-
Endokrynologia Polska Jun 2024Beyond growth acceleration, growth hormone (GH) therapy improves body composition of GH-deficient (GHD) children due to the interaction of GH with lipid and carbohydrate...
INTRODUCTION
Beyond growth acceleration, growth hormone (GH) therapy improves body composition of GH-deficient (GHD) children due to the interaction of GH with lipid and carbohydrate metabolism, possibly mediated by adipokines secreted by adipose tissue and ghrelin. To promote linear growth, it is essential to have normal phosphate homeostasis. Fibroblast growth factor 23 (FGF23) is a known regulator of serum phosphorus and may be responsible for the increased renal phosphorus reabsorption observed during GH therapy. This study aimed to assess the impact of one-year GH therapy on body composition, adipokines, acylated/unacylated ghrelin (AG/UAG), and FGF23 in GHD children.
MATERIAL AND METHODS
A prospective observational study of 42 prepubertal, non-obese GHD children followed up in the first year of GH replacement therapy, investigating changes in adipokine profiles, AG/UAG, FGF23, and body composition. Data before therapy onset were compared with measurements obtained after 6 and 12 months of GH therapy.
RESULTS
All children with a mean age of 9.2 ± 2.6 years grew at an accelerated pace. Total body fat decreased significantly, while the lipid profile improved, and total bone mineral density (BMD) significantly increased over the 12 months of treatment. Leptin and UAG levels decreased significantly, whereas adiponectin and AG values increased. A significant increase in plasma FGF23 and insulin growth factor 1 (IGF1) was accompanied by increased serum phosphate. Changes in FGF23 concentration did not have an impact on BMD. The strong association of FGF23 with IGF1 and height standard deviation (SD) could reveal a role of FGF23 in linear growth. In regression analysis models, GH therapy influences the changes of leptin and adiponectin, but not ghrelin, independently of body composition - lean or fat mass.
CONCLUSIONS
GH replacement therapy improves body composition and adipokine profile in GHD children and directly impacts leptin and adiponectin concentrations independently of body composition. Also, GHD children have increased serum phosphate, correlated with upregulation rather than with suppression of FGF23, an unexpected observation given the phosphaturic role of FGF23. Further research is needed to identify the molecular mechanisms by which the GH/IGF1 axis influences adipokines secretion and plasma changes of FGF23.
PubMed: 38923900
DOI: 10.5603/ep.98923 -
Nanomaterials (Basel, Switzerland) Jun 2024This work highlights the novel approach of incorporating potassium iodide (KI) doping during the synthesis of InP core quantum dots (QDs) to significantly reduce the...
This work highlights the novel approach of incorporating potassium iodide (KI) doping during the synthesis of InP core quantum dots (QDs) to significantly reduce the concentration of vacancies (i.e., In vacancies; ) within the bulk of the core QD and inhibit the formation of InPO at the core QD-ZnSe shell interfaces. The photoluminescence quantum yield (PLQY) of ~97% and full width at half maximum (FWHM) of ~40 nm were achieved for InP/ZnSe/ZnSeS/ZnS core/multi-shell QDs emitting red light, which is essential for a quantum-dot organic light-emitting diode (QD-OLED) without red, green, and blue crosstalk. KI doping eliminated in the core QD bulk by forming K- substitutes and effectively inhibited the formation of InPO(HO) at the core QD-ZnSe shell interface through the passivation of phosphorus (P)-dangling bonds by P-I bonds. The elimination of vacancies in the core QD bulk was evidenced by the decreased relative intensity of non-radiative unpaired electrons, measured by electron spin resonance (ESR). Additionally, the inhibition of InPO(HO) formation at the core QD and shell interface was confirmed by the absence of the {210} X-ray diffraction (XRD) peak intensity for the core/multi-shell QDs. By finely tuning the doping concentration, the optimal level was achieved, ensuring maximum K- substitution, minimal K and I interstitials, and maximum P-dangling bond passivation. This resulted in the smallest core QD diameter distribution and maximized optical properties. Consequently, the maximum PLQY (~97%) and minimum FWHM (~40 nm) were observed at 3% KI doping. Furthermore, the color gamut of a QD-OLED display using R-, G-, and B-QD functional color filters (i.e., ~131.1%@NTSC and [email protected]) provided a nearly perfect color representation, where red-light-emitting KI-doped QDs were applied.
