-
Brazilian Oral Research 2024This study aimed to evaluate the influence of the Er,Cr:YSGG irradiation and 980-nm diode lasers on the surface roughness (SR) and volume loss (VL) of dentin subjected...
This study aimed to evaluate the influence of the Er,Cr:YSGG irradiation and 980-nm diode lasers on the surface roughness (SR) and volume loss (VL) of dentin subjected to cariogenic challenge. Subsequently, 130 specimens of bovine dentin were divided into the following 13 groups: NT: no treatment; FG: fluoride gel; FV: fluoride varnish; Di: 980-nm diode; Di + FG; Di + FV; FG + D; FV + Di; Er: Er,Cr:YSGG; Er + FG; Er + FV; FG + Er and FV + Er. Er,Cr:YSGG laser parameters were as follows: 0.25 W; 5.0 Hz; 4.46 J/cm2 without water and 55% air. Furthermore, the 980-nm diode laser parameters were 2.0 W; 2.0 Hz; 21.41 J/cm2. The samples from each group were subjected to pH cycling. A confocal laser scanning microscope was used to evaluate SR and VL. Difference between the volume of the reference and treated areas + DES/RE was used to determine SR and VL. The mean values of the different groups were subjected to analysis of variance and Tukey's post-hoc test. The VL values were analyzed using the Kruskal-Wallis and Dunn post-hoc test (p < 0.05). The SR of the reference area did not show a statistically significant 1807-3107-bor-38-e025treatment and cariogenic challenge (p > 0.05). Moreover, VL in the FV + Di and FV + Er groups showed a statistically significant difference compared with areas submitted to different types of treatment and cariogenic challenge (p > 0.05). Er,Cr:YSGG and 980-nm diode lasers associated with fluoride varnishes decreased dentin VL in bovine teeth submitted to cariogenic challenge.
Topics: Cattle; Animals; Lasers, Semiconductor; Dentin; Lasers, Solid-State; Microscopy, Confocal; Surface Properties; Reproducibility of Results; Dental Caries; Analysis of Variance; Reference Values; Fluorides, Topical; Cariostatic Agents; Time Factors; Hydrogen-Ion Concentration
PubMed: 38922205
DOI: 10.1590/1807-3107bor-2024.vol38.0045 -
Journal of Functional Biomaterials Jun 2024Over the last decades, a variety of biomaterials, ranging from synthetic products to autologous and heterologous grafts, have been recommended to conserve and regenerate...
Over the last decades, a variety of biomaterials, ranging from synthetic products to autologous and heterologous grafts, have been recommended to conserve and regenerate bone tissue after tooth extraction. We conducted a biochemical study on ground extracted teeth that aimed to evaluate the osteoinductive and osteoconductive potential of dentin by assessing the releases of bone morphogenetic protein (BMP-2), osteocalcin (OC) and osteonectin (ON) over time (24 h, 10 days and 28 days). Twenty-six patients, who required the extraction of nonrestorable teeth, were enrolled in the study according to the inclusion criteria, as follows: thirteen young patients 18 to 49 years of age (UNDER 50), and thirteen patients of 50 to 70 years (OVER 50); a total of twenty-six teeth were extracted, ground and analyzed by enzyme-linked immunosorbent assays (ELISA). All ground teeth released BMP-2, OC and ON at each time point; no differences were observed between the UNDER-50 and OVER-50 patients. The results of the study support the use of autologous dentin as osteoinductive material for bone regeneration procedures, irrespective of patients' ages.
PubMed: 38921535
DOI: 10.3390/jfb15060162 -
Journal of Functional Biomaterials May 2024Effective root canal disinfection and the subsequent release of natural growth factors from dentin are crucial to the success of regenerative endodontic procedures. This...
