-
Cureus May 2024The tongue supports the upper dental arch and encourages healthy dental arch development when it rests against the roof of the mouth. On the other hand, over time,... (Review)
Review
The tongue supports the upper dental arch and encourages healthy dental arch development when it rests against the roof of the mouth. On the other hand, over time, malocclusion can result from incorrect tongue position, such as lying low in the mouth or thrusting forward during swallowing or speaking. As a muscular organ, the tongue applies forces to the jaws and teeth that may help with malocclusion or hinder it from aligning properly. The dentition and jaws grow and align according to the way the tongue, teeth, and surrounding structures interact. The tongue's morphogenetic function includes forming the arches and having an important impact on the maxillary complex's development. The tongue frequently assumes a balancing and compensatory function in subsequent phases, functioning more or less like a natural orthodontic bite. In adults, the tongue is able to compensate for problems like open bites, teeth that are out of alignment, or differences in the occlusal and sagittal planes of the spine. In this context, the tongue's ability to sustain occlusion during malocclusion can be considered a compensatory response. This is comparable to how lingual dysfunction may contribute to malocclusion or act as a potential source of recurring orthodontic instability. In order to diagnose and treat orthodontic issues, dental professionals must know the connection between tongue position and dental malocclusion. Malocclusion can be prevented or minimized with early intervention, such as myofunctional therapy to correct tongue position and habits, improving dental health and well-being overall.
PubMed: 38947580
DOI: 10.7759/cureus.61281 -
Cureus May 2024Brushing older adults or intubated patients who are unable to rinse can transmit bacteria from dental plaque into the oral cavity and increase the risk of aspiration...
INTRODUCTION
Brushing older adults or intubated patients who are unable to rinse can transmit bacteria from dental plaque into the oral cavity and increase the risk of aspiration pneumonia. Therefore, this study examined brushing methods to prevent the spread of bacteria in the oral cavity. Methods:Three types of brushing methods were performed on five volunteers by dental hygienists (water group: brushing with toothbrush bristles soaked in water; gel group: brushing with a moisturizing gel placed on the toothbrush; PV-I group: brushing with toothbrush bristles dipped in povidone-iodine). Neither group spat out the saliva or gargled during brushing but brushed while wiping the water/gel/PV-I solution with a sponge brush. The same five volunteers served as subjects for the three methods. Saliva was collected before and after brushing, and the number of colonies was determined using bacterial culture. Results:The water group demonstrated a significantly increased number of bacteria in the saliva owing to the spread of bacteria from the dental plaque. The gel group prevented the spread of the bacteria. The PV-I group showed a significant decrease in the number of bacteria in the saliva after brushing.
CONCLUSIONS
Brushing with toothbrush bristles dipped in a povidone-iodine solution is recommended for intubated or older adult patients who cannot gargle.
PubMed: 38947579
DOI: 10.7759/cureus.61277 -
IDCases 2024Kaposi sarcoma is an indolent angio-proliferative spindle- cell tumor derived from endothelial and immune cells infected with Human herpes virus type 8(HHV-8). In the...
Kaposi sarcoma is an indolent angio-proliferative spindle- cell tumor derived from endothelial and immune cells infected with Human herpes virus type 8(HHV-8). In the era of highly active antiretroviral (HAART), Kaposi sarcoma is a rare form of initial presentation of HIV infection [1]. The author presents a case of diffuse gingival hypertrophied Kaposi sarcoma in 18-year-old male newly diagnosed RVI patient. After confirming the diagnosis patient started on HAART and mouth care. Surgical excision is the first line of treatment with HAART, since this patient has low CD4 count of 30 cells/mm3 which will complicate the surgery. So, we are waiting for CD4 count to increase above 200 cells/mm3 to undergo surgical excision. The case is representative of HIV complexity and aimed to bring awareness of unusual presentation of HIV.This case also reminds us how important early initiation of HAART is.
PubMed: 38947560
DOI: 10.1016/j.idcr.2024.e02003 -
Clinical Case Reports Jul 2024VEXAS syndrome (vacuoles, E1 enzyme, X-linked, autoinflammatory, somatic) is a novel autoinflammatory syndrome. We describe a case of VEXAS syndrome with upper airway...
VEXAS syndrome (vacuoles, E1 enzyme, X-linked, autoinflammatory, somatic) is a novel autoinflammatory syndrome. We describe a case of VEXAS syndrome with upper airway and oral cavity involvement which are not well described in the literature.
PubMed: 38947541
DOI: 10.1002/ccr3.9126 -
Journal of Indian Prosthodontic Society Jul 2024The aim of this study was to compare the marginal fit of prefabricated occlusal veneers with computer-aided design/computer-aided manufacturing (CAD-CAM)-milled zirconia... (Comparative Study)
Comparative Study
A comparative evaluation of marginal fit and microleakage of computer-aided design/computer-aided manufacturing-milled zirconia and prefabricated posterior occlusal veneers: An in vitrostudy.