PubMed: 38921931
DOI: 10.3390/nano14121055 -
Nanomaterials (Basel, Switzerland) Jun 2024A composite material of tungsten carbide and mesoporous carbon was synthesized by the sol-gel polycondensation of resorcinol and formaldehyde, using...
A composite material of tungsten carbide and mesoporous carbon was synthesized by the sol-gel polycondensation of resorcinol and formaldehyde, using cetyltrimethylammonium bromide as a surfactant and Ludox HS-40 as a porogen, and served as a support for Pd-based electrodes. Phosphorus-modified Pd particles were deposited onto the support using an NH-mediated polyol reduction method facilitated by sodium hypophosphite. Remarkably small Pd nanoparticles with a diameter of ca. 4 nm were formed by the phosphorus modification. Owing to the high dispersion of Pd and its strong interaction with tungsten carbide, the Pd nanoparticles embedded in the tungsten carbide/mesoporous carbon composite exhibited a hydrogen oxidation activity approximately twice as high as that of the commercial Pt/C catalyst under the anode reaction conditions of proton exchange membrane fuel cells.
PubMed: 38921900
DOI: 10.3390/nano14121024 -
Marine Drugs Jun 2024The addition of marine macroalgae to animal feed has garnered interest due to the demonstrated benefits of gut health in many livestock species. Most macroalgae have a...
The addition of marine macroalgae to animal feed has garnered interest due to the demonstrated benefits of gut health in many livestock species. Most macroalgae have a higher mineral content than terrestrial vegetables, making them an attractive, sustainable source of minerals. However, some macroalgae contain elevated concentrations of iodine and arsenic, which may be transferred to the meat of livestock fed with macroalgae. This study evaluated the mineral profile of rabbit serum, muscle, liver, and kidney of rabbits fed diets supplemented with different marine macroalgae, with the goal of improving post-weaning gut health and reducing reliance on antibiotics. We found increased deposition of iodine in muscle, liver, and kidney due to macroalgae supplementation, which is particularly promising for regions with low iodine endemicity. Higher, though relatively low arsenic concentrations, compared to those in other animal meats and food sources, were also detected in the muscle, liver, and kidney of macroalgae-fed rabbits. The absence of apparent interactions with other micronutrients, particularly selenium, suggests that the inclusion of macroalgae in rabbit diets will not affect the overall mineral content. Enhanced bioavailability of elements such as phosphorus and iron may provide additional benefits, potentially reducing the need for mineral supplementation.
Topics: Animals; Rabbits; Seaweed; Kidney; Dietary Supplements; Liver; Animal Feed; Muscles; Minerals; Iodine; Male; Arsenic; Diet
PubMed: 38921574
DOI: 10.3390/md22060263 -
Journal of Functional Biomaterials Jun 2024Titanium has a long history of clinical use, but the naturally forming oxide is not ideal for bacterial resistance. Anodization processes can modify the crystallinity,...
Titanium has a long history of clinical use, but the naturally forming oxide is not ideal for bacterial resistance. Anodization processes can modify the crystallinity, surface topography, and surface chemistry of titanium oxides. Anatase, rutile, and mixed phase oxides are known to exhibit photocatalytic activity (PCA)-driven bacterial resistance under UVA irradiation. Silver additions are reported to enhance PCA and reduce bacterial attachment. This study investigated the effects of silver-doping additions to three established anodization processes. Silver doping showed no significant influence on oxide crystallinity, surface topography, or surface wettability. Oxides from a sulfuric acid anodization process exhibited significantly enhanced PCA after silver doping, but silver-doped oxides produced from phosphoric-acid-containing electrolytes did not. attachment was also assessed under dark and UVA-irradiated conditions on each oxide. Each oxide exhibited a photocatalytic antimicrobial effect as indicated by significantly decreased bacterial attachment under UVA irradiation compared to dark conditions. However, only the phosphorus-doped mixed anatase and rutile phase oxide exhibited an additional significant reduction in bacteria attachment under UVA irradiation as a result of silver doping. The antimicrobial success of this oxide was attributed to the combination of the mixed phase oxide and higher silver-doping uptake levels.