Effective root canal disinfection and the subsequent release of natural growth factors from dentin are crucial to the success of regenerative endodontic procedures. This study evaluated the effect of newly introduced calcium silicate-based temporary intracanal medicament Bio-C Temp and calcium hydroxide-based material UltraCal XS on the release of transforming growth factor β1 (TGF-β1) from root canal dentin. Twenty-two intact and fully developed human premolars from patients aged 15-18 were shaped and irrigated according to the current clinical recommendations. The teeth were then gently split in half, and the root canal dentin of paired samples was covered with Bio-C Temp or UltraCal XS. After 3 weeks of incubation, the specimens were conditioned with 17% EDTA and the collected solution was subjected to the quantification of the released TGF-β1 by performing an ELISA. One-way analysis of variance (ANOVA), followed by Tukey's test, was selected to determine the statistically significant differences between the groups at the 0.95 confidence level. The highest mean value of released TGF-β1 (1993.1 pg/mL) was detected in the control group, where the root canal dentin was conditioned with 17% EDTA alone. Regarding the experimental groups, Bio-C Temp released a statistically significantly higher amount of TGF-β1 (282.14 pg/mL) compared to UltraCal XS (114.28 pg/mL; = 0.0158). Bio-C Temp affected the release of growth factors from root canal dentin less than UltraCal XS and may therefore serve as an intracanal medicament for regenerative endodontic procedures.
PubMed: 38921513
DOI: 10.3390/jfb15060139 -
Dentistry Journal Jun 2024Dentin hypersensitivity (DH) is a common challenge in pediatric patients with molar incisor hypomineralization (MIH), stemming from enamel porosity or exposed dentin...
Dentin hypersensitivity (DH) is a common challenge in pediatric patients with molar incisor hypomineralization (MIH), stemming from enamel porosity or exposed dentin after enamel breakdown. This three-arm randomized controlled clinical trial aims to evaluate the effectiveness of three different desensitizing treatment protocols. The study was conducted on 39 children, aged 6-14 years old, with MIH and DH. Group A received casein phosphopeptide plus amorphous calcium phosphate fluoride (CPP-ACPF) mousse and sham light therapy, Group B received placebo mousse and photo-bio-modulation therapy (PMBT), and Group C received both CPP-ACPF mousse and PMBT. DH evaluation using a visual analogue scale was performed at multiple time points. Both CPP-ACPF mousse and PMBT individually demonstrated desensitizing effects on dental elements affected by MIH. While PMBT had a greater immediate effect, the combination of the two therapies proved most effective in reducing DH. The VAS scores were statistically lower in group C compared to groups A and B, both after the first session ( = 0.0001) and after 28 days ( = 0.0005). This study suggests promising avenues for managing DH in MIH patients, highlighting the potential of combined therapies, specifically CPP-ACPF mousse and PMBT, for enhanced clinical outcomes.
PubMed: 38920887
DOI: 10.3390/dj12060186 -
Dentistry Journal Jun 2024In pediatric and operative dentistry, caries treatment benefits from a therapeutic option based on the use of silver fluoride (AgF) associated with potassium iodide (KI)...
In pediatric and operative dentistry, caries treatment benefits from a therapeutic option based on the use of silver fluoride (AgF) associated with potassium iodide (KI) to avoid dark colorations on dental tissues. The objective of this in vitro study is to evaluate the retention of glass ionomer cement (GIC) on a dentin when treated with AgF and KI. Twenty-two healthy human permanent molars and eight human primary teeth, all free of any decay, were cut to obtain occlusal flat dentinal surfaces and were then treated with AgF for a duration of 60 s. For half of the teeth, a drop of KI was applied for a duration of 30 s. All samples were covered with a plot of GIC and their resistance to shear bond strength was measured. The fracture resistance in both permanent and primary teeth does not show any statistically significant differences whether KI was applied or not. For permanent teeth, the resistance is slightly higher in the group treated with KI than in the group treated with AgF alone. To our knowledge, these data are the first to describe the possible application of KI both on primary and permanent teeth. In any case, further studies are needed to investigate the bond strength between dentin and GIC on a wider range of samples.
PubMed: 38920878
DOI: 10.3390/dj12060177 -
Dentistry Journal Jun 2024(1) Background: Pulp canal obliteration (PCO) is a common condition characterized by an abnormal dentinal apposition within the canal wall, which often rises as a...
