-
Foods (Basel, Switzerland) Jun 2024The preparation of a novel composite carrier of polydopamine-modified carbon fiber/polyurethane foam (PDA-CF/PUF) was proposed to improve cell immobilization and the...
The preparation of a novel composite carrier of polydopamine-modified carbon fiber/polyurethane foam (PDA-CF/PUF) was proposed to improve cell immobilization and the fermentation of xylitol, which is an important food sweetener and multifunctional food additive. was immobilized on the composite carrier by adsorption and covalent binding. The properties and immobilization mechanism of the composite carrier and its effect on immobilized cells were investigated. It showed that the modification of PDA enhanced the loading of CF on the PUF surface and the adhesion of cells on the composite carrier surface. Also, the biocompatibility of carriers to cells was improved. In addition, the introduction of PDA increased the active groups on the surface of the carrier, enhanced the hydrophilicity, promoted the cells immobilization, and increased the xylitol yield. It was also found that expression of the related gene XYL1 in cells was significantly increased after the immobilization of the PDA-CF/PUF composite carrier during the fermentation. The PDA-CF/PUF was an immobilized carrier with the excellent biocompatibility and immobilization performance, which has great development potential in the industrial production of xylitol.
PubMed: 38928852
DOI: 10.3390/foods13121911 -
International Journal of Molecular... Jun 2024Polyurethane/silk protein-bismuth halide oxide composite films were fabricated using a blending-wet phase transformationin situsynthesis method. The crystal structure,...
Polyurethane/silk protein-bismuth halide oxide composite films were fabricated using a blending-wet phase transformationin situsynthesis method. The crystal structure, micromorphology, and optical properties were conducted using XRD, SEM, and UV-Vis DRS characterize techniques. The results indicated that loaded silk protein enhanced the hydrophilicity and pore structure of the polyurethane composite films. The active species BiOX were observed to grow as nanosheets with high dispersion on the internal skeleton and silk protein surface of the polyurethane-silk protein film. The photocatalytic efficiency of BiOX/PU-SF composite films was assessed through the degradation of Rhodamine B under visible light irradiation. Among the tested films, the BiOBr/PU-SF composite exhibited the highest removal rate of RhB at 98.9%, surpassing the removal rates of 93.7% for the BiOCl/PU-SF composite and 85.6% for the BiOI/PU-SF composite. Furthermore, an active species capture test indicated that superoxide radical (•O) and hole (h) species played a predominant role in the photodegradation process.
Topics: Polyurethanes; Photolysis; Hydrophobic and Hydrophilic Interactions; Bismuth; Catalysis; Silk; Rhodamines; Coloring Agents; Oxides; Porosity; Light
PubMed: 38928359
DOI: 10.3390/ijms25126653 -
International Journal of Molecular... Jun 2024Polyurethane (PU) is a promising material for addressing challenges in bone grafting. This study was designed to enhance the bone grafting capabilities of PU by...
Polyurethane (PU) is a promising material for addressing challenges in bone grafting. This study was designed to enhance the bone grafting capabilities of PU by integrating hydroxyapatite (HAp), which is known for its osteoconductive and osteoinductive potential. Moreover, a uniform distribution of HAp in the porous structure of PU increased the effectiveness of bone grafts. PEG/APTES-modified scaffolds were prepared through self-foaming reactions. A uniform pore structure was generated during the spontaneous foaming reaction, and HAp was uniformly distributed in the PU structure (PU15HAp and PU30HAp) during foaming. Compared with the PU scaffolds, the HAp-modified PU scaffolds exhibited significantly greater protein absorption. Importantly, the effect of the HAp-modified PU scaffold on bone repair was tested in a rat calvarial defect model. The microstructure of the newly formed bone was analyzed with microcomputed tomography (μ-CT). Bone regeneration at the defect site was significantly greater in the HAp-modified PU scaffold group than in the PU group. This innovative HAp-modified PU scaffold improves current bone graft materials, providing a promising avenue for improved bone regeneration.
Topics: Polyurethanes; Animals; Durapatite; Tissue Scaffolds; Rats; Bone Regeneration; Skull; Rats, Sprague-Dawley; X-Ray Microtomography; Male; Porosity; Bone Transplantation
PubMed: 38928145
DOI: 10.3390/ijms25126440 -
Bioengineering (Basel, Switzerland) Jun 2024The human heart's remarkable vitality necessitates a deep understanding of its mechanics, particularly concerning cardiac device leads. This paper presents advancements...
