-
Journal of Materials Chemistry. B Jun 2024Coating metal structures with a protective material is a popular strategy to prevent their deterioration due to corrosion. However, maintaining the barrier properties of...
Coating metal structures with a protective material is a popular strategy to prevent their deterioration due to corrosion. However, maintaining the barrier properties of coatings after their mechanical damage is challenging. Herein, we prepared multifunctional coatings with self-healing ability to conserve their anticorrosion performance after damage. The coating was formed by blending synthesized redox-responsive copolymers with the ability to release a corrosion inhibitor upon the onset of corrosion with synthesized self-healing polyurethanes containing disulfide bonds. The corrosion rate of steel substrates coated with a blend is approximately 24 times lower than that of steel coated with only self-healing polyurethane. An exceptional healing efficiency, as high as 95%, is obtained after mechanical damage. The antibiofouling property against bacterial and microalgal attachments on coatings is facilitated by the repellent characteristic of fluorinated segments and the biocidal activity of the inhibitor moieties in the copolymer.
PubMed: 38904191
DOI: 10.1039/d4tb00736k -
Journal of Otolaryngology - Head & Neck... 2024Minimally invasive cochlear implant surgery by using a microstereotactic frame demands solid connection to the bone. We aimed to determine the stability of commercially...
BACKGROUND
Minimally invasive cochlear implant surgery by using a microstereotactic frame demands solid connection to the bone. We aimed to determine the stability of commercially available orthodontic miniscrews to evaluate their feasibility for frame's fixation. In addition, which substitute material most closely resembles the mechanical properties of the human temporal bone was evaluated.
METHODS
Pull-out tests were carried out with five different types of orthodontic miniscrews in human temporal bone specimens. Furthermore, short fiber filled epoxy (SFFE), solid rigid polyurethane (SRPU50), bovine femur, and porcine iliac bone were evaluated as substitute materials. In total, 57 tests in human specimens and 180 tests in the substitute materials were performed.
RESULTS
In human temporal bone, average pull-out forces ranged from 220 N to 285 N between screws. Joint stiffness in human temporal bone ranged between 14 N/mm and 358 N/mm. Statistically significant differences between the tested screws were measured in terms of stiffness and elastic energy. One screw type failed insertion due to tip breakage. No significant differences occurred between screws in maximum pull-out force. The average pull-out values of SFFE were 14.1 N higher compared to human specimen.
CONCLUSION
Orthodontic miniscrews provided rigid fixation when partially inserted in human temporal bone, as evidenced by pull-out forces and joint stiffness. Average values exceeded requirements despite variations between screws. Differences in stiffness and elastic energy indicate screw-specific interface mechanics. With proper insertion, orthodontic miniscrews appear suitable for microstereotactic frame anchoring during minimally invasive cochlear implant surgery. However, testing under more complex loading is needed to better predict clinical performance. For further pull-out tests, the most suitable substitute material is SFFE.
Topics: Temporal Bone; Humans; Bone Screws; Animals; Swine; Cochlear Implantation; Materials Testing; Cadaver; Cattle; Minimally Invasive Surgical Procedures
PubMed: 38903014
DOI: 10.1177/19160216241248669 -
Scientific Reports Jun 2024Absorption methods using polyurethane foams (PUFs) have recently gained popularity in treating oil spills. However, conventional petroleum-based PUFs lack selectivity...
Absorption methods using polyurethane foams (PUFs) have recently gained popularity in treating oil spills. However, conventional petroleum-based PUFs lack selectivity and are commonly surface-modified using complicated processes that require toxic and harmful solvents to enhance their hydrophobicity and oil sorption capacities. In this paper, a novel naturally superoleophilic foam with inherent hydrophobic properties has been developed through the conventional one-shot foaming method with the integration of coconut oil-based polyol. This bio-based polyol was explicitly handpicked as it is chiefly saturated, highly abundant, and inexpensive. The foam is characterized by an oil sorption capacity range of 14.89-24.65 g g for different types of oil, equivalent to 578-871 times its weight. Its hydrophobic behavior is expressed through a water contact angle of ~ 139°. The foam also showcased excellent chemical stability and high recyclability without a significant loss in absorption capacity after 20 cycles. The incorporation of the coconut oil-based polyol is also shown to improve the morphological, mechanical, and thermal behavior of the foam. It can be inferred from these findings that this novel material holds great potential for revolutionizing sorbents, pioneering a more sustainable and eco-friendly functional material produced via a facile method.
PubMed: 38902271
DOI: 10.1038/s41598-024-64178-2 -
Biomedical Materials (Bristol, England) Jun 2024Nowadays, medical polyurethanes with favorable and durable antibacterial properties received more attention, because of avoiding repeated replacement of interventional...