(1) Background: Pulp canal obliteration (PCO) is a common condition characterized by an abnormal dentinal apposition within the canal wall, which often rises as a consequence of dental trauma. In recent years, "guided endodontics" has offered a reliable and safer procedure for endodontic access in case of PCO. The present case report aims to introduce a new endodontic guided system with a sleeveless, open-frame titanium guide designed to reduce costs compared to traditional templates. (2) Methods: The patient is a 19-year-old female who was referred to a private clinic to treat a calcified and symptomatic tooth (3.3) with apical periodontitis. Following the first unsuccessful treatment attempt using the operating microscope, a three-dimensional cone beam computed tomography (CBCT) examination and an optical impression were performed in agreement with the patient. The Digital Imaging and Communications in Medicine (DICOM) and Standard Tessellation Language (STL) files were sent to the lab for the template packaging, and the patient was scheduled for a second appointment. The endodontic guide was accurately positioned, and shaping and filling were concluded with success. The canal was sealed with the single-cone technique and bioceramic sealer. (3) Results: The patient reported no significant post-operative symptoms. Notably, the treatment achieved total symptom resolution, as evidenced by radiographic assessments conducted 3 and 24 months post-treatment, confirming the procedure's success. (4) Conclusions: This innovative sleeveless, open-frame static titanium guide presents a promising advancement in guided endodontics for PCO treatment. The advantages include preserving healthy dental tissue, reduced chairside operating time, and cost savings compared to conventional templates. This approach holds promise for enhancing the quality and efficiency of endodontic procedures in cases of PCO. While the static guide holds promise, larger prospective studies are necessary to validate its efficacy, safety, and broader applicability in routine endodontic procedures.
PubMed: 38920867
DOI: 10.3390/dj12060166 -
Dentistry Journal May 2024Modern conservative dentistry is taking the lead in daily clinical practice and is relying on adhesion. Whether it is a simple composite, ceramic inlays, onlays, veneers...
Modern conservative dentistry is taking the lead in daily clinical practice and is relying on adhesion. Whether it is a simple composite, ceramic inlays, onlays, veneers or crowns, the common factor for a successful outcome is a good bonding of these elements to dental structures. Thus, the purpose of this study was to evaluate the bond strength of resin composite to dentin when using a new device, the DENTIPURE KM™ (KM, Beirut, Lebanon), which provides a pure air flow, free of any contaminants and without humidity, when compared to other dental equipment. One hundred and eighty extracted human molars were equally divided into three groups according to the device used, the DENTIPURE KM™ (KM, Beirut, Lebanon), the KAVO™ (ESTETICA E30/E70/E80 Vision, KAVO, Biberach, Germany), or the ADEC™ (A-dec Performer 200, Newberg, OR, USA). The shear bond strength (SBS) was evaluated after 24 h of storage in distilled water on a universal testing machine. Statistical analysis was set with a level of significance at ≤ 0.05. The results revealed that significantly different bond strength was imparted by the DENTIPURE KM™ device and the ADEC™ dental unit ( = 0.042). In conclusion, while the DENTIPURE KM™ device shows promise in providing contaminant-free air during bonding, its impact on dentin bond strength compared to devices like the KAVO™ appears minimal. Further research is needed to fully assess its potential in enhancing dentinal adhesion procedures.
PubMed: 38920861
DOI: 10.3390/dj12060160 -
Frontiers in Dentistry 2024Teeth bleaching is an accepted and modern treatment in cosmetic dentistry. Bleaching agents may affect amalgam restorations and increase mercury release; therefore,...
