-
Materials (Basel, Switzerland) Jun 2024This work explores the effects of rigid (0.1, 0.25, and 0.5 wt. %) and semi-flexible (0.5, 1.0, and 2.5 wt. %) all-aromatic polyelectrolyte reinforcements as rheological...
This work explores the effects of rigid (0.1, 0.25, and 0.5 wt. %) and semi-flexible (0.5, 1.0, and 2.5 wt. %) all-aromatic polyelectrolyte reinforcements as rheological and morphological modifiers for preparing phosphate geopolymer glass-ceramic composites. Polymer-modified aluminosilicate-phosphate geopolymer resins were prepared by high-shear mixing of a metakaolin powder with 9M phosphoric acid and two all-aromatic, sulfonated polyamides. Polymer loadings between 0.5-2.5 wt. % exhibited gel-like behavior and an increase in the modulus of the geopolymer resin as a function of polymer concentration. The incorporation of a 0.5 wt. % rigid polymer resulted in a three-fold increase in viscosity relative to the control phosphate geopolymer resin. Hardening, dehydration, and crystallization of the geopolymer resins to glass-ceramics was achieved through mold casting, curing at 80 °C for 24 h, and a final heat treatment up to 260 °C. Scanning electron microscopy revealed a decrease in microstructure porosity in the range of 0.78 μm to 0.31 μm for geopolymer plaques containing loadings of 0.5 wt. % rigid polymer. Nano-porosity values of the composites were measured between 10-40 nm using nitrogen adsorption (Brunauer-Emmett-Teller method) and transmission electron microscopy. Nanoindentation studies revealed geopolymer composites with Young's modulus values of 15-24 GPa and hardness values of 1-2 GPa, suggesting an increase in modulus and hardness with polymer incorporation. Additional structural and chemical analyses were performed via thermal gravimetric analysis, Fourier transform infrared radiation, X-ray diffraction, and energy dispersive spectroscopy. This work provides a fundamental understanding of the processing, microstructure, and mechanical behavior of water-soluble, high-performance polyelectrolyte-reinforced geopolymer composites.
PubMed: 38930225
DOI: 10.3390/ma17122856 -
Materials (Basel, Switzerland) Jun 2024Iron red, a traditional Jingdezhen overglaze color, is primarily colored with iron oxide (FeO). In traditional processes, the main ingredient for the iron red overglaze...
Iron red, a traditional Jingdezhen overglaze color, is primarily colored with iron oxide (FeO). In traditional processes, the main ingredient for the iron red overglaze color, raw iron red, is produced by calcining iron vitriol (FeSO·7HO). Analysis of ancient iron red porcelain samples indicates that the coloration is unstable, ranging from bright red to dark red and occasionally to black. Addressing this, the present study, from a ceramic technology standpoint, conducts a series of calcination experiments on industrial iron vitriol at varying temperatures. Utilizing methodologies such as differential scanning calorimetry-thermogravimetry (DSC-TG), Raman spectroscopy, X-ray diffraction (XRD), scanning electron microscopy with X-ray energy dispersive spectrometry (SEM-EDS), and optical microscopy (OM), this research scientifically explores the impact of iron vitriol's calcination temperature on the coloration of traditional Jingdezhen iron red overglaze color. The findings indicate that from room temperature to 550 °C, the dehydration of iron vitriol resulted in the formation of Fe(SO) and a minimal amount of α-FeO, rendering the iron red overglaze color a yellowish-red shade. At 650 °C, the coexistence of Fe(SO) and α-FeO imparted a brick-red color to the iron red. As the temperature was elevated to 700 °C, the desulfurization of Fe(SO) produced α-FeO, transitioning the iron red to an orange red. With further temperature increase to 750 °C, the particle size of α-FeO grew and the crystal reflectivity decreased, resulting in a purplish-red hue. Throughout this stage, the powder remained in a single α-FeO phase. Upon further heating to 800 °C, the crystallinity of α-FeO enhanced, giving the iron red overglaze color a dark red or even black appearance.
PubMed: 38930171
DOI: 10.3390/ma17122800 -
Scientific Reports Jun 2024Biginelli-type heterocyclic compounds are particularly important due to their several chemical reactivities and various range of pharmacological activity. Therefore...
Synthesis of 3,4-dihydropyrimidines and octahydroquinazolinones by SBA-15 supported schiff-base iron (III) complex as durable and reusable catalyst under ultrasound irradiation.
