-
Journal of Clinical Medicine Jun 2024: The improvement of oral-health-related quality of life (OHRQoL) with different types of prosthesis for completely edentulous jaws in the elderly population is a... (Review)
Review
: The improvement of oral-health-related quality of life (OHRQoL) with different types of prosthesis for completely edentulous jaws in the elderly population is a critical factor in clinical decision making for these vulnerable patients. This review aims to evaluate the changes in OHRQoL after treatment with different types of full-arch prostheses in the elderly edentulous population to determine the prostheses that result in the greatest improvement in OHRQoL. : Clinical studies of different types of full-arch prostheses that measured the OHRQoL in edentulous patients 60 years or older were searched for in the PubMed, Embase and Scopus electronic databases, with additional hand searching to summarize the outcomes of the selected studies. : Among the 302 identified studies, 10 studies were selected. A total of 504 patients wearing 133 complete dentures, 372 implant overdentures and 39 fixed prostheses were assessed among the selected studies. The overall OHIP and GOHAI scores were evaluated at baseline and in the 3rd, 6th, 12th and 18th months of treatment with the respective prostheses. The improved OHRQoL with overall OHIP scores associated with conventional dentures were 9.21-12.5% from the 3rd month to 1 year after treatment, whereas those associated with implant overdentures and full-arch fixed prosthesis were 9-25.26% at 1 year and 18.53-26.79 at the 18th-month follow-up, respectively. The increased overall GOHAI scores were 21.3-25.43% for conventional dentures, 36.82-41.32% for implant overdentures and 39.48-42.83% for full-arch fixed prosthesis from the 3rd month to the 6th-month follow-up. : In general, the improvement in OHRQoL after rehabilitation with implant overdentures declined at one year, and that with full-arch fixed prosthesis declined at the 18th-month follow-up; meanwhile, the OHRQoL associated with conventional dentures improved stably up to one year, but the implant-supported prostheses resulted in an obviously greater improvement in the OHRQoL than that obtained with conventional dentures. However, studies with longer follow-up periods are still required to evaluate the long-term clinical effectiveness.
PubMed: 38929921
DOI: 10.3390/jcm13123391 -
Medical Science Monitor : International... Jun 2024Prosthodontics is a dental subspecialty that includes the preparation of dental prosthetics for missing or damaged teeth. It increasingly uses computer-assisted... (Review)
Review
Prosthodontics is a dental subspecialty that includes the preparation of dental prosthetics for missing or damaged teeth. It increasingly uses computer-assisted technologies for planning and preparing dental prosthetics. This study aims to present the findings from a systematic review of publications on artificial intelligence (AI) in prosthodontics to identify current trends and future opportunities. The review question was "What are the applications of AI in prosthodontics and how good is their performance in prosthodontics?" Electronic searching in the Web of Science, ScienceDirect, PubMed, and Cochrane Library was conducted. The search was limited to full text from January 2012 to January 2024. Quadas-2 was used for assessing quality and potential risk of bias for the selected studies. A total of 1925 studies were identified in the initial search. After removing the duplicates and applying exclusion criteria, a total of 30 studies were selected for this review. Results of the Quadas-2 assessment of included studies found that a total of 18.3% of studies were identified as low risk of bias studies, whereas 52.6% and 28.9% of included studies were identified as studies with high and unclear risk of bias, respectively. Although they are still developing, AI models have already shown promise in the areas of dental charting, tooth shade selection, automated restoration design, mapping the preparation finishing line, manufacturing casting optimization, predicting facial changes in patients wearing removable prostheses, and designing removable partial dentures.
Topics: Artificial Intelligence; Humans; Prosthodontics; Dental Prosthesis
PubMed: 38840416
DOI: 10.12659/MSM.944310 -
Frontiers in Oral Health 2024Digital denture fabrication became an alternative method to conventional denture fabrication. However reviewing the antimicrobial performance of newly introduced digital...
OBJECTIVES
Digital denture fabrication became an alternative method to conventional denture fabrication. However reviewing the antimicrobial performance of newly introduced digital fabrication methods in comparison to the conventional method is neglected. Aim of study: this review was to compare the antiadherence properties of various CAD-CAM subtractive (milled), additive (3D printed) conventional denture base resins. In order to answer the developed PICO question: "Does CAD-CAM milled and 3D printed denture base resins have microbiological antiadherence properties over the conventional ones?" We included comparative studies on digitally fabricated Denture base resins with conventionally fabricated one in term of microbial adhesion.
METHODS
All studies investigated the microbial adherence to CAD-CAM milled and 3D printed denture base resins in comparison to conventional were searched in the PubMed, Web of Sciences, and Scopus databases up to December 2023.
