-
Journal of Clinical Medicine Jun 2024: The improvement of oral-health-related quality of life (OHRQoL) with different types of prosthesis for completely edentulous jaws in the elderly population is a... (Review)
Review
: The improvement of oral-health-related quality of life (OHRQoL) with different types of prosthesis for completely edentulous jaws in the elderly population is a critical factor in clinical decision making for these vulnerable patients. This review aims to evaluate the changes in OHRQoL after treatment with different types of full-arch prostheses in the elderly edentulous population to determine the prostheses that result in the greatest improvement in OHRQoL. : Clinical studies of different types of full-arch prostheses that measured the OHRQoL in edentulous patients 60 years or older were searched for in the PubMed, Embase and Scopus electronic databases, with additional hand searching to summarize the outcomes of the selected studies. : Among the 302 identified studies, 10 studies were selected. A total of 504 patients wearing 133 complete dentures, 372 implant overdentures and 39 fixed prostheses were assessed among the selected studies. The overall OHIP and GOHAI scores were evaluated at baseline and in the 3rd, 6th, 12th and 18th months of treatment with the respective prostheses. The improved OHRQoL with overall OHIP scores associated with conventional dentures were 9.21-12.5% from the 3rd month to 1 year after treatment, whereas those associated with implant overdentures and full-arch fixed prosthesis were 9-25.26% at 1 year and 18.53-26.79 at the 18th-month follow-up, respectively. The increased overall GOHAI scores were 21.3-25.43% for conventional dentures, 36.82-41.32% for implant overdentures and 39.48-42.83% for full-arch fixed prosthesis from the 3rd month to the 6th-month follow-up. : In general, the improvement in OHRQoL after rehabilitation with implant overdentures declined at one year, and that with full-arch fixed prosthesis declined at the 18th-month follow-up; meanwhile, the OHRQoL associated with conventional dentures improved stably up to one year, but the implant-supported prostheses resulted in an obviously greater improvement in the OHRQoL than that obtained with conventional dentures. However, studies with longer follow-up periods are still required to evaluate the long-term clinical effectiveness.
PubMed: 38929921
DOI: 10.3390/jcm13123391 -
Journal of Functional Biomaterials May 2024Computer-aided design and computer-aided manufacturing (CAD/CAM) techniques are based on either subtractive (milling prefabricated blocks) or additive (3D printing)...
Computer-aided design and computer-aided manufacturing (CAD/CAM) techniques are based on either subtractive (milling prefabricated blocks) or additive (3D printing) methods, and both are used for obtaining dentistry materials. Our in vitro study aimed to investigate the behavior of human gingival fibroblasts exposed to methacrylate (MA)-based CAD/CAM milled samples in comparison with that of MA-based 3D-printed samples to better elucidate the mechanisms of cell adaptability and survival. The proliferation of human gingival fibroblasts was measured after 2 and 24 h of incubation in the presence of these samples using a 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay, and the membrane integrity was assessed through the lactate dehydrogenase release. The level of reactive oxygen species, expression of autophagy-related protein LC3B-I, and detection of GSH and caspase 3/7 were evaluated by fluorescence staining. The MMP-2 levels were measured using a Milliplex MAP kit. The incubation with MA-based 3D-printed samples significantly reduced the viability, by 16% and 28% from control after 2 and 24 h, respectively. There was a 25% and 55% decrease in the GSH level from control after 24 h of incubation with the CAD/CAM milled and 3D-printed samples, respectively. In addition, higher levels of LC3B-I and MMP-2 were obtained after 24 h of incubation with the MA-based 3D samples compared to the CAD/CAM milled ones. Therefore, our results outline that the MA-CAD/CAM milled samples displayed good biocompatibility during 24-h exposure, while MA-3D resins are proper for short-term utilization (less than 24 h).
PubMed: 38921521
DOI: 10.3390/jfb15060147 -
Healthcare (Basel, Switzerland) Jun 2024This research addresses a gap in the literature by conducting a comprehensive analysis of patients' level of satisfaction with dental care.
UNLABELLED
This research addresses a gap in the literature by conducting a comprehensive analysis of patients' level of satisfaction with dental care.
METHODS
By combining quantitative and qualitative survey methods with a PSQ, this study aims to augment ongoing initiatives to enhance dental patients' experiences by painting a more comprehensive depiction of patients' level of satisfaction.
RESULTS
When asked about their overall level of satisfaction 77.1% of the patients said that they received excellent services from office personnel and 72.2% said they trust their doctors.
