-
ACS Applied Materials & Interfaces Jul 2024Repairing multiphasic defects is cumbersome. This study presents new soft and hard scaffold designs aimed at facilitating the regeneration of multiphasic defects by...
Repairing multiphasic defects is cumbersome. This study presents new soft and hard scaffold designs aimed at facilitating the regeneration of multiphasic defects by enhancing angiogenesis and improving cell attachment. Here, the nonimmunogenic, nontoxic, and cost-effective human serum albumin (HSA) fibril (HSA-F) was used to fabricate thermostable (up to 90 °C) and hard printable polymers. Additionally, using a 10.0 mg/mL HSA-F, an innovative hydrogel was synthesized in a mixture with 2.0% chitosan-conjugated arginine, which can gel in a cell-friendly and pH physiological environment (pH 7.4). The presence of HSA-F in both hard and soft scaffolds led to an increase in significant attachment of the scaffolds to the human periodontal ligament fibroblast (PDLF), human umbilical vein endothelial cell (HUVEC), and human osteoblast. Further studies showed that migration (up to 157%), proliferation (up to 400%), and metabolism (up to 210%) of these cells have also improved in the direction of tissue repair. By examining different in vitro and ex ovo experiments, we observed that the final multiphasic scaffold can increase blood vessel density in the process of per-vascularization as well as angiogenesis. By providing a coculture environment including PDLF and HUVEC, important cross-talk between these two cells prevails in the presence of roxadustat drug, a proangiogenic in this study. In vitro and ex ovo results demonstrated significant enhancements in the angiogenic response and cell attachment, indicating the effectiveness of the proposed design. This approach holds promise for the regeneration of complex tissue defects by providing a conducive environment for vascularization and cellular integration, thus promoting tissue healing.
PubMed: 38953207
DOI: 10.1021/acsami.4c06207 -
Journal of Materials Chemistry. B Jul 2024In this paper, we explore the development of a multi-functional surface designed to tackle the challenges posed by (), a common opportunistic pathogen. Infections...
In this paper, we explore the development of a multi-functional surface designed to tackle the challenges posed by (), a common opportunistic pathogen. Infections caused by during surgical procedures highlight the need for effective strategies to inhibit its adhesion, growth, and colonization, particularly on the surfaces of invasive medical devices. Until now, most existing research has focused on nanopillar structures (positive topographies). Uniform nanopillar arrays have been shown to control bacterial behavior based on the spacing between nanopillars. However, nanopillar structures are susceptible to external friction, impact, and force, making it challenging to maintain their antibacterial properties. Therefore, in this study, we investigate the antibacterial behavior of nanohole structures, which offer relatively superior mechanical robustness compared to nanopillars. Moreover, for applications in medical devices such as laparoscopes, there is a pressing need for surfaces that are not only transparent and flexible (or curved) but are also equipped with antibacterial properties. Our study introduces a scalable multi-functional surface that synergistically combines antibacterial and anti-fog properties. This is achieved by fabricating thin films with variously sized holes (ranging from 0.3 μm to 4 μm) using polyurethane acrylate (PUA). We assessed the activity of on these surfaces and found that a 1 μm-diameter-hole pattern significantly reduced the presence of live , without any detection of dead . This bacteriostatic effect is attributed to the restricted proliferation due to the confined area provided by the hole pattern. However, the persistence of some live on the surface necessitates further measures to minimize bacterial adhesion and enhance antibacterial effectiveness. To address this challenge, we coated the zwitterionic polymer 2-methacryloyloxyethyl phosphorylcholine (MPC) onto the nanohole pattern surface to reduce adhesion. Moreover, in long-term experiments on surfaces, the MPC-coated effectively inhibited the colonization of (18 h; 82%, 7 days; 83%, and 14 days; 68% antibacterial rate). By integrating PUA, MPC, and nanohole architectures into a single, flexible platform, we achieved a multi-functional surface catering to transparency, anti-fogging, and anti-biofouling requirements. This innovative approach marks a significant advancement in surface engineering, offering a versatile solution applicable in various fields, particularly in preventing contamination in invasive medical devices like laparoscopes. The resultant surface, characterized by its transparency, flexibility, and antibacterial functionality, stands out as a promising candidate for mitigating -related risks in medical applications.
PubMed: 38953113
DOI: 10.1039/d4tb00434e -
PeerJ 2024The bioaccessibility of tannins as antioxidants in meat is essential to maximise their effectiveness in protecting the product. This property determines the amount of...