RESULTS
Fifteen studies have been investigated the microbial adhesion to milled and 3D printed denture base resins. CAD-CAM milled resins significantly decreased the microbial adhesion when compared with the conventional resins and 3D printed resins, while the later showed a high tendency for microbial adhesion. The addition of antifungal agents to 3D printed resins significantly reduced adhesion. In terms of 3D printing parameters, printing orientation affected adherence while printing technology had no effect on microbial adhesion.
CONCLUSION
Denture base materials and fabrication methods significantly affect the microbial adhesion. CAD-CAM milled denture base resins demonstrated low microbial adhesion. 3D-printed resins showed high tendency for adhesion. The antiadherent properties of 3D-printed resins can be improved by incorporating antifungal agents or changing the printing parameters, but further investigations are required to validate these modifications.
PubMed: 38817845
DOI: 10.3389/froh.2024.1375186 -
Journal of Fungi (Basel, Switzerland) Apr 2024Denture stomatitis (DS) is a very common disease in wearers of removable complete and partial dentures with a worldwide prevalence in the range of 20-67%. Both... (Review)
Review
Denture stomatitis (DS) is a very common disease in wearers of removable complete and partial dentures with a worldwide prevalence in the range of 20-67%. Both industrially developed and impoverished nations are affected by the illness. DS is often associated with ill-fitting dentures or a fungal infection with spp. is normally found in the oral cavity microbiota, but it can be harmful to the health of elderly people with underlying diseases. Therefore, the purpose of the present study is to offer the most recent information about the epidemiology, etiology, and global distribution of species associated with DS through a systematic review. Several databases, including Medline, Web of Science, and Scopus, were used to conduct an extensive search of the literature published in the previous 20 years. The selection of studies was performed by two authors. The extracted data were as follows: author, year of publication, country, sample, frequency of DS, method of diagnosing stomatitis, species of , risk factors, and etiology of the disease. The JBI Critical appraisal tools were used to assess the quality of the studies. Eventually, twenty-eight studies were included in the systematic review. Twenty-one studies investigated DS, while seven studies examined colonization in patients using removable dentures. The results show that the main causes of DS include the type of dentures, continuous wearing of dentures, and the formation of a biofilm, which is facilitated by poor dental hygiene. Additionally, previous studies have pinpointed the significance of the salivary flow, saliva composition, and salivary pH. The findings of the current review indicate that it is crucial to monitor denture wearers for the appearance of DS, especially the patients whose immunity has been impaired due to a systemic condition. Finally, frequent follow-ups should include a clinical examination and microbial swabs of the palatal mucosa and the mucosal surface of the denture.
PubMed: 38786683
DOI: 10.3390/jof10050328 -
BDJ Open May 2024To determine the patient-oriented outcomes after complete denture (CD) treatment using neutral zone (NZ) techniques compared with those of conventional dentures. (Review)
Review
OBJECTIVES
To determine the patient-oriented outcomes after complete denture (CD) treatment using neutral zone (NZ) techniques compared with those of conventional dentures.
MATERIALS AND METHODS
Electronic and hand searches were conducted up to December 2023 based on PICOS criteria. Population (P) was patients with complete edentulism on maxillary and mandibular arches and were either or not wearing CDs. Intervention (I) focused on the fabrication of mandibular and/or maxillary CD using NZ techniques. Comparators (C) included other CD fabrication approaches, such as conventional and simplified techniques, and the use of old or existing CDs. Outcomes (O) were patient-oriented treatment outcomes. Study design (S) included human studies.
RESULTS
Eleven human experimental studies were included. NZ dentures demonstrated better patient-reported outcomes, by providing greater comfort, enhancing denture stability and retention, reducing food traps underneath the denture, as well as improving appearance, chewing efficiency and speech. Objective findings varied, with most studies showing equivalent outcomes for NZ and conventional dentures. However, one study indicated superior, and another demonstrated worse outcomes for NZ dentures.
CONCLUSIONS
NZ dentures generally improve patient-reported outcomes more than conventional dentures. However, their impact on objective outcomes compared with a conventional denture remains uncertain.