The human heart's remarkable vitality necessitates a deep understanding of its mechanics, particularly concerning cardiac device leads. This paper presents advancements in finite element modeling for cardiac leads and 3D heart models, leveraging computational simulations to assess lead behavior over time. Through detailed modeling and meshing techniques, we accurately captured the complex interactions between leads and heart tissue. Material properties were assigned based on ASTM (American Society for Testing and Materials) standards and in vivo exposure data, ensuring realistic simulations. Our results demonstrate close agreement between experimental and simulated data for silicone insulation in pacemaker leads, with a mean force tolerance of 19.6 N ± 3.6 N, an ultimate tensile strength (UTS) of 6.3 MPa ± 1.15 MPa, and a percentage elongation of 125% ± 18.8%, highlighting the effectiveness of simulation in predicting lead performance. Similarly, for polyurethane insulation in ICD leads, we found a mean force of 65.87 N ± 7.1 N, a UTS of 10.7 MPa ± 1.15 MPa, and a percentage elongation of 259.3% ± 21.4%. Additionally, for polyurethane insulation in CRT leads, we observed a mean force of 53.3 N ± 2.06 N, a UTS of 22.11 MPa ± 0.85 MPa, and a percentage elongation of 251.6% ± 13.2%. Correlation analysis revealed strong relationships between mechanical properties, further validating the simulation models. Classification models constructed using both experimental and simulated data exhibited high discriminative ability, underscoring the reliability of simulation in analyzing lead behavior. These findings contribute to the ongoing efforts to improve cardiac device lead design and optimize patient outcomes.
PubMed: 38927800
DOI: 10.3390/bioengineering11060564 -
Angewandte Chemie (International Ed. in... Jun 2024Structural adhesives that do not require heating are in high demand in the automotive and electronics industries. However, it remains a challenge to develop robust...
Structural adhesives that do not require heating are in high demand in the automotive and electronics industries. However, it remains a challenge to develop robust adhesives that rapidly achieve super adhesion near ambient temperature. Herein, a room-temperature curable, fast-bonding, and super strong epoxy-based structural adhesive was designed from the perspective of cross-scale structure, which lies in threefold pivotal aspects: (i) high branching topology of glycerol carbonate-capped polyurethane (PUGC) increases the kinetics of the ring-opening reaction, contributing to fast crosslinking and the formation of abundant urethane and hydroxyl moieties; (ii) asynchronous crosslinking of epoxy and PUGC synergistically induces phase separation of PUGC within the epoxy resin and the resulting PUGC domains surrounded by interpenetrated shell serves to efficiently toughen the matrix; (iii) abundant dynamic hydrogen bonds including urethane and hydroxyl moieties, along with the elastomeric PUGC domains, dissipate energy of shearing force. As a result, the adhesive strength rapidly grows to 16 MPa within 4 hours, leveling off to 21 MPa after 7 hours, substantially outperforming commercial room-temperature curable epoxy adhesives. The results of this study could advance the field of high-performance adhesives and provide valuable insights into designing materials for efficient curing at room temperature.
PubMed: 38927000
DOI: 10.1002/anie.202408840 -
Advanced Science (Weinheim,... Jun 2024Tremendous popularity is observed for multifunctional flexible electronics with appealing applications in intelligent electronic skins, human-machine interfaces, and...
Tremendous popularity is observed for multifunctional flexible electronics with appealing applications in intelligent electronic skins, human-machine interfaces, and healthcare sensing. However, the reported sensing electronics, mostly can hardly provide ultrasensitive sensing sensitivity, wider sensing range, and robust cycling stability simultaneously, and are limited of efficient heat conduction out from the contacted skin interface after wearing flexible electronics on human skin to satisfy thermal comfort of human skin. Inspired from the ultrasensitive tactile perception microstructure (epidermis/spinosum/signal transmission) of human skin, a flexible comfortably wearable ultrasensitive electronics is hereby prepared from thermal conductive boron nitride nanosheets-incorporated polyurethane elastomer matrix with MXene nanosheets-coated surface microdomes as epidermis/spinosum layers assembled with interdigitated electrode as sensing signal transmission layer. It demonstrates appealing sensing performance with ultrasensitive sensitivity (≈288.95 kPa), up to 300 kPa sensing range, and up to 20 000 sensing cycles from obvious contact area variation between microdome microstructures and the contact electrode under external compression. Furthermore, the bioinspired electronics present advanced thermal management by timely efficient thermal dissipation out from the contacted skin surface to meet human skin thermal comfort with the incorporated thermal conductive boron nitride nanosheets. Thus, it is vitally promising in wearable artificial electronic skins, intelligent human-interactive sensing, and personal health management.
PubMed: 38924313
DOI: 10.1002/advs.202401800 -
Cureus May 2024Several approaches have been suggested for implant removal. However, further research is necessary to review data regarding the amount of bone removed and the duration...
PURPOSE
Several approaches have been suggested for implant removal. However, further research is necessary to review data regarding the amount of bone removed and the duration of removal time for different procedures. This study evaluates and compares various implant removal techniques. Materials and methods: A polyurethane block was scanned to create an implant surgical guide. Afterward, implant-guided surgery was performed on 60 simulated bone blocks. The implants were then separated into four groups and removed utilizing the counter-torque ratchet, trephine drills, burs, and piezosurgery.