PubMed: 38921536
DOI: 10.3390/jfb15060163 -
Membranes Jun 2024This study explores the effectiveness of an integrated anaerobic membrane bioreactor (AnMBR) coupled with an anoxic/oxic membrane bioreactor (A/O MBR) for the treatment...
This study explores the effectiveness of an integrated anaerobic membrane bioreactor (AnMBR) coupled with an anoxic/oxic membrane bioreactor (A/O MBR) for the treatment of natural rubber industry wastewater with high sulfate, ammonia, and complex organic contents. This study was conducted at the lab-scale over a duration of 225 days to thoroughly investigate the efficiency and sustainability of the proposed treatment method. With a hydraulic retention time of 6 days for the total system, COD reductions were over 98%, which reduced the influent from 22,158 ± 2859 mg/L to 118 ± 74 mg/L of the effluent. The system demonstrates average NH-N, TN, and total phosphorus (TP) removal efficiencies of 72.9 ± 5.7, 72.8 ± 5.6, and 71.3 ± 9.9, respectively. Despite an average whole biological system removal of 50.6%, the anaerobic reactor eliminated 44.9% of the raw WW sulfate. Analyses of membrane fouling revealed that organic fouling was more pronounced in the anaerobic membrane, whereas aerobic membrane fouling displayed varied profiles due to differential microbial and oxidative activities. Key bacterial genera, such as Desulfobacterota in the anaerobic stage and nitrifiers in the aerobic stage, are identified as instrumental in the biological processes. The microbial profile reveals a shift from methanogenesis to sulfide-driven autotrophic denitrification and sulfammox, with evidence of an active denitrification pathway in anaerobic/anoxic conditions. The system showcases its potential for industrial application, underpinning environmental sustainability through improved wastewater management.
PubMed: 38921497
DOI: 10.3390/membranes14060130 -
Journal of Fungi (Basel, Switzerland) Jun 2024Eucalyptus roots form symbiotic relationships with arbuscular mycorrhizal (AM) fungi in soil to enhance adaptation in challenging environments. However, the evolution of...
Eucalyptus roots form symbiotic relationships with arbuscular mycorrhizal (AM) fungi in soil to enhance adaptation in challenging environments. However, the evolution of the AM fungal community along a chronosequence of eucalypt plantations and its relationship with soil properties remain unclear. In this study, we evaluated the tree growth, soil properties, and root AM fungal colonization of W. Hill ex Maiden plantations at different ages, identified the AM fungal community composition by high-throughput sequencing, and developed a structural equation model among trees, soil, and AM fungi. Key findings include the following: (1) The total phosphorus (P) and total potassium (K) in the soil underwent an initial reduction followed by a rise with different stand ages. (2) The rate of AM colonization decreased first and then increased. (3) The composition of the AM fungal community changed significantly with different stand ages, but there was no significant change in diversity. (4) and were the dominant genera, accounting for 70.1% and 21.8% of the relative abundance, respectively. (5) The dominant genera were mainly influenced by soil P, the N content, and bulk density, but the main factors were different with stand ages. The results can provide a reference for fertilizer management and microbial formulation manufacture for eucalyptus plantations.