Biginelli-type heterocyclic compounds are particularly important due to their several chemical reactivities and various range of pharmacological activity. Therefore Biginelli reaction has witnessed several modification and numerous investigations are continuing in this field to develop more effective and efficient methodologies. In this research, Iron (III) schiff base immobilized SBA-15 has been prepared as a valuable, efficient, and recoverable catalyst for the Biginelli reaction. The morphology of the prepared catalyst was identified by spectroscopic characterization techniques and structural microscopic analysis including Fourier transform infrared (FT-IR) patterns, X-ray diffraction (XRD) by powder crystal method, Energy-dispersive X-ray spectroscopy (EDS) study, Thermogravimetric-Differential thermal analysis (TGA-DTA), Transmission electron microscopy (TEM) and Field emission scanning electron microscopy (FE-SEM) images. Biginelli compounds containing 3,4-dihydropyrimidines and octahydroquinazolinones were conveniently synthesized by this catalyzed protocol from the cycloaddition of aromatic aldehydes with the 1,3-dicarbonyl substrates and urea via ultrasonic waves. The several advantages of the presented approach are high yields and easy isolation of products, shorter reaction times, and milder conditions, structural stability and reusable catalyst. The combination of heterogeneous catalyst and ultrasonic radiation can make catalytic reactions more efficient than traditional ways attractive for academic researchers and application scholars in the industry.
PubMed: 38926512
DOI: 10.1038/s41598-024-65519-x -
Scientific Reports Jun 2024In this research, chemical vapor deposition (CVD) method was used to synthesize boron nitride nanotube (BNNT) powder. This method involves heating multi-walled carbon...
In this research, chemical vapor deposition (CVD) method was used to synthesize boron nitride nanotube (BNNT) powder. This method involves heating multi-walled carbon nanotube (MWCNT) and boric acid in the presence of ammonia gas up to 1000 °C. Then MWCNT and synthetic BNNT were coated on the copper mesh via dip-coating method separately to prepare nano-structured membranes for efficient oil/water separation. Various analyzes were performed to identify the synthetic BNNT properties (X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Brunauer-Emmett-Teller (BET), field emission scanning electron microscopy (FESEM), energy dispersive spectroscopy (EDS) and prepared coated membranes (FESEM, atomic force microscopy (AFM), water contact angle (WCA), oil contact angle (OCA) and oil/water separation process). Water and oil contact angle analyzes showed the super-oleophilic properties of both membranes with the underwater OCA of about 128°. For the separation process, a dead-end filtration setup was used, and free oil water mixture and o/w emulsion were prepared. So, in the separation process water was retained and decalin passed through both prepared membranes. The flux of CNT coated membrane was about 458 L m h, while this amount was 1834 L m h for BNNT coated membrane and 99% separation efficiency was achieved by both of them. This four-fold increase in flux is due to the fact that the inner diameter of boron nitride nanotubes synthesized is four times larger than the inner diameter of MWCNT.
PubMed: 38926511
DOI: 10.1038/s41598-024-65414-5 -
Scientific Reports Jun 2024Long-chain polyunsaturated fatty acids (LCPUFA) are of interest due to their potential health properties and have a significant role in reducing the risk of various...
Long-chain polyunsaturated fatty acids (LCPUFA) are of interest due to their potential health properties and have a significant role in reducing the risk of various chronic diseases in humans. It is commonly used as a supplement. However, lipid oxidation is an important negative factor caused by environmental, processing, and limited water solubility of LCPUFA, making them difficult to incorporate into food products. The objective of this research work was to prevent oxidation, extend shelf life, enhance the stability of fatty acids, and to achieve controlled release by preparing spray-dried powder (SDM). For spray-drying, aqueous emulsion blends were formulated using a 1:1 ratio of chia seed oil (CSO) and fish oil (FO) and using a laboratory-scale spray-dryer with varying conditions: inlet air temperature (IAT, 125-185 °C), wall material (WM, 5-25%), pump speed (PS, 3-7 mL/min), and needle speed (NS, 3-11 s). The maximum alpha-linolenic acid (ALA) content was 33 ± 1%. The highest values of eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) in the microcapsules were 8.4 ± 0.4 and 13 ± 1%, respectively. Fourier transform infrared and X-Ray diffraction analysis results indicated that SDM was successfully formulated with Gum Arabic and maltodextrin (MD). The blending without encapsulation of CSO and FO was digested more efficiently and resulted in more oil being released with simulated gastric fluid (SGF), simulated intestinal fluid (SIF), and SGF + SIF conditions without heating. No significant changes were observed for saturated, monounsaturated, and LCPUFA, whether exposed or not to gastrointestinal conditions. However, compared to the release of SDM, it can be useful for designing delivery systems for the controlled release of essential fatty acids.