RESULTS
For the weight of bone loss, there were significant differences in the median between the counter-torque ratchet technique (CTRT) and trephine (p < 0.01), CTRT and bur (p < 0.01), trephine and piezo (p < 0.01), and bur and piezo (p = 0.04). All groups, except CTRT and the piezo group, demonstrated a statistically significant difference (p < 0.01) in the procedure durations. Regarding the volume of bone loss, a statistically significant difference (p < 0.01) was found between each group. Conclusions: CTRT showed the least amount of bone loss. On the other hand, the trephine technique was demonstrated to be the fastest. It is essential to consider the limitations and risks when choosing the approach for implant removal.
PubMed: 38919230
DOI: 10.7759/cureus.61104 -
ACS Nano Jun 2024Elastic electromagnetic fibers are promising building blocks for next-generation flexible electronics. However, fabrication of elastic fibers is still difficult and...
Elastic electromagnetic fibers are promising building blocks for next-generation flexible electronics. However, fabrication of elastic fibers is still difficult and usually requires organic solvents or high temperatures, restricting their widespread applications. Furthermore, the continuous production of electromagnetic fibers has not been realized previously. In this study, we propose an ionic chelation strategy to continuously produce electromagnetic fibers with a magnetic liquid metal (MLM) as the core and elastic polyurethane as the sheath in water at room temperature. Sodium alginate (SA) has been introduced to rapidly chelate with calcium ions (Ca) in a coagulation bath to support the continuous spinning of waterborne polyurethane (WPU) as a sheath. Meanwhile, WPU-encapsulated MLM microparticles efficiently suppress the fluid instability of MLM for continuous extrusion as the core. The resultant fiber exhibits excellent mechanical performances (tensile strength and toughness up to 32 MPa and 124 MJ/m, respectively), high conductive stability in large deformations (high conductivity of 7.6 × 10 S/m at 580% strain), and magnetoactive properties. The applications of this electromagnetic fiber have been demonstrated by conductance-stable wires, sensors, actuation, and electromagnetic interference shielding. This work offers a water-based molecular principle for efficient and green fabrication of multifunctional fibers and will inspire a series of applications.
PubMed: 38916583
DOI: 10.1021/acsnano.4c04455 -
RSC Advances Jun 2024Advances in high-efficiency solar cells introduce photon management challenges, including the difficult texturization of flat surfaces and low photon utilization at...
Advances in high-efficiency solar cells introduce photon management challenges, including the difficult texturization of flat surfaces and low photon utilization at short wavelengths. While bifacial crystalline silicon solar cells have a front pyramid structure and SiN layers reduce reflections, managing photons on the flat backside remains a challenge. To enhance light utilization, a soft nanoimprint technique was utilized to create pyramid micro-structured polyurethane films doped with europium (Eu) complex. These films, which possess anti-reflection and down-conversion properties, can be applied externally to various high-efficiency solar cells without compromising electrical performance. Research on the backside of bifacial PERC solar cells revealed that the optimal composite functional film increases the integrated current by 5.70%, with a 1.27% gain from down-conversion effects. This specialized film presents a novel approach to interface matching for different types of solar cells.
PubMed: 38915332
DOI: 10.1039/d4ra03397c -
Journal of Materials Chemistry. B Jun 2024Postoperative adhesions, a prevalent complication following abdominal surgery, affect 90% of patients undergoing abdominal surgical procedures. Currently, the primary...
Postoperative adhesions, a prevalent complication following abdominal surgery, affect 90% of patients undergoing abdominal surgical procedures. Currently, the primary approach to prevent postoperative adhesions involves physical isolation of the surgical site and surrounding tissues using a hydrogel; however, this method represents a rudimentary strategy. Herein, considering the impact of oxidative stress and free radicals on postoperative adhesion during wound healing, an injectable antioxidant hydrogel, named PU-OHA-D, was successfully synthesized, which is formed by the crosslinking of dopamine-modified oxidized hyaluronic acid (OHA-D) and dihydrazide-terminated polyurethane (PU-ADH) through hydrazone bonding. PU-OHA-D hydrogel possesses versatile characteristics such as rapid gel formation, injectability, self-repair capability and biodegradability. Additionally, they exhibit an excellent ability to clear free radicals and superior tissue adhesion. PU-OHA-D can be injected to form a hydrogel to prevent abdominal wall-cecum adhesion. Importantly, it can effectively eliminate free radicals and inhibit oxidative stress at the wound site. Thereby, it leads to collagen physiological degradation and prevents the occurrence of postoperative adhesions. The bioinspired hydrogel demonstrates its great potential in preventing postoperative adhesion and promoting wound healing.
PubMed: 38915270
DOI: 10.1039/d4tb00805g