AIMS
The aim of this study was to compare the marginal fit of prefabricated occlusal veneers with computer-aided design/computer-aided manufacturing (CAD-CAM)-milled zirconia occlusal veneers in the posterior teeth.
SETTINGS AND DESIGN
Forty extracted human maxillary premolars were divided into two groups of 20 each. Group 1 was prepared to receive prefabricated occlusal veneers, and Group 2 was prepared to receive CAD-CAM-milled zirconia occlusal veneers.
MATERIALS AND METHODS
Prefabricated samples (Edelweiss) were selected for Group 1, whereas for Group 2, the tooth preparations were scanned, and occlusal veneers were fabricated using Exocad designing software and milling machine. After luting, both the groups were submerged in dye, sectioned, and evaluated for marginal fit and microleakage under a stereomicroscope using the microscope imaging software and its measurement tool.
STATISTICAL ANALYSIS USED
Data collected were subjected to statistical analysis using SPSS 27.0. Intragroup and intergroup comparison was done using the Mann-Whitney U test. The Chi-square test was applied to check the depth of penetration of dye based on percentages.
RESULTS
The marginal gap of zirconia occlusal veneers fabricated with CAD-CAM is higher compared to that of prefabricated occlusal veneers. Similarly, the depth of penetration of dye is higher in CAD-CAM-milled zirconia occlusal veneers than prefabricated occlusal veneers.
CONCLUSION
The marginal fit of prefabricated occlusal veneer is better than the marginal fit of zirconia occlusal veneers fabricated with CAD-CAM. Similarly, it can also be concluded that the microleakage of prefabricated occlusal veneer is less compared to the CAD-CAM-milled zirconia occlusal veneers.
Topics: Dental Veneers; Zirconium; Computer-Aided Design; Humans; Dental Marginal Adaptation; Dental Leakage; Dental Prosthesis Design; In Vitro Techniques; Bicuspid
PubMed: 38946505
DOI: 10.4103/jips.jips_346_23 -
Journal of Indian Prosthodontic Society Jul 2024The aim of this umbrella review was to systematically review the systematic reviews on antagonist enamel wear opposing zirconia crowns compared to other ceramics and... (Review)
Review Comparative Study
AIM
The aim of this umbrella review was to systematically review the systematic reviews on antagonist enamel wear opposing zirconia crowns compared to other ceramics and natural enamel.
SETTINGS AND DESIGN
This was an umbrella review following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines.
MATERIALS AND METHODS
An electronic search of PubMed, Cochrane Central, EBSCOhost, and Google Scholar search engines for articles published from January 1, 2013, to January 1, 2023, was conducted using keywords "enamel wear," "zirconia," "feldspathic," "dental ceramics," and "Y-TZP" to identify systematic reviews on antagonist enamel wear opposing zirconia crowns compared to other ceramics and natural enamel.
STATISTICAL ANALYSIS USED
Qualitative analysis.
RESULTS
A total of 86 articles were obtained through electronic search, of which four articles were selected after abstract screening that met the inclusion criteria for evaluating antagonist enamel wear. As compared to feldspathic groups, zirconia had substantially less antagonist wear, while surface polishing exhibited less enamel wear than glazing. Because of the heterogeneity in study design, measurement methods, and outcome variables, a meta-analysis was not possible.
CONCLUSIONS
Over time, the opposing enamel wear caused by polished monolithic zirconia will be either equal to or less than that of natural enamel wear. Polished monolithic zirconia also maintains lower values of enamel wear compared to metal ceramics, feldspathic porcelains, and lithium disilicate.
Topics: Zirconium; Humans; Crowns; Ceramics; Dental Enamel; Tooth Wear
PubMed: 38946503
DOI: 10.4103/jips.jips_32_24 -
How well do antimicrobial mouth rinses prevent dysbiosis in an in vitro periodontitis biofilm model?Journal of Periodontology Jun 2024Periodontal diseases are associated with dysbiosis in the oral microbial communities. Managing oral biofilms is therefore key for preventing these diseases. Management...
BACKGROUND
Periodontal diseases are associated with dysbiosis in the oral microbial communities. Managing oral biofilms is therefore key for preventing these diseases. Management protocols often include over-the-counter antimicrobial mouth rinses, which lack data on their effects on the oral microbiome's ecology, bacterial composition, metabolic activity, and dysbiosis resilience. This study examined the efficacy of antimicrobial mouth rinses to halt dysbiosis in in vitro oral biofilms under periodontitis-simulating conditions.
METHODS
Multispecies oral biofilms were grown on hydroxyapatite discs (HADs) and rinsed daily with one of six mouth rinses. Positive and negative controls were included. After three rinses, biofilms were analyzed with viability quantitative polymerase chain reaction and visualized using scanning electron microscopy. Supernatants of rinsed biofilms were used for metabolic activity analysis. In addition, human oral keratinocytes were exposed to rinsed biofilms to assess their inflammatory response. All outputs were analyzed for correlation using Spearman coefficient.