The bioaccessibility of tannins as antioxidants in meat is essential to maximise their effectiveness in protecting the product. This property determines the amount of tannins available to interact with meat components, inhibiting lipid and protein oxidation and, consequently, prolonging shelf life and preserving the sensory quality of the product. The objective of this study was to evaluate the bioaccessibility of condensed tannins (CT) from extract (AME) and their effect on the physico-chemical characteristics of fattened lamb meat. Thirty-six Dorset × Hampshire lambs (3 months old and 20.8 ± 3.3 kg live weight) were used. The lambs were distributed equally ( = 9) into four treatments: T1, T2, T3 and T4, which included a basal diet plus 0%, 0.25%, 0.5% and 0.75% of CT from AME, respectively. At the end of the fattening period, bioaccessibility was evaluated, the animals were slaughtered and a sample of the longissimus dorsi (LD) muscle was collected to assess colour, lipid oxidation, cooking weight loss and shear force on days 1, 4, 7 and 14 of shelf-life, in samples preserved at -20 °C. In addition, the long chain fatty acid profile was analysed. A completely randomised design was used, and the means were compared with Tukey's test ( < 0.05). The mean lightness (L*), yellowness (b*) and hue (H*) values were higher for T3 and T4. The addition of CT did not affect ( > 0.05) redness (a*), cooking weight loss (CWL) or shear force (SF). T4 decreased ( < 0.05) stearic acid and increased cis-9 trans-12 conjugated linoleic acid (CLA). Bioaccessibility was higher in the supplemented groups (T1 < T2, T3 and T4). In conclusion, supplementing CT from AME in the diet of lambs did not reduce lipid oxidation, but T3 or T4 improved some aspects of meat colour and CLA deposition.
Topics: Animals; Sheep; Proanthocyanidins; Antioxidants; Biological Availability; Red Meat; Meat; Cooking; Plant Extracts; Muscle, Skeletal
PubMed: 38952978
DOI: 10.7717/peerj.17572 -
PeerJ 2024The aim of this study was threefold. Firstly, it aimed to introduce and detail a novel method for chemically etching the bases of stainless-steel orthodontic brackets.... (Randomized Controlled Trial)
Randomized Controlled Trial Comparative Study
Comparative bond failure rate of orthodontic brackets when bracket base is treated with micro-abrasive blasting . acid etching: eighteen month randomized control trial and scanning electron microscope study.
BACKGROUND
The aim of this study was threefold. Firstly, it aimed to introduce and detail a novel method for chemically etching the bases of stainless-steel orthodontic brackets. Secondly, the study sought to investigate the structural alterations within the brackets' microstructure following chemical etching compared to those with sandblasted bases, using electron microscopy analysis. Lastly, the study aimed to evaluate and compare the long-term durability and survivability of orthodontic brackets with chemically etched bases those with sandblasted bases, both bonded using the conventional acid etch technique with Transbond XT adhesive, over an 18-month follow-up period.
METHODS
The study was a randomized clinical control trial with triple blinding and split-mouth study design and consisted of two groups. The brackets in the sandblasted group were prepared by sandblasting the intaglio surface of the base of the bracket with 50 µm SiO particles. Hydrofluoric acid was used to roughen the base in the acid-etched group. The bases of the brackets were viewed under an electron microscope to analyze the topographical changes.
RESULTS
A total of 5,803 brackets (3,006 acid-etch, 2,797 sandblasted) in 310 patients were bonded, in a split-mouth design by the same operator. The patients were followed for 18 months. The failure rate of 2.59% and 2.7% was noted in an acid-etched and sandblasted group, respectively. There was a close approximation of curves in the Kaplan-Meier plot, and the survival distribution of the two groups in the log-rank (Mantel-Cox) test was insignificant; x2 = 0.062 ( value = 0.804).
CONCLUSION
Acid etching if the bases of the brackets can be used as an alternative to sandblasting furthermore acid etching can be performed on the chair side.
Topics: Orthodontic Brackets; Humans; Acid Etching, Dental; Microscopy, Electron, Scanning; Female; Male; Dental Bonding; Adolescent; Surface Properties; Adult; Resin Cements; Young Adult; Stainless Steel; Dental Etching
PubMed: 38952970
DOI: 10.7717/peerj.17645 -
PeerJ 2024This study explored the utilization of luffa sponge (LS) in enhancing acetification processes. LS is known for having high porosity and specific surface area, and can...