CONCLUSIONS
Assessing patient satisfaction in the realm of dental service quality is crucial for enhancing service quality and accuracy, which would benefit both patients and dentists and, ultimately, improve public health.
PubMed: 38921309
DOI: 10.3390/healthcare12121195 -
European Journal of Investigation in... Jun 2024Multimedia resources, such as instructional videos, are currently enjoying a certain popularity in the training programs for medical and dental students. The major...
UNLABELLED
Multimedia resources, such as instructional videos, are currently enjoying a certain popularity in the training programs for medical and dental students. The major challenge is to create such resources with quality content that is approved by students. In order to answer this challenge, it is imperative to find out which features of instructional videos are considered to be necessary and useful by students, thus being able to excite them, to hold their attention, and to stimulate them in learning with pleasure.
AIM
We investigated the opinions of a sample of 551 students from four medical universities in Romania, in order to identify the students' preferred characteristics in instructional videos, both globally and comparatively on genders and age groups and also according to their general preferences for using internet services.
MATERIAL AND METHODS
We used univariate (hypothesis testing) and multivariate (two-step clustering) data analysis techniques and revealed three clusters of students, primarily determined by their perceptions of the visual appearance of the instructional videos.
RESULTS
The structure of the clusters by gender and age group was relatively similar, but we recorded differences associated with the students' expressed preferences for certain internet services compared to others. The first identified cluster (35.4% of the cases) contains students who prefer instructional videos to contain images used only for aesthetic purposes and to fill the gaps; they use internet services mainly for communication. The second cluster of students (34.8%) prefers videos designed as practical lessons, using explanatory drawings and diagrams drawn at the same time as the explanations; they also use internet services mainly for communication. The last cluster of students (29.8%) prefer videos designed as PowerPoint presentations, with animated pictures, diagrams, and drawings; they are slightly younger than the others and use internet services mainly for information and communication, but also for domestic facilities.
CONCLUSIONS
The students' preferences for certain features of instructional videos depend not only on gender and age but are also related to their developmental background and general opinions about modern technologies.
PubMed: 38921074
DOI: 10.3390/ejihpe14060108 -
Dentistry Journal May 2024Laser, an acronym for Light Amplification by Stimulated Emission of Radiation, is a powerful tool with diverse applications in modern dentistry. It emits monochromatic,... (Review)
Review
Laser, an acronym for Light Amplification by Stimulated Emission of Radiation, is a powerful tool with diverse applications in modern dentistry. It emits monochromatic, coherent light resulting from photon-induced chain reactions. Available dental lasers include diode, argon, Er,Cr:YSGG, Er:YAG, Nd:YAG, and CO. The unique property of these lasers, allowing them to be effectively used on both soft and hard tissues based on the operational parameters, positions them as particularly suited for a wide range of dental procedures. Compared to traditional methods, lasers offer advantages such as improved hemostasis and quicker wound healing. Such benefits stress the shift towards laser technology in dental treatment. In the realm of dental prosthodontics, which focuses on esthetics, functionality, and the physiological aspects of dental prostheses, lasers provide promising outcomes. Among the prosthetic options, fixed partial dentures stand out for their ability to mimic natural teeth, offering both esthetic and functional features, leading to satisfactory long-term outcomes if managed properly. This review paper delves into the specific application of laser technology in the context of prosthetic rehabilitation involving fixed partial dentures. By investigating intraoral laser procedures, it contributes to understanding laser's role in improving patients' satisfaction and clinical efficiency in this field.
PubMed: 38920865
DOI: 10.3390/dj12060164 -
Geriatrics (Basel, Switzerland) Jun 2024Older adults often experience poor oral functions, hindering rehabilitation post-acute disease treatment. However, characteristics of hospitalized patients who would...
Older adults often experience poor oral functions, hindering rehabilitation post-acute disease treatment. However, characteristics of hospitalized patients who would benefit from professional oral-health management (POHM) have not been clarified. Therefore, we aimed to elucidate systemic and oral characteristics of patients requiring POHM during hospitalization in a convalescent hospital. This study included 312 participants admitted to the rehabilitation department of a convalescent hospital for a year. The patients were categorized according to POHM requirements (no-POHM group: 137 patients; POHM group: 175 patients) by discharge. Age, sex, primary disease at admission, Glasgow coma scale (GCS), Functional Independence Measurement (FIM), Mini nutritional assessment-short form (MNA-SF), Functional oral intake scale (FOIS), number of present and functional teeth, Oral Health Assessment Tool (OHAT) scores, and POHM details provided during patient hospitalization were compared. Binomial logistic-regression analysis identified patients requiring POHM as those who had suffered a stroke and had a low number of present teeth, poor overall oral health, low food form, and low motor skills at admission. A high percentage of POHM interventions comprised oral-hygiene care and denture treatment. In summary, patients whose oral health has deteriorated and those experiencing oral-intake difficulties upon admission to a convalescent hospital may require oral-health management.