PubMed: 38921389
DOI: 10.3390/jof10060404 -
Current Issues in Molecular Biology May 2024Plants being sessile are exposed to different environmental challenges and consequent stresses associated with them. With the prerequisite of minerals for growth and... (Review)
Review
Plants being sessile are exposed to different environmental challenges and consequent stresses associated with them. With the prerequisite of minerals for growth and development, they coordinate their mobilization from the soil through their roots. Phosphorus (P) and iron (Fe) are macro- and micronutrient; P serves as an important component of biological macromolecules, besides driving major cellular processes, including photosynthesis and respiration, and Fe performs the function as a cofactor for enzymes of vital metabolic pathways. These minerals help in maintaining plant vigor via alterations in the pH, nutrient content, release of exudates at the root surface, changing dynamics of root microbial population, and modulation of the activity of redox enzymes. Despite this, their low solubility and relative immobilization in soil make them inaccessible for utilization by plants. Moreover, plants have evolved distinct mechanisms to cope with these stresses and coregulate the levels of minerals (Fe, P, etc.) toward the maintenance of homeostasis. The present study aims at examining the uptake mechanisms of Fe and P, and their translocation, storage, and role in executing different cellular processes in plants. It also summarizes the toxicological aspects of these minerals in terms of their effects on germination, nutrient uptake, plant-water relationship, and overall yield. Considered as an important and indispensable component of sustainable agriculture, a separate section covers the current knowledge on the cross-talk between Fe and P and integrates complete and balanced information of their effect on plant hormone levels.
PubMed: 38920984
DOI: 10.3390/cimb46060312 -
Gels (Basel, Switzerland) Jun 2024Effective forest fire suppression remains a critical challenge, necessitating innovative solutions. Temperature-sensitive hydrogels represent a promising avenue in this...
Effective forest fire suppression remains a critical challenge, necessitating innovative solutions. Temperature-sensitive hydrogels represent a promising avenue in this endeavor. Traditional firefighting methods often struggle to address forest fires efficiently while mitigating ecological harm and optimizing resource utilization. In this study, a novel intelligent temperature-sensitive hydrogel was prepared specially for forest fire extinguishment. Utilizing a one-pot synthesis approach, this material demonstrates exceptional fluidity at ambient temperatures, facilitating convenient application and transport. Upon exposure to elevated temperatures, it undergoes a phase transition to form a solid, barrier-like structure essential for containing forest fires. The incorporation of environmentally friendly phosphorus salts into the chitosan/hydroxypropyl methylcellulose gel system enhances the formation of temperature-sensitive hydrogels, thereby enhancing their structural integrity and firefighting efficacy. Morphological and thermal stability analyses elucidate the outstanding performance, with the hydrogel forming a dense carbonized layer that acts as a robust barrier against the spread of forest fires. Additionally, comprehensive evaluations employing rheological tests, cone calorimeter tests, a swelling test, and infrared thermography reveal the multifaceted roles of temperature-sensitive hydrogels in forest fire prevention and suppression strategies.
PubMed: 38920936
DOI: 10.3390/gels10060390 -
Gels (Basel, Switzerland) Jun 2024In energy applications, the use of materials with hierarchical porous structures and large surface areas is essential for efficient charge storage. These structures... (Review)
Review
In energy applications, the use of materials with hierarchical porous structures and large surface areas is essential for efficient charge storage. These structures facilitate rapid electron and ion transport, resulting in high power density and quick charge/discharge capabilities. Carbon-based materials are extensively utilized due to their tunable properties, including pore sizes ranging from ultra- to macropores and surface polarity. Incorporating heteroatoms such as nitrogen, oxygen, sulfur, phosphorus, and boron modifies the carbon structure, enhancing electrocatalytic properties and overall performance. A hierarchical pore structure is necessary for optimal performance, as it ensures efficient access to the material's core. The microstructure of carbon materials significantly impacts energy storage, with factors like polyaromatic condensation, crystallite structure, and interlayer distance playing crucial roles. Carbon aerogels, derived from the carbonization of organic gels, feature a sponge-like structure with large surface area and high porosity, making them suitable for energy storage. Their open pore structure supports fast ion transfer, leading to high energy and power densities. Challenges include maintaining mechanical or structural integrity, multifunctional features, and scalability. This review provides an overview of the current progress in carbon-based aerogels for energy applications, discussing their properties, development strategies, and limitations, and offering significant guidance for future research requirements.
PubMed: 38920935
DOI: 10.3390/gels10060389