assess dentin collagen denaturation from phosphoric acid and enzyme treatments using collagen hybridizing peptide (CHP) and to investigate the effect of collagen denaturation on bio-stabilization promoted by proanthocyanidins (PA).
METHODS
Human molars were sectioned into 7-µm-thick dentin films, demineralized, and assigned to six groups: control with/without PA modification, HPO-treated collagen with/without PA modification, enzyme-treated collagen with/without PA modification. PA modification involved immersing collagen films in 0.65% PA for 30 s. HPO and enzyme treatments were used to experimentally induce collagen denaturation, which was quantitated by fluorescence intensity (FI) from the fluorescently-conjugated-CHP (F-CHP) staining (n = 4). FTIR was used to characterize collagen structures. All groups were subject to collagenase digestion to test the bio-stabilization effect of PA on denatured collagen using weight loss analysis and hydroxyproline assay (n = 6). Data were analyzed using two-factor ANOVA and Games-Howell post hoc tests (α = 0.05).
RESULTS
FTIR showed collagen secondary structural changes after denaturation treatments and confirmed the incorporation and cross-linking of PA in control and treated collagen. F-CHP staining indicated high-degree, medium-degree, and low-degree collagen denaturation from HPO-treatment (FI = 83.22), enzyme-treatment (FI = 36.54), and control (FI = 6.01) respectively. PA modification significantly reduced the weight loss and hydroxyproline release of all groups after digestion (p < 0.0001), with the results correlated with FI values at r = 0.96-0.98.
SIGNIFICANCE
A molecular method CHP is introduced as a sensitive technique to quantitate dentin collagen denaturation for the first time. PA modification is shown to effectively stabilize denatured collagen against collagenase digestion, with the stabilization effect negatively associated with the collagen denaturation degree.
Topics: Collagen; Collagenases; Dentin; Humans; Hydroxyproline; Peptides; Proanthocyanidins; Weight Loss
PubMed: 35431088
DOI: 10.1016/j.dental.2022.04.020