Nowadays, medical polyurethanes with favorable and durable antibacterial properties received more attention, because of avoiding repeated replacement of interventional materials and reducing patients' pain. In this thesis, non-soluble antibacterial polyurethane (NAPU) based on cation antibacterial mechanism was prepared by photo-grafting chitosan azide and heparin azide into polyurethane (PU). -NHof chitosan azide absorbed bacteria, inhibiting and breaking their mobility and structures. Heparin azide prevented cations from penetrating bacteria's membranes and inhibited their growth. The results showed that chitosan azide and heparin azide were successfully grafted into PU. The highest antibacterial rate was 92.07%, cytotoxicity grade ranging from 0-1 (RGR standard) and water contact angle exhibiting 60°, attributing to cation antibacterial effect and -OH existing. Tensile strength was up to 23.91 MPa and was suitable for using as medical materials. NAPU with long-lasting coating both possessed antibacterial properties and persistence, which can solve the problem of medical catheters' long-term using.
Topics: Polyurethanes; Chitosan; Anti-Bacterial Agents; Heparin; Azides; Cations; Materials Testing; Tensile Strength; Escherichia coli; Biocompatible Materials; Animals; Humans; Microbial Sensitivity Tests; Staphylococcus aureus; Mice; Solubility
PubMed: 38901421
DOI: 10.1088/1748-605X/ad5a5c -
ACS Applied Materials & Interfaces Jun 2024Inspired by the crucial role of matrix vesicles (MVs), a series of biomimetic vesicles (BVs) fabricated by calcium glycerophosphate (CaGP) modified polyurethane were...
Inspired by the crucial role of matrix vesicles (MVs), a series of biomimetic vesicles (BVs) fabricated by calcium glycerophosphate (CaGP) modified polyurethane were designed to mediate the mineralization through enzyme activation for bone therapy. In this study, alkaline phosphatase (ALP) was harbored in the porous BVs by adsorption (Ad-BVs) or entrapment (En-BVs). High encapsulation of ALP on En-BVs was effectively self-activating by calcium ions of CaGP-modified PU that specifically hydrolyzed the organophosphorus (CaGP) to inorganic phosphate, thus promoting the formation of the highly oriented bone-like apatite . Enzyme-catalyzed kinetics confirms the regulation of apatite crystallization by the synergistic action of self-activated ALP and the confined microcompartments of BVs. This leads to a supersaturated microenvironment, with the En-BVs group exhibiting inorganic phosphate (Pi) levels 4.19 times higher and Ca levels 3.67 times higher than those of simulated body fluid (SBF). Of note, the En-BVs group exhibited excellent osteo-inducing differentiation of BMSCs and the highest maturity with reduced bone loss in rat femoral defect . This innovative strategy of biomimetic vesicles is expected to provide valuable insights into the enzyme-activated field of bone therapy.
PubMed: 38900067
DOI: 10.1021/acsami.4c03978 -
Science Translational Medicine Jun 2024Current clinically used electronic implants, including cardiac pacing leads for epicardial monitoring and stimulation of the heart, rely on surgical suturing or direct...
Current clinically used electronic implants, including cardiac pacing leads for epicardial monitoring and stimulation of the heart, rely on surgical suturing or direct insertion of electrodes to the heart tissue. These approaches can cause tissue trauma during the implantation and retrieval of the pacing leads, with the potential for bleeding, tissue damage, and device failure. Here, we report a bioadhesive pacing lead that can directly interface with cardiac tissue through physical and covalent interactions to support minimally invasive adhesive implantation and gentle on-demand removal of the device with a detachment solution. We developed 3D-printable bioadhesive materials for customized fabrication of the device by graft-polymerizing polyacrylic acid on hydrophilic polyurethane and mixing with poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) to obtain electrical conductivity. The bioadhesive construct exhibited mechanical properties similar to cardiac tissue and strong tissue adhesion, supporting stable electrical interfacing. Infusion of a detachment solution to cleave physical and covalent cross-links between the adhesive interface and the tissue allowed retrieval of the bioadhesive pacing leads in rat and porcine models without apparent tissue damage. Continuous and reliable cardiac monitoring and pacing of rodent and porcine hearts were demonstrated for 2 weeks with consistent capture threshold and sensing amplitude, in contrast to a commercially available alternative. Pacing and continuous telemetric monitoring were achieved in a porcine model. These findings may offer a promising platform for adhesive bioelectronic devices for cardiac monitoring and treatment.
Topics: Animals; Swine; Rats; Monitoring, Physiologic; Pacemaker, Artificial; Rats, Sprague-Dawley; Electrodes, Implanted; Adhesives; Printing, Three-Dimensional; Models, Animal
PubMed: 38896601
DOI: 10.1126/scitranslmed.ado9003 -
RSC Advances Jun 2024Polymer foams can have heterogeneous and complex internal structures, especially when material blends or particles have been integrated to create composites. It becomes...