PubMed: 38782934
DOI: 10.1038/s41405-024-00222-7 -
Journal of Applied Biomaterials &... 2024Despite the development of implant-supported prostheses, there are still patients for whom conservative treatments such as resin-bonded fixed dental prostheses (RBFDPs)... (Review)
Review
Despite the development of implant-supported prostheses, there are still patients for whom conservative treatments such as resin-bonded fixed dental prostheses (RBFDPs) are more appropriate. This study's objective was to analyze the available research on full-ceramic RBFDPs. In this study, Web of Science, MEDLINE/PubMed, Scopus, Embase, Cochrane Library, and Google Scholar databases were searched for articles published in English between 2010 and 2020. A total of 14 studies were reviewed based on the eligibility criteria. The results showed that using a cantilever design with one abutment had an advantage over two abutments. Additionally, it was proposed that preparations designed with retentive aids, such as a proximal box, groove, and pinhole, could improve RBFDP survival rates. IPS e.max ZirCAD, In-Ceram alumina, and zirconia CAD/CAM were the most commonly used framework materials. Most studies used air abrasion, salinization, or hydrofluoric acid for surface treatment. Adhesive resin cements were the most frequently used type of cement. The survival rate of In-Ceram ceramics (85.3%-94.8%) was lower than that of In-Ceram zirconia and IPS e.max ZirCAD. Debonding, followed by framework fracture, was the leading cause of failure. Following 3-10 years follow-up, the survival percentage of all-ceramic RBFDPs ranged from 76% to 100%. Although RBFDPs have demonstrated satisfactory success as a conservative treatment, long-term follow-ups and higher sample sizes in clinical research are required to gain more reliable outcomes on the clinical success rate of various RBFDP designs.
Topics: Humans; Ceramics; Resin Cements; Dental Porcelain; Dental Prosthesis, Implant-Supported; Denture, Partial, Fixed, Resin-Bonded; Zirconium
PubMed: 38706266
DOI: 10.1177/22808000241250118 -
Photodiagnosis and Photodynamic Therapy Apr 2024The aim was to systematically review clinical studies that investigated the efficacy of antimicrobial photodynamic therapy (aPDT) in reducing oral yeasts growth (OYG) in... (Review)
Review
OBJECTIVE
The aim was to systematically review clinical studies that investigated the efficacy of antimicrobial photodynamic therapy (aPDT) in reducing oral yeasts growth (OYG) in individuals wearing implant overdentures (IO).
METHODS
The focused question was "Is aPDT effective in reducing OYG in patients wearing IO?" Literature search was performed in accordance with PRISMA guidelines. Indexed databases were searched without time and language restrictions up to and including January 2024. Clinical studies were included; and letters to the Editor, case-reports/case-series, perspectives/commentaries, in-vitro/ex-vivo studies, studies on animal models and expert opinions were excluded. The risk of bias was also assessed.
RESULTS
Two clinical studies were included and processed for data extraction. The study population comprised of 100 (mean age: 58.5 years) and 53 (mean age: 58.5 years) individuals. The numbers of males and females included in these studies ranged between 33 and 35 males and 18-67 females, respectively. In both studies, follow-up evaluations were performed after 60 days. In both studies, aPDT was performed using a 660 nm diode laser at a power of 100 mW and using methylene-blue as photosensitizer. Results from both studies showed that aPDT is effective in significantly reducing oral yeasts CFU/ml and improvement of OHRQoL of individuals using IO.
CONCLUSION
The aPDT is useful in reducing OYG on IO; however, further well-designed and power-adjusted studies are needed in this area of research.
Topics: Photochemotherapy; Humans; Photosensitizing Agents; Denture, Overlay; Methylene Blue; Lasers, Semiconductor; Yeasts; Clinical Trials as Topic
PubMed: 38548040
DOI: 10.1016/j.pdpdt.2024.104050 -
Diagnostics (Basel, Switzerland) Mar 2024A common application for intraoral scanners is the digitization of the morphology of teeth and palatal rugae. Palatal scans are most commonly required to fabricate... (Review)
Review
A common application for intraoral scanners is the digitization of the morphology of teeth and palatal rugae. Palatal scans are most commonly required to fabricate complete dentures and immediate transitional dentures and serve as a reference point for assessing orthodontic results. However, they are also frequently included by accident, even though the main purpose of intraoral scanning is to reconstruct dentition using computer-aided manufacturing (CAM). The literature shows that the identification of disaster victims has frequently involved palatal rugae impressions. As the skull provides sound insulation, the rugae are resistant to heat, chemicals, and stress. Antemortem data might be difficult to find during a forensic inquiry, particularly in disaster victim identification cases. In contrast with DNA and fingerprints, there is a greater likelihood of having a dental record that contains palatal scans. With specialized software, the scans can be exported as open stereolithography (STL) files. Considering that a full case consumes up to about 100 MB of hard drive space, long-term storage should not be an issue compared to a plaster model. Additionally, dentists widely use online databases to exchange data for smile design, implant registration, and orthodontic purposes. This will produce a digital database that grows quickly and is readily usable for forensic investigations. The uniqueness of forensic features is frequently challenged; however, palatal morphology's unique trait could make it possible as it is characteristic of individuals as well as the most distinguishing factor. This review will highlight how rugae, palatal morphology, mirroring, superimposition, and geometrics can serve in forensic identification.