Teeth bleaching is an accepted and modern treatment in cosmetic dentistry. Bleaching agents may affect amalgam restorations and increase mercury release; therefore, patients are at increased risk of mercury exposure in the body. The aim of this study was to investigate the effect of polishing and universal bonding application on mercury release from aged amalgams exposed to bleaching. In this in-vitro experimental study, 64 dental amalgam specimens with dimensions of 3×5×10 were prepared and divided into two experimental and control groups. Each group was further divided into 4 subgroups and received one of the following treatments: no intervention, surface bonding, polishing, or polishing and surface bonding. Subsequently, the samples were immersed in bleaching agent containing 7% hydrogen peroxide and the amount of mercury released after 96h was measured. The results were analyzed by two-way ANOVA and Tukey post hoc tests (α≤0.05). The results showed that the type of solution (P<0.05) and surface treatment (P<0.001) significantly affected the level of mercury release. However, there was no significant interaction between surface treatment methods in the bleaching group and those in the phosphate buffer group (P=0.621). Bleaching agents were found to enhance mercury release from dental amalgam. The application of polishing and universal bonding on amalgam surfaces exhibited significant effects on the reduction of the mercury release
PubMed: 38919769
DOI: 10.18502/fid.v21i14.15392 -
Frontiers in Dentistry 2024This study assessed the effect of chlorhexidine (CHX) and isopropyl alcohol (IA) on immediate and late pushout bond strength (PBS) of fiber posts to dentin. In this in...
This study assessed the effect of chlorhexidine (CHX) and isopropyl alcohol (IA) on immediate and late pushout bond strength (PBS) of fiber posts to dentin. In this in vitro study, 54 single-canal premolars were endodontically treated, and randomly assigned to 3 groups (N=18) for root dentin conditioning with distilled water (control), 2% CHX, and 70% IA after post space preparation. Fiber posts were cemented with TheraCem self-adhesive cement, and each group was subdivided into two subgroups (N=9) for PBS measurement immediately after bonding, and after 5000 thermal cycles (5-55°C). The roots were then sectioned, and their PBS was measured. The mode of failure was evaluated under a stereomicroscope at ×40 magnification. Data were analyzed by repeated measures ANOVA and Tukey's test (alpha=0.05). The highest PBS was noted in the IA group (21.12 MPa) after 24 hours and the lowest PBS belonged to the control group after thermocycling (7.48 MPa). The immediate and post-thermocycling PBS were significantly lower in the control group than the CHX group (P<0.05). The PBS in both the control and CHX groups was lower than that in the IA group (P<0.001). Regardless of the type of detergent, a significant reduction in PBS was observed after thermocycling (P<0.003). The PBS significantly decreased from the cervical towards the apical region in all groups (P<0.001). According to the results, application of IA before the self-adhesive cement effectively improved the immediate and late PBS, and was significantly more effective than CHX
PubMed: 38919768
DOI: 10.18502/fid.v21i13.15374 -
Life Sciences Jun 2024Caries and pulpitis remain a major global disease burden and affect the quality of life of patients. Odontoblasts are key players in the progression of caries and... (Review)
Review
Caries and pulpitis remain a major global disease burden and affect the quality of life of patients. Odontoblasts are key players in the progression of caries and pulpitis, not only secreting and mineralizing to form dentin, but also acting as a wall of defense to initiate immune defenses. Mitochondrion is an information processor for numerous cellular activities, and dysregulation of mitochondrion homeostasis not only affects cellular metabolism but also triggers a wide range of diseases. Elucidating mitochondrial homeostasis in odontoblasts can help deepen scholars' understanding of odontoblast-associated diseases. Articles on mitochondrial homeostasis in odontoblasts were evaluated for information pertinent to include in this narrative review. This narrative review focused on understanding the complex interplay between mitochondrial homeostasis in odontoblasts under physiological and pathological conditions. Furthermore, mitochondria-centered therapeutic strategies (including mitochondrial base editing, targeting platforms, and mitochondrial transplantation) were emphasized by resolving key genes that regulate mitochondrial function. Mitochondria are involved in odontoblast differentiation and function, and act as mitochondrial danger-associated molecular patterns (mtDAMPs) to mediate odontoblast pathological progression. Novel mitochondria-centered therapeutic strategies are particularly attractive as emerging therapeutic approaches for the maintenance of mitochondrial homeostasis. It is expected to probe key events of odontoblast differentiation and advance the clinical resolution of dentin formation and mineralization disorders and odontoblast-related diseases.
PubMed: 38917871
DOI: 10.1016/j.lfs.2024.122797