PubMed: 38920438
DOI: 10.3390/geriatrics9030082 -
International Journal of Biomaterials 2024Three-dimensional (3D) printing is becoming more prevalent in the dental sector due to its potential to save time for dental practitioners, streamline fabrication...
Three-dimensional (3D) printing is becoming more prevalent in the dental sector due to its potential to save time for dental practitioners, streamline fabrication processes, enhance precision and consistency in fabricating prosthetic models, and offer cost-effective solutions. However, the effect of aging in artificial saliva of this type of material has not been explored. To assess the physical and mechanical properties of the two types of 3D-printed materials before and after being subjected to artificial saliva, a total of 219 acrylic resin specimens were produced. These specimens were made with two types of 3D-printed materials, namely, NextDent (ND) and Formlabs (FLs), and a Schottlander heat-cured (HC) resin material that was used as a control. Water sorption and solubility specimens ( = 5) were tested after three months of storage in artificial saliva. Moreover, the Vickers hardness, Martens hardness, flexural strength/modulus, and impact strength were evaluated both under dry conditions and after three months of storage in artificial saliva. The degree of conversion (DC), elemental analysis, and filler content were also investigated. The ANOVA showed that 3D-printed resins had significantly greater sorption than the control group ( < 0.05). However, the flexural strength values of the 3D-printed materials were significantly greater ( < 0.05) than those of the heat-cured material. The DC of the 3D-printed resins was lower than that of the control group, but the difference was not significant ( > 0.05). The 3D-printed materials contained significantly more filler than the control ( < 0.05). Moreover, the artificial saliva had a significant effect on the Vickers hardness for all tested groups and on the Martens hardness for the control group only ( < 0.05). Compared with conventional heat-cured materials, 3D-printed denture base materials demonstrated relatively poorer performance in terms of sorption, solubility, and DC but exhibited either comparable or superior mechanical properties. The aging process also influenced the Vickers and Martens' hardness. The strength of the 3D-printed materials was in compliance with ISO recommendations, and the materials could be used alongside conventional heat-cured materials.
PubMed: 38919543
DOI: 10.1155/2024/8060363 -
Nutrition Reviews Jun 2024Oral health and food oral-processing issues emerge with functional decline in the older adult population, potentially increasing the risk of malnutrition. Impairment of...
CONTEXT
Oral health and food oral-processing issues emerge with functional decline in the older adult population, potentially increasing the risk of malnutrition. Impairment of oral health is associated with poorer nutrition status; however, the relationship between oral factors and the intake of each nutrient remains poorly understood.
OBJECTIVE
The associations between different oral factors and nutrient intakes among community-dwelling older adults were investigated.
DATA SOURCES
A literature search from 5 databases (Web of Science, Scopus, Cochrane Library, Ovid [MEDLINE and Embase], and CINAHL) was completed on February 1, 2022. The search was limited to peer-reviewed articles published between the years 2012 and 2022.
DATA EXTRACTION
Six cross-sectional studies were included in the meta-analysis. Two authors independently completed the data extraction and summarized the study characteristics, factors adjusted for in the statistical analysis, the outcome, and summary statistics of the results.
DATA ANALYSIS
Meta-analyses showed evidence of a significant association between compromised oral factors (namely, denture status, chewing ability, and the number of teeth) with lower energy (weighted mean difference [WMD], -107 kcal d-1 (95% CI, -132 to -81), protein (WMD, -5.2 g d-1; 95% CI, -6.6 to -3.8), fat (WMD, -4.6 g d-1; 95% CI, -6.7 to -2.6), carbohydrate (WMD, -8.8 g d-1; 95% CI, -13.9 to -3.7), and vitamin C intakes (WMD, -12.9 mg d-1; 95% CI, -16.6 to -9.2) in older adults.
CONCLUSION
Oral health can be an indicator of compromised daily energy, protein, fat, carbohydrate, and vitamin C intakes in older adults. However, the small sample size of the studies included in this review and the heterogeneity among macronutrient studies should be considered. Because of the lack of studies covering all aspects of food oral processing (eg, salivary flow rate, tongue pressure), the associations between oral processing and nutrient intake were not thoroughly explored.