PubMed: 38473003
DOI: 10.3390/diagnostics14050531 -
BMC Oral Health Mar 2024The present systematic review and meta-analysis investigated the available evidence about the adherence of Candida Albicans to the digitally-fabricated acrylic resins... (Meta-Analysis)
Meta-Analysis
BACKGROUND
The present systematic review and meta-analysis investigated the available evidence about the adherence of Candida Albicans to the digitally-fabricated acrylic resins (both milled and 3D-printed) compared to the conventional heat-polymerized acrylic resins.
METHODS
This study followed the guidelines of the Preferred Reporting Items for Systematic Review and Meta-analyses (PRISMA). A comprehensive search of online databases/search tools (Web of Science, Scopus, PubMed, Ovid, and Google Scholar) was conducted for all relevant studies published up until May 29, 2023. Only in-vitro studies comparing the adherence of Candida albicans to the digital and conventional acrylic resins were included. The quantitative analyses were performed using RevMan v5.3 software.
RESULTS
Fourteen studies were included, 11 of which were meta-analyzed based on Colony Forming Unit (CFU) and Optical Density (OD) outcome measures. The pooled data revealed significantly lower candida colonization on the milled digitally-fabricated compared to the heat-polymerized conventionally-fabricated acrylic resin materials (MD = - 0.36; 95%CI = - 0.69, - 0.03; P = 0.03 and MD = - 0.04; 95%CI = - 0.06, - 0.01; P = 0.0008; as measured by CFU and OD respectively). However, no differences were found in the adhesion of Candida albicans between the 3D-printed digitally-fabricated compared to the heat-polymerized conventionally-fabricated acrylic resin materials (CFU: P = 0.11, and OD: P = 0.20).
CONCLUSION
The available evidence suggests that candida is less likely to adhere to the milled digitally-fabricated acrylic resins compared to the conventional ones.
Topics: Acrylic Resins; Candida albicans; Databases, Factual
PubMed: 38439020
DOI: 10.1186/s12903-024-04083-2 -
Photodiagnosis and Photodynamic Therapy Apr 2024Orthodontic acrylic resins containing antimicrobial photocatalytic nanoparticles aims to reduce oral lesions including denture stomatitis and white spot lesions but they... (Meta-Analysis)
Meta-Analysis Review
BACKGROUND/PURPOSE
Orthodontic acrylic resins containing antimicrobial photocatalytic nanoparticles aims to reduce oral lesions including denture stomatitis and white spot lesions but they should not imperil its mechanical properties. This systematic review was done to evaluate the effect of various photocatalytic nanoparticles on the flexural strength (FS) of acrylic resins.
MATERIALS AND METHODS
We systematically searched the PubMed/Medline, Cochrane Library, and Scopus databases from January 2018 to October 2023. The review was conducted according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines, and the quality of the studies was evaluated using the QUIN tool, which is specifically designed to assess the risk of bias in vitro studies.
RESULTS
Following screening of 1016 initial records, 23 studies were deemed eligible for inclusion. The addition of photocatalytic nanoparticles, such as emodin (Emo), curcumin (Cur), Cur nisin (CurNis), zeolite/zinc oxide (Zeo/ZnO), and Ulva lactuca (U. lactuca), to acrylic resins resulted in a reduction in FS, with the extent of reduction dependent on the nanoparticle concentration. Specifically, the addition of Emo (≥0.5 %), Cur (≥0.5 %), CurNis (≥5 %), Zeo/ZnO (≥2), and U. lactuca (≥1 %) to acrylic resins significantly decreased FS. Conversely, the inclusion of ZnO and titanium dioxide (TiO) in acrylic resins improved FS, but higher concentrations (≥5 % for TiO) had a limited positive effect.
CONCLUSION
Our study supports the use of low concentrations of photocatalytic nanoparticles, such as ZnO (≤2 %), TiO (≤3 %), Emo (≤0.5 %), Cur (≤0.5 %), CurNis (≤5 %), and U. lactuca (≤1 %), in orthodontic acrylic resins without compromising FS.
Topics: Acrylic Resins; Nanoparticles; Flexural Strength; Anti-Infective Agents; Photochemotherapy; Humans
PubMed: 38401821
DOI: 10.1016/j.pdpdt.2024.104021