-
Polymers Jun 2024The bearing capacity of fiber-reinforced plastic (FRP) helical screw piles is determined by the lesser of the breaking load at the bolted joint and the resistance...
The bearing capacity of fiber-reinforced plastic (FRP) helical screw piles is determined by the lesser of the breaking load at the bolted joint and the resistance provided by the screw tip area. In this study, compression and tensile tests were performed with the number of bolts and edge distance as variables. It showed similar strength when compared to the failure stress derived from material testing. In addition, considering load resistance performance, the optimal screw cross section was obtained through parametric analysis. Considering the structural behavior of the screw, a prediction equation was presented to design the screw cross-section as a tapered cross-section using a theoretical method. As a result of comparing the screw cross-section with the finite element analysis results, it was confirmed that the design stress and analysis stress showed an error of 1.1 MPa and were within the allowable stress of 80 MPa.
PubMed: 38932083
DOI: 10.3390/polym16121733 -
Polymers Jun 2024The semiconductor-sensitized thermal cell (STC) is a new thermoelectric conversion technology. The development of nonliquid electrolytes is the top priority for the...
The semiconductor-sensitized thermal cell (STC) is a new thermoelectric conversion technology. The development of nonliquid electrolytes is the top priority for the practical application of the STC. In this study, a novel gel polymer electrolyte (PH-based GPE) composed of poly(vinylidenefluoride--hexafluoropropylene) (PH), 1-Methyl-2-pyrrolidone (NMP), and Cu ions was synthesized and applied to the STC system. The PH-based GPE synthesized at 45 °C showed higher open-circuit voltage (-0.3 V), short-circuit current density (59 μA cm) and diffusion coefficient (7.82 × 10 m s), indicating that a well-balanced structure among the NMP molecules was formed to generate a high-efficiency conduction path of the Cu ions. Moreover, the ion diffusion lengths decreased with decreasing content rates of NMP for the PH-based GPEs, indicating that the NMP plays an important role in the diffusion of Cu ions. Furthermore, the activation energy was calculated to be 107 kJ mol, and that was smaller compared to 150 kJ mol for the poly(ethylene glycol)-based liquid electrolyte. These results play an important reference role in the development of electrolytes for STC systems. At the same time, they also provide a new avenue and reference indicator for the synthesis of high-performance and safe GPEs.
PubMed: 38932082
DOI: 10.3390/polym16121732 -
Polymers Jun 2024Silver-based metal-organic decomposition inks composed of silver salts, complexing agents and volatile solvents are now the subject of much research due to the...
Silver-based metal-organic decomposition inks composed of silver salts, complexing agents and volatile solvents are now the subject of much research due to the simplicity and variability of their preparation, their high stability and their relatively low sintering temperature. The use of this type of ink in inkjet printing allows for improved cost-effective and environmentally friendly technology for the production of electrical devices, including flexible electronics. An approach to producing a silver salt-based reactive ink for jet printing has been developed. The test images were printed with an inkjet printer onto polyimide substrates, and two-stage thermal sintering was carried out at temperatures of 60 °C and 100-180 °C. The structure and electrical properties of the obtained conductive lines were investigated. As a result, under optimal conditions an electrically conductive film with low surface resistance of approximately 3 Ω/square can be formed.
PubMed: 38932081
DOI: 10.3390/polym16121731 -
Polymers Jun 2024Car manufacturers are currently challenged with increasing the sustainability of their products and production to comply with sustainability requirements and...
Car manufacturers are currently challenged with increasing the sustainability of their products and production to comply with sustainability requirements and legislation. One way to enhance product sustainability is by reducing the carbon footprint of fossil-based plastic parts. Particle foams are a promising solution to achieve the goal of using lightweight parts with minimal material input. Ongoing developments involve the use of expanded particle foam beads made from engineering plastics such as polyamide (EPA). To achieve this, a simulated life cycle was carried out on virgin EPA, including mechanical recycling. The virgin material was processed into specimens using a steam-free method. One series was artificially aged to replicate automotive life cycle stresses, while the other series was not. The mechanical recycling and re-foaming of the minipellets were then carried out, resulting in an EPA particle foam with 100% recycled content. Finally, the thermal and chemical material properties were comparatively analysed. The study shows that the recycled EPA beads underwent polymer degradation during the simulated life cycle, as evidenced by their material properties. For instance, the recycled beads showed a more heterogeneous molecular weight distribution (an increase in PDI from two to three), contained carbonyl groups, and exhibited an increase in the degree of crystallization from approximately 24% to 36%.