SYSTEMATIC REVIEW REGISTRATION
PROSPERO registration no. CRD42022308823.
PubMed: 38916939
DOI: 10.1093/nutrit/nuae080 -
Journal of Korean Medical Science Jun 2024Diabetes is recognized as a risk factor for various inflammatory conditions, including periodontitis. There exists a bidirectional relationship between glycemic control...
BACKGROUND
Diabetes is recognized as a risk factor for various inflammatory conditions, including periodontitis. There exists a bidirectional relationship between glycemic control and oral health in individuals with diabetes. This study aimed to analyze the link between glycemic control and oral health status among Korean patients with diabetes.
METHODS
Using data from a population-based nationwide survey conducted between 2007 and 2019, we identified 70,554 adults with diabetes-related information. The study population included 9,090 individuals diagnosed with diabetes and 61,164 healthy controls. The association between glycemic control, defined by mean glycated hemoglobin (HbA1c) values, and various oral health measures, such as tooth brushing frequency, periodontitis, denture wearing, Decayed, Missing, and Filled Teeth (DMFT) index, number of remaining teeth, and past-year dental clinic visits, was evaluated using multivariate logistic regression analyses.
RESULTS
Compared to the control group, patients with diabetes exhibited a higher prevalence of periodontitis (88.6% vs. 73.3%), complete dentures (5.0% vs. 1.5%), and elevated DMFT index (33.2% vs. 26.7%) (all < 0.001). Multivariate analyses revealed significant associations between diabetes and several oral health factors: denture status (No denture: adjusted odds ratio [aOR], 0.784; 95% confidence interval [CI], 0.627-0.979), and having fewer permanent teeth (0-19) (aOR, 1.474; 95% CI, 1.085-2.003). Additionally, a positive correlation was found between higher HbA1c levels and the risk of having fewer remaining teeth (0-19) (HbA1c < 6.5%: aOR, 1.129; 95% CI, 0.766-1.663; 6.5% ≤ HbA1c < 8.0%: aOR, 1.590; 95% CI, 1.117-2.262; HbA1c ≥ 8%: aOR, 1.910; 95% CI, 1.145-3.186) ( for trends = 0.041).
CONCLUSION
We found a positive association between diabetes and poor oral health, as well as a noteworthy relationship between reduced permanent teeth (≤ 19) and glycemic control. These insights emphasize the critical role of oral health management in diabetic care and underscore the importance of maintaining effective glycemic control strategies for overall health and well-being in patients with diabetes.
Topics: Humans; Female; Male; Oral Health; Republic of Korea; Middle Aged; Glycated Hemoglobin; Adult; Diabetes Mellitus; Glycemic Control; Aged; Periodontitis; Odds Ratio; Surveys and Questionnaires; Prevalence; Logistic Models; DMF Index; Blood Glucose
PubMed: 38915285
DOI: 10.3346/jkms.2024.39.e209 -
Forensic Science, Medicine, and... Jun 2024Identifying edentulous victims in forensic contexts poses a significant challenge. It has been reported that having a denture to reproduce and compare Palatal Rugae (PR)...
Identifying edentulous victims in forensic contexts poses a significant challenge. It has been reported that having a denture to reproduce and compare Palatal Rugae (PR) patterns is crucial for identifying edentulous individuals, yet there are no validated protocols for conducting this procedure. In this study, a new method was developed and validated for plaster molding of the internal surface of upper dentures, along with a protocol involving focus-stacked photographs and reference scales. Thirty-eight edentulous subjects participated in the study, obtaining plaster models of the patients (PM), and their dentures (AM) were standardized. The AM/PM model was highlighted and photographed with ten shots in different z-focuses for each model, using standard lighting and aligning the position of the PR perpendicular to the photographic axis using tubular spirit levels and modeling clay. The images were processed using the stacking technique and analyzed by three observers through the proposed protocol using Adobe® Photoshop®. The results were analyzed based on the intra-observer and inter-observer agreement levels, with a 95% confidence interval. This study demonstrated high-precision intra-observer and inter-observer agreement (k = 1) in the matching of Palatal Rugae (PR) and maxillary morphology obtained from participants and their dentures. The protocol is simple, cost-effective, and precise. It enables standardization of the technique for obtaining plaster models, and the exposure of PR and photographic protocol minimizes the presence of artifacts in the images, thereby reducing the likelihood of errors and promoting the reproducibility of both the recording technique and the comparison of the PR.
PubMed: 38913121
DOI: 10.1007/s12024-024-00852-1