Topics: Fish Oils; Capsules; Spray Drying; Plant Oils; Salvia; Fatty Acids; Humans
PubMed: 38926468
DOI: 10.1038/s41598-024-65214-x -
Nature Communications Jun 2024Suppressing the kinetically favorable lattice oxygen oxidation mechanism pathway and triggering the adsorbate evolution mechanism pathway at the expense of activity are...
Suppressing the kinetically favorable lattice oxygen oxidation mechanism pathway and triggering the adsorbate evolution mechanism pathway at the expense of activity are the state-of-the-art strategies for Ru-based electrocatalysts toward acidic water oxidation. Herein, atomically dispersed Ru species are anchored into an acidic stable vinyl-linked 2D covalent organic framework with unique crossed π-conjugation, termed as COF-205-Ru. The crossed π-conjugated structure of COF-205-Ru not only suppresses the dissolution of Ru through strong Ru-N motifs, but also reduces the oxidation state of Ru by multiple π-conjugations, thereby activating the oxygen coordinated to Ru and stabilizing the oxygen vacancies during oxygen evolution process. Experimental results including X-ray absorption spectroscopy, in situ Raman spectroscopy, in situ powder X-ray diffraction patterns, and theoretical calculations unveil the activated oxygen with elevated energy level of O 2p band, decreased oxygen vacancy formation energy, promoted electrochemical stability, and significantly reduced energy barrier of potential determining step for acidic water oxidation. Consequently, the obtained COF-205-Ru displays a high mass activity with 2659.3 A g, which is 32-fold higher than the commercial RuO, and retains long-term durability of over 280 h. This work provides a strategy to simultaneously promote the stability and activity of Ru-based catalysts for acidic water oxidation.
PubMed: 38926414
DOI: 10.1038/s41467-024-49834-5 -
Langmuir : the ACS Journal of Surfaces... Jun 2024Ordered mesoporous silica is widely used in catalysis, adsorption, and biomedicine, among which SBA-15 (Santa Barbara Amorphous-15) is one of the most widely studied....
Ordered mesoporous silica is widely used in catalysis, adsorption, and biomedicine, among which SBA-15 (Santa Barbara Amorphous-15) is one of the most widely studied. However, the synthesis of SBA-15 often requires strong acid (hydrochloric acid or sulfuric acid), which will not only corrode industrial equipment but also pollute the environment with the wastewater containing strong acid and halogen (sulfur). Here, we demonstrate a green synthetic strategy for SBA-15 under weakly acidic conditions through an anionic assembly route. With the assistance of poly(acrylic acid) (PAA) and 3-aminopropyltrimethoxysilane (APMS), the pH value of the synthesis system can be increased to 4-5, which is a mild near-neutral condition. In addition, halogen-free synthesis using organic acids is also achieved. The powder X-ray diffraction (XRD), transmission electron microscopy (TEM), and N sorption characterizations show that the obtained SBA-15 has good texture properties, with a specific surface area of 430-500 m/g and ordered 6-8 nm mesopores, which is similar to SBA-15 synthesized in traditional strong acid. This strategy provides a facile and environmentally friendly route for the large-scale production of ordered mesoporous materials.
PubMed: 38924705
DOI: 10.1021/acs.langmuir.4c01338 -
Biometals : An International Journal on... Jun 2024In the present manuscript, novel macrocyclic Schiff base complexes [Zn(NMacL)Cl-Zn(NMacL)Cl] were synthesized by the reaction of ZnCl and macrocyclic ligands...
Novel tetraaza macrocyclic Schiff base complexes of bivalent zinc: microwave-assisted green synthesis, spectroscopic characterization, density functional theory calculations, molecular docking studies, in vitro antimicrobial and anticancer activities.