Polymer foams can have heterogeneous and complex internal structures, especially when material blends or particles have been integrated to create composites. It becomes even more challenging to probe and understand foam structure/properties when using non-uniform particles, such as biobased fillers. Optical or SEM imaging can only provide limited information as these are two-dimensional (2D) surface techniques. In this study, 3D X-ray tomography was applied to comprehensively analyze the structural features of biobased polyurethane foams containing porous rice hull fillers. The in-depth characterization at a wide range of length scale enabled us to quantify and obtain statistics of the unique trends in foam pore size and pore orientation corresponding to rice hull particle fraction and particle size. Rice hull particles were found to induce smaller cell formation. In addition, these biobased particles influenced cell expansion and caused cells to have less consistent orientation. Furthermore, after foam samples were subjected to cyclic compressive loading, X-ray tomography showed fractures in large (>100 μm) particles. This helps reveal the premature failing mechanism of composite foams with highly porous and coarse particles. The study elucidates novel microstructural evolution and deformation mechanisms using 3D X-ray tomography. The results offer new insights on internal structures for biobased composites and foams that are not previously possible through the conventional characterization tools.
PubMed: 38895520
DOI: 10.1039/d4ra02461c -
Materials (Basel, Switzerland) Jun 2024Polyurethane polishing pads are important in chemical mechanical polishing (CMP). Thus, understanding how to decrease the density but increase the porosity is a crucial...
Polyurethane polishing pads are important in chemical mechanical polishing (CMP). Thus, understanding how to decrease the density but increase the porosity is a crucial aspect of improving the efficiency of a polyurethane polishing pad. According to the principle of gas generation by thermal decomposition of sodium bicarbonate and ammonium bicarbonate, polyurethane polishing pad was prepared by a secondary foaming method. The influence of adding such an inorganic foaming agent as an auxiliary foaming agent on the structure, physical properties, and mechanical properties of polyurethane polishing pads was discussed. The results showed that compared with the polyurethane polishing pad without an inorganic foaming agent, the open-pore structure increased, the density decreased, and the porosity and water absorption increased significantly. The highest porosity and material removal rate (MRR) with sodium bicarbonate added was 3.3% higher than those without sodium bicarbonate and 33.8% higher than those without sodium bicarbonate. In addition, the highest porosity and MRR with ammonium bicarbonate were 7.2% higher and 47.8% higher than those without ammonium bicarbonate. Therefore, it was finally concluded that the optimum amount of sodium bicarbonate to be added was 3 wt%, and the optimum amount of ammonium bicarbonate to be added was 1 wt%.
PubMed: 38894023
DOI: 10.3390/ma17112759 -
Materials (Basel, Switzerland) Jun 2024Additive manufacturing (AM) is often used to create designs inspired by topology optimization and biological structures, yielding unique cross-sectional geometries...
Additive manufacturing (AM) is often used to create designs inspired by topology optimization and biological structures, yielding unique cross-sectional geometries spanning across scales. However, manufacturing defects intrinsic to AM can affect material properties, limiting the applicability of a uniform material model across diverse cross-sections. To examine this phenomenon, this paper explores the influence of specimen size and layer height on the compressive modulus of polycarbonate (PC) and thermoplastic polyurethane (TPU) specimens fabricated using fused filament fabrication (FFF). Micro-computed tomography imaging and compression testing were conducted on the printed samples. The results indicate that while variations in the modulus were statistically significant due to both layer height and size of the specimen in TPU, variations in PC were only statistically significant due to layer height. The highest elastic modulus was observed at a 0.2 mm layer height for both materials across different sizes. These findings offer valuable insights into design components for FFF, emphasizing the importance of considering mechanical property variations due to feature size, especially in TPU. Furthermore, locations with a higher probability of failure are recommended to be printed closer to the print bed, especially for TPU, because of the lower void volume fraction observed near the heated print bed.
PubMed: 38893943
DOI: 10.3390/ma17112677 -
Materials (Basel, Switzerland) Jun 2024Protection against fire and the corrosion of metals is necessary to ensure human safety. Most of the fire and corrosion inhibitors do not meet the ecological...
Hexakis[p-(hydroxymethyl)phenoxy]cyclotriphosphazene as an Environmentally Friendly Modifier for Polyurethane Powder Coatings with Increased Thermal Stability and Corrosion Resistance.
Protection against fire and the corrosion of metals is necessary to ensure human safety. Most of the fire and corrosion inhibitors do not meet the ecological requirements. Therefore, effective and ecological methods of protecting metals are currently a challenge for researchers. In this work, the influence of hexakis(4-(hydroxymethyl)phenoxy)cyclotriphosphazene (HHPCP) on the characteristics of powder coatings was examined. The coatings' properties were investigated by measuring the roughness, hardness, adhesion to the steel surface, cupping, gloss, scratch resistance, and water contact angle. The thermal stability was studied by furnace test and TGA analysis. The corrosion resistance test was carried out in a 3.5% NaCl solution. The distribution of phosphazene-derived segments in the coating was examined by GD-EOS analysis. Modified coatings show better corrosion and thermal resistance and can be used for the protection of the steel surface. Their better corrosion resistance is due to the electroactive properties of the phosphazene ring and its higher concentration at the coating surface, confirmed by GD-EOS analysis. The increase in thermal resistance is due to the effect of the formation of phosphoric metaphosphoric and polyphosphoric acids during the decomposition of HHCPC, which remain in the condensed char phase and play a crucial role in surface protection.
PubMed: 38893936
DOI: 10.3390/ma17112672