PubMed: 38932080
DOI: 10.3390/polym16121730 -
Polymers Jun 2024This study addresses the need for enhanced antimicrobial properties of electrospun membranes, either through surface modifications or the incorporation of antimicrobial...
This study addresses the need for enhanced antimicrobial properties of electrospun membranes, either through surface modifications or the incorporation of antimicrobial agents, which are crucial for improved clinical outcomes. In this context, chitosan-a biopolymer lauded for its biocompatibility and extracellular matrix-mimicking properties-emerges as an excellent candidate for tissue regeneration. However, fabricating chitosan nanofibers via electrospinning often challenges the preservation of their structural integrity. This research innovatively develops a chitosan/polycaprolactone (CH/PCL) composite nanofibrous membrane by employing a layer-by-layer electrospinning technique, enhanced with silver nanoparticles (AgNPs) synthesized through a wet chemical process. The antibacterial efficacy, adhesive properties, and cytotoxicity of electrospun chitosan membranes were evaluated, while also analyzing their hydrophilicity and nanofibrous structure using SEM. The resulting CH/PCL-AgNPs composite membranes retain a porous framework, achieve balanced hydrophilicity, display commendable biocompatibility, and exert broad-spectrum antibacterial activity against both Gram-negative and Gram-positive bacteria, with their efficacy correlating to the AgNP concentration. Furthermore, our data suggest that the antimicrobial efficiency of these membranes is influenced by the timed release of silver ions during the incubation period. Membranes incorporated starting with AgNPs at a concentration of 50 µg/mL effectively suppressed the growth of both microorganisms during the early stages up to 8 h of incubation. These insights underscore the potential of the developed electrospun composite membranes, with their superior antibacterial qualities, to serve as innovative solutions in the field of tissue engineering.
PubMed: 38932079
DOI: 10.3390/polym16121729 -
Polymers Jun 2024With the increasing application of electrospun PVDF webs in piezoelectric sensors and energy-harvesting devices, it is crucial to understand their responses under...
With the increasing application of electrospun PVDF webs in piezoelectric sensors and energy-harvesting devices, it is crucial to understand their responses under complex mechanical excitations. However, the dependence of the piezoelectric effect on mechanical excitation properties is not fully comprehended. This study aims to investigate the piezoelectric output of randomly oriented electrospun PVDF nanofiber webs fabricated through different electrospinning processes at various mechanical excitation frequencies. The electrospun PVDF web was sandwiched between two textile electrodes, and its piezoelectric output as a full-textile sensor was measured across a frequency range from 0.1 Hz to 10 Hz. The experimental results revealed that the piezoelectric output of the electrospun PVDF web exhibited a nearly linear increase at excitation frequencies below 1.0 Hz and then reached an almost constant value thereafter up to 10 Hz, which is different from the hybrid PVDF or its copolymer web. Furthermore, the dependency of the piezoelectric output on the excitation frequency was found to be influenced by the specific electrospinning process employed, which determined the crystalline structure of electrospun PVDF nanofibers. These findings suggest that determining an appropriate working frequency for randomly oriented electrospun PVDF nanofiber webs is essential before practical implementation, and the piezoelectric response mode in different mechanical activation frequency ranges can be used to detect different human physiological behaviors.
PubMed: 38932078
DOI: 10.3390/polym16121728 -
Polymers Jun 2024In this work, we focused on the bioactivity and antibacterial behavior of PLA-based electrospun fibers, efibers, reinforced with both MgO and Mg(OH) nanoparticles, NPs....