RESULTS
Product-related changes were observed in the rinsed biofilms. Three of the six tested mouth rinses could significantly prevent dysbiosis with ≥30% reduction in pathobiont abundance relative to the control. These biofilms had lower metabolic activity, and the exposed human oral keratinocyte produced less interleukin-8. Interleukin-8 production correlated to both pathobiont quantity and the metabolic activity of the biofilms.
CONCLUSION
Some mouth rinses could support biofilm resilience and stop dysbiosis evolution in the biofilm model, with a clear product-related effect. Such mouth rinses can be considered for patients under maintenance/supportive periodontal therapy to prevent/delay disease recurrence. Others are more useful for different periodontal therapy stages.
PubMed: 38946115
DOI: 10.1002/JPER.23-0674 -
Dental Materials Journal Jun 2024Laboratory evidence has shown that 45S5 bioglass can help in dental remineralization, so its incorporation into resin-modified glass ionomer cement (RMGIC) has been...
Laboratory evidence has shown that 45S5 bioglass can help in dental remineralization, so its incorporation into resin-modified glass ionomer cement (RMGIC) has been studied. This randomized clinical trial aimed to determine the efficacy of RMGIC enriched with 10% 45S5 bioglass (RMGIC/45S5) in preventing the progression of moderate caries lesions. Sixty-six permanent molars with moderate caries lesions, were randomly sealed with RMGIC or RMGIC/45S5. After 1, 3-6 months, patients' oral health, material behavior, and caries evolution were evaluated. Chi-square and Fisher's exact test was employed. After one month, the RMGIC showed higher total retention and better clinical performance compared to RMGIC/45S5, both showed a predominance of sealed teeth or without caries progression. After 6 months, no materials retention, quality and caries progression difference was observed for both materials. Short-term clinical follow-up reveals worse retention and quality of RMGIC/45S5, only after 6 months no clinical/microscopic differences are observed between the materials.
PubMed: 38945864
DOI: 10.4012/dmj.2023-261 -
Japanese Journal of Infectious Diseases Jun 2024Hand, foot and mouth disease (HFMD) was one of the most common infectious disease in the past few decades. After 2013, coxsackievirus A6 (CVA6) has replaced enterovirus...
Hand, foot and mouth disease (HFMD) was one of the most common infectious disease in the past few decades. After 2013, coxsackievirus A6 (CVA6) has replaced enterovirus 71 (EV-A71) and coxsackievirus A16 (CVA16), becoming the predominant pathogen responsible for HFMD in many areas in China. The objective of this study is to investigate the genetic characteristics and molecular epidemiology of CVA6 in Linyi from 2022 to 2023. A total of 965 HFMD cases were enrolled in this study and analyses based on VP1 nucleotide sequences were performed to determine the evolutionary trajectory of CVA6. In 2022, 281 (281/386, 72.8%) were positive for enterovirus (EVs), and 217 (217/281, 77.2%) were CVA6 positive. In 2023, 398 (398/579, 68.7%) samples were positive for EVs, and 243 (243/398, 61.1%) were CVA6 positive. Six sequences were selected from each year for the homology analysis. The results showed that 12 strains isolated in Linyi were far from the prototype strain (AY421764) and the first CVA6 strain reported in China (JQ364886). Phylogenetic analysis showed that the CVA6 strains isolated in Linyi all belonged to D3 subgenotype. CVA6 is emerging as a common pathogen causing HFMD in Linyi, and continuous surveillance of HFMD etiological agents is necessary.
PubMed: 38945859
DOI: 10.7883/yoken.JJID.2024.072 -
Biofouling Jun 2024This study investigated the antimicrobial activity of surface pre-reacted glass ionomer eluate (S-PRG) against oral microcosm biofilms collected from the oral cavity of...
This study investigated the antimicrobial activity of surface pre-reacted glass ionomer eluate (S-PRG) against oral microcosm biofilms collected from the oral cavity of patients. Dental biofilm samples were collected from three volunteers to form microcosm biofilms . Initially, screening tests were carried out to determine the biofilm treatment conditions with S-PRG eluate. The effects of a daily treatment for 5 min using three microcosm biofilms from different patients was then evaluated. For this, biofilms were formed on tooth enamel specimens for 120 h. Biofilms treated with 100% S-PRG for 5 min per day for 5 days showed a reduction in the number of total microorganisms, streptococci and streptococci. SEM images confirmed a reduction in the biofilm after treatment. Furthermore, S-PRG also reduced lactic acid production. It was concluded that S-PRG eluate reduced the microbial load and lactic acid production in oral microcosm biofilms, reinforcing its promising use as a mouthwash agent.
PubMed: 38945827
DOI: 10.1080/08927014.2024.2371817