BACKGROUND
This study explored the utilization of luffa sponge (LS) in enhancing acetification processes. LS is known for having high porosity and specific surface area, and can provide a novel means of supporting the growth of acetic acid bacteria (AAB) to improve biomass yield and acetification rate, and thereby promote more efficient and sustainable vinegar production. Moreover, the promising potential of LS and luffa sponge coated with κ-carrageenan (LSK) means they may represent effective alternatives for the co-production of industrially valuable bioproducts, for example bacterial cellulose (BC) and acetic acid.
METHODS
LS and LSK were employed as adsorbents for UMCC 2951 in a submerged semi-continuous acetification process. Experiments were conducted under reciprocal shaking at 1 Hz and a temperature of 32 °C. The performance of the two systems (LS-AAB and LSK-AAB respectively) was evaluated based on cell dry weight (CDW), acetification rate, and BC biofilm formation.
RESULTS
The use of LS significantly increased the biomass yield during acetification, achieving a CDW of 3.34 mg/L versus the 0.91 mg/L obtained with planktonic cells. Coating LS with κ-carrageenan further enhanced yield, with a CDW of 4.45 mg/L. Acetification rates were also higher in the LSK-AAB system, reaching 3.33 ± 0.05 g/L d as opposed to 2.45 ± 0.05 g/L d for LS-AAB and 1.13 ± 0.05 g/L d for planktonic cells. Additionally, BC biofilm formation during the second operational cycle was more pronounced in the LSK-AAB system (37.0 ± 3.0 mg/L, as opposed to 25.0 ± 2.0 mg/L in LS-AAB).
CONCLUSIONS
This study demonstrates that LS significantly improves the efficiency of the acetification process, particularly when enhanced with κ-carrageenan. The increased biomass yield, accelerated acetification, and enhanced BC biofilm formation highlight the potential of the LS-AAB system, and especially the LSK-AAB variant, in sustainable and effective vinegar production. These systems offer a promising approach for small-scale, semi-continuous acetification processes that aligns with eco-friendly practices and caters to specialized market needs. Finally, this innovative method facilitates the dual production of acetic acid and bacterial cellulose, with potential applications in biotechnological fields.
Topics: Carrageenan; Acetobacter; Biomass; Acetic Acid; Luffa; Adsorption; Cellulose; Biofilms
PubMed: 38952965
DOI: 10.7717/peerj.17650 -
RSC Advances Jun 2024Porphyrin is a typical tetrapyrrole chromophore-based pigment with a special electronic structure and functionalities, which is frequently introduced into various porous... (Review)
Review
Porphyrin is a typical tetrapyrrole chromophore-based pigment with a special electronic structure and functionalities, which is frequently introduced into various porous organic polymers (POPs). Porphyrin-based POPs are widely used in various fields ranging from environmental and energy to biomedicine-related fields. Currently, most porphyrin-based POPs are prepared the copolymerization of specific-group-functionalized porphyrins with other building blocks, in which the tedious and inefficient synthesis procedure for the porphyrin greatly hinders the development of such materials. This review aimed to summarize information on porphyrin-based POPs synthesized using the Alder-Longo method, thereby skipping the complex synthesis of porphyrin-bearing monomers, in which the porphyrin macrocycles are formed directly the cyclic tetramerization of pyrrole with monomers containing multiple aldehyde groups during the polymerization process. The representative applications of porphyrin-based POPs derived using the Alder-Longo method are finally introduced, which pinpoints a clear relationship between the structure and function from the aspect of the building blocks used and porous structures. This review is therefore valuable for the rational design of efficient porphyrin-based porous organic polymer systems that may be utilized in various fields from energy-related conversion/storage technologies to biomedical science.
PubMed: 38952933
DOI: 10.1039/d4ra02277g -
Biomaterials Research 2024One of the bacterial infections caused by tympanic membrane perforation is otitis media (OM). Middle ear inflammation causes continuous pain and can be accompanied by...
One of the bacterial infections caused by tympanic membrane perforation is otitis media (OM). Middle ear inflammation causes continuous pain and can be accompanied by aftereffects such as facial nerve paralysis if repeated chronically. Therefore, it is necessary to develop an artificial tympanic membrane (TM) that can effectively regenerate the eardrum due to the easy implantation and removal of OM inflammation. In this study, we synthesized hydrogel by mixing gelatin and polyacrylamide. Cefuroxime sodium salt was then incorporated into this hydrogel to both regenerate the TM and treat OM. Cytotoxicity experiments confirmed the biocompatibility of hydrogels equipped with antibiotics, and we conducted drug release and antibacterial experiments to examine continuous drug release. Through experiments, we have verified the excellent biocompatibility, drug release ability, and antibacterial effectiveness of hydrogel. It holds the potential to serve as an effective strategy for treating OM and regenerating TM as a drug delivery substance.