In this work, we focused on the bioactivity and antibacterial behavior of PLA-based electrospun fibers, efibers, reinforced with both MgO and Mg(OH) nanoparticles, NPs. The evolution of PLA-based efibers was followed in terms of morphology, FTIR, XRD, and visual appearance. The bioactivity was discussed in terms of hydroxyapatite growth after 28 days, considered as T28, of immersion in simulated body fluid, SBF. In particular, the biomineralization process evidenced after immersion in SBF started at T14 in both systems. The number of precipitated crystals increased by increasing the amount of both NPs. The chemical composition of the precipitated crystals was also characterized in terms of the Ca/P molar ratio after T28 of immersion in SBF, indicating the presence of hydroxyapatite on the surface of both reinforced efibers. Moreover, a reduction in the average diameter of the PLA-based efibers was observed, reaching a maximum reduction of 46 and 60% in the average diameter of neat PLA and PLA:OLA efibers, respectively, after 28 days of immersion in SBF. The antibacterial behavior of the MgO and Mg(OH) NPs in the PLA-based electrospun fibers was tested against , , as the Gram-negative bacteria, and , , as the Gram-positive bacteria, obtaining the best antibacterial activity against the Gram-negative bacteria of 21 ± 2% and 34 ± 6% for the highest concentration of MgO and Mg(OH) NPs, respectively.
PubMed: 38932077
DOI: 10.3390/polym16121727 -
Polymers Jun 2024Two crucial innovations-mastication and vulcanization-have revolutionized the use of rubber in our daily lives [...].
Two crucial innovations-mastication and vulcanization-have revolutionized the use of rubber in our daily lives [...].
PubMed: 38932076
DOI: 10.3390/polym16121726 -
Polymers Jun 2024The mechanical properties of textile materials play a crucial role in determining their comfort, functionality, performance, safety, and aesthetics. Understanding and...
The mechanical properties of textile materials play a crucial role in determining their comfort, functionality, performance, safety, and aesthetics. Understanding and optimizing these properties is essential to meet consumer demands. Key aspects of mechanical properties, such as surface roughness, abrasion resistance, and compression, have a significant impact on the touch and durability of the material, as demonstrated by various research studies. This study focuses on analyzing the mechanical properties of materials produced of different polymer yarns and their changes under combined aging factors. The findings emphasize the significance of textile abrasion resistance and surface roughness measurement, particularly for aged materials. Although the use of recycled polyester yarn is sustainable and offers advantages such as higher tensile strength, the results have shown that the use of conventional polyester yarn is more advantageous overall as it has higher abrasion resistance, a smoother surface texture, and better elasticity retention after aging. The insights presented are vital for designing high-performance sportswear, which is crucial in today's competitive environment.
PubMed: 38932075
DOI: 10.3390/polym16121725 -
Polymers Jun 2024The purpose of this study is to prepare monodisperse silica mesoporous microspheres with narrow pore size distribution to promote their application in the field of...
The purpose of this study is to prepare monodisperse silica mesoporous microspheres with narrow pore size distribution to promote their application in the field of liquid chromatography. An improved emulsion method was used to prepare silica mesoporous microspheres, and the rotary evaporation temperature, emulsification speed, dosage of porogen DMF, and dosage of the catalyst NH·HO were optimized. Subsequently, these microspheres were respectively treated by alkali-heating, calcination, and sieving. The D (particle size at the cumulative particle size distribution percentage of 50%) of as-prepared silica mesoporous microspheres is 26.3 μm, and the D/D (the ratio of particle size at a cumulative particle size distribution percentage of 90% to a cumulative particle size distribution percentage of 10%) is 1.94. The resultant silica mesoporous microspheres have distinctive pore structures, with a pore volume of more than 1.0 cm/g, an average pore size of 11.35 nm, and a median pore size of 13.4 nm. The silica mesoporous microspheres with a large particle size, uniform particle size distribution, large average pore size and pore volume, and narrow mesopore size distribution can basically meet the requirements of preparative liquid chromatographic columns.
PubMed: 38932074
DOI: 10.3390/polym16121724