In the present manuscript, novel macrocyclic Schiff base complexes [Zn(NMacL)Cl-Zn(NMacL)Cl] were synthesized by the reaction of ZnCl and macrocyclic ligands (NMacL-NMacL) derived from diketone and diamines under microwave irradiation method and conventional method. The structures of the obtained complexes were identified by various spectrometric methods such as Fourier transformation infra-red (FT-IR), nuclear magnetic resonance (NMR), high-resolution mass spectrometry (HR-MS), powder X-ray diffraction, molar conductivity, and UV-vis. The structures of the synthesized compounds were optimized by using the def2-TZV/J and def2-SVP/J Coulomb fitting basis sets at B3LYP level in density functional theory (DFT) calculations. The macrocyclic Schiff base complexes exhibited higher activities against Gram-positive bacteria (Staphylococcus aureus and Bacillus cereus), Gram-negative bacteria (Escherichia coli and Xanthomonas campestris), and fungal strains (Fusarium oxysporum and Candida albicans) in comparison to macrocyclic Schiff base ligands. Furthermore, the newly synthesized macrocyclic compounds were assessed for their anticancer activity against three cell lines: A549 (human alveolar adenocarcinoma epithelial cell line), HT-29 (human colorectal adenocarcinoma cell line), and MCF-7 (human breast adenocarcinoma cell line) using the MTT assay. The obtained results showed that the macrocyclic complex [Zn(NMacL)Cl] displayed the highest cytotoxic activity (2.23 ± 0.25 µM, 6.53 ± 0.28 µM, and 7.40 ± 0.45 µM for A549, HT-29, and MCF-7 cancer cell lines, respectively). Additionally, molecular docking investigations were conducted to elucidate potential molecular interactions between the synthesized macrocyclic compounds and target proteins. The results revealed a consistent agreement between the docking calculations and the experimental data.
PubMed: 38922505
DOI: 10.1007/s10534-024-00616-y -
Nanomaterials (Basel, Switzerland) Jun 2024Self-made agglomerated nanometer CeO-YO-ZrO (CYSZ) powders for plasma spray-physical vapor deposition (PS-PVD) were prepared by spray-drying, followed by calcination...
Effect of Calcination Temperature on the Microstructure, Composition and Properties of Agglomerated Nanometer CeO-YO-ZrO Powders for Plasma Spray-Physical Vapor Deposition (PS-PVD) and Coatings Thereof.
Self-made agglomerated nanometer CeO-YO-ZrO (CYSZ) powders for plasma spray-physical vapor deposition (PS-PVD) were prepared by spray-drying, followed by calcination treatment at four different temperatures (600 °C, 700 °C, 800 °C, 900 °C). The physical properties, microstructure, and phase composition of the calcined powders were investigated using a laser particle size analyzer, scanning electron microscopy (SEM), and X-ray diffraction (XRD). The results showed that compared to the agglomerated powders obtained through spray-drying, the particle size of the agglomerated powders changed with increasing calcination temperature, accompanied by an increase in the self-bonding force of the agglomerated powder particles. The proper calcination temperature improved the sprayability of the powders. Additionally, with the increase in the calcination temperature, a transformation from the m-phase to the t-phase occurred in the powder, with Ce partially entering the Zr lattice to form the t-ZrCeO phase, which facilitated the suppression of the m-phase and improved the high-temperature phase stability. It was also found that the PS-PVD coatings prepared using the aforementioned powders exhibited coarser columnar structures with increasing powder calcination temperature.
PubMed: 38921871
DOI: 10.3390/nano14120995 -
Scientific Reports Jun 2024This study compares the adsorption behavior of both Methylene Blue (MB) and Congo Red (CR) dyes on the surfaces of cement kiln dust (CKD) powder from the experimentally...
This study compares the adsorption behavior of both Methylene Blue (MB) and Congo Red (CR) dyes on the surfaces of cement kiln dust (CKD) powder from the experimentally simulated wastewater solution. The cement kiln dust powder was characterized using X-ray Fluorescence (XRF), X-ray diffraction (XRD), N adsorption-desorption Brunauer-Emmett-Teller (BET), Fourier Transform Infrared Spectroscopy (FTIR), and Scanning Electron Microscopy (SEM) tests. The adsorption for such dyes was studied under varying mixing contact times, temperatures, and pH as well as various initial concentrations of both dyes and adsorbent using the batch mode experiments. Pseudo-first-order, pseudo-second-order, and intraparticle diffusion models were applied, and the results revealed that the pseudo-second-order fitted well to the kinetic data. Thermodynamic parameters stated that the adsorption process was endothermic. Studying Linear and nonlinear forms of Langmuir and Freundlich's adsorption isotherms revealed that the adsorption process was followed by both homogeneous mono-layer and heterogeneous multilayer coverage on the active sites of cement kiln dust particles. The data showed that the adsorption capacities of the methylene blue and Congo red dyes were 58.43 and 123.42 mg/g, respectively and cement kiln dust is an adsorbent with little cost for the treatment of wastewater.
PubMed: 38918519
DOI: 10.1038/s41598-024-64191-5