PubMed: 38952716
DOI: 10.34133/bmr.0049 -
International Journal of Nanomedicine 2024Implants are widely used in the field of orthopedics and dental sciences. Titanium (TI) and its alloys have become the most widely used implant materials, but...
BACKGROUND
Implants are widely used in the field of orthopedics and dental sciences. Titanium (TI) and its alloys have become the most widely used implant materials, but implant-associated infection remains a common and serious complication after implant surgery. In addition, titanium exhibits biological inertness, which prevents implants and bone tissue from binding strongly and may cause implants to loosen and fall out. Therefore, preventing implant infection and improving their bone induction ability are important goals.
PURPOSE
To study the antibacterial activity and bone induction ability of titanium-copper alloy implants coated with nanosilver/poly (lactic-co-glycolic acid) (NSPTICU) and provide a new approach for inhibiting implant-associated infection and promoting bone integration.
METHODS
We first examined the in vitro osteogenic ability of NSPTICU implants by studying the proliferation and differentiation of MC3T3-E1 cells. Furthermore, the ability of NSPTICU implants to induce osteogenic activity in SD rats was studied by micro-computed tomography (micro-CT), hematoxylin-eosin (HE) staining, masson staining, immunohistochemistry and van gieson (VG) staining. The antibacterial activity of NSPTICU in vitro was studied with gram-positive and gram-negative bacteria. was used as the test bacterium, and the antibacterial ability of NSPTICU implanted in rats was studied by gross view specimen collection, bacterial colony counting, HE staining and Giemsa staining.
RESULTS
Alizarin red staining, alkaline phosphatase (ALP) staining, quantitative real-time polymerase chain reaction (qRT-PCR) and western blot analysis showed that NSPTICU promoted the osteogenic differentiation of MC3T3-E1 cells. The in vitro antimicrobial results showed that the NSPTICU implants exhibited better antibacterial properties. Animal experiments showed that NSPTICU can inhibit inflammation and promote the repair of bone defects.
CONCLUSION
NSPTICU has excellent antibacterial and bone induction ability, and has broad application prospects in the treatment of bone defects related to orthopedics and dental sciences.
Topics: Animals; Anti-Bacterial Agents; Osteogenesis; Polylactic Acid-Polyglycolic Acid Copolymer; Mice; Staphylococcus aureus; Coated Materials, Biocompatible; Rats, Sprague-Dawley; Escherichia coli; Cell Differentiation; Prostheses and Implants; Alloys; Rats; Titanium; Silver; Cell Proliferation; Copper; Male; X-Ray Microtomography; Cell Line; Metal Nanoparticles
PubMed: 38952675
DOI: 10.2147/IJN.S456906 -
Iranian Journal of Medical Sciences Jun 2024
Topics: Humans; Polymers; Biocompatible Materials
PubMed: 38952639
DOI: 10.30476/ijms.2024.99429.3148 -
Heliyon Jun 2024Recently, investigation of advanced shielding materials to be used as an alternative to lead apron has become important. In the current study, MgO loaded into PVC matrix...
Recently, investigation of advanced shielding materials to be used as an alternative to lead apron has become important. In the current study, MgO loaded into PVC matrix as a non-lead modern shielding composite was modeled to evaluate its performance on radiation protective clothing (RPC). Parameters such as mass attenuation coefficient (MAC), mean free path (MFP), flux buildup factor (FBF), transmission factor (TF) and lead equivalent value (LEV) of samples were calculated using MCNPX Code. The simulation of the MCNP code was validated, by comparing the mass attenuation of concrete sample, with standard XCOM data and very good agreement was attended between XCOM and MC Code results. The MAC of nano and micro-sized samples were also compared with pure PVC and it was found that the nano MgO particle exhibits higher attenuation compared to micro MgO particle and pure PVC. The results show that, the MAC of samples increased to 63.13 % in 1.332 MeV with increasing filler concentration of nano MgO to 50 wt% relative to pure PVC. Investigation of LEV shows that nano MgO sample has more effective than Pb in 1.173 and 1.332 MeV gamma ray energy so that it provides 36.46 % and 11.13 % lighter RPC than Pb ones.
PubMed: 38952365
DOI: 10.1016/j.heliyon.2024.e32711