-
Cell Reports Methods May 2024Organoids, self-organizing three-dimensional (3D) structures derived from stem cells, offer unique advantages for studying organ development, modeling diseases, and... (Review)
Review
Organoids, self-organizing three-dimensional (3D) structures derived from stem cells, offer unique advantages for studying organ development, modeling diseases, and screening potential therapeutics. However, their translational potential and ability to mimic complex in vivo functions are often hindered by the lack of an integrated vascular network. To address this critical limitation, bioengineering strategies are rapidly advancing to enable efficient vascularization of organoids. These methods encompass co-culturing organoids with various vascular cell types, co-culturing lineage-specific organoids with vascular organoids, co-differentiating stem cells into organ-specific and vascular lineages, using organoid-on-a-chip technology to integrate perfusable vasculature within organoids, and using 3D bioprinting to also create perfusable organoids. This review explores the field of organoid vascularization, examining the biological principles that inform bioengineering approaches. Additionally, this review envisions how the converging disciplines of stem cell biology, biomaterials, and advanced fabrication technologies will propel the creation of increasingly sophisticated organoid models, ultimately accelerating biomedical discoveries and innovations.
PubMed: 38759654
DOI: 10.1016/j.crmeth.2024.100779 -
Chemical Science May 2024Developing tunable materials which exhibit sustained drug release is a considerable challenge. Herein, we report the concept of Therapeutic Coordination Polymers (TCPs);...
Developing tunable materials which exhibit sustained drug release is a considerable challenge. Herein, we report the concept of Therapeutic Coordination Polymers (TCPs); non-porous coordination polymers constructed from biocompatible components which demonstrate tunable zero-order drug release kinetics upon degradation of metal-ligand bonds. TCPs were constructed from three principal components: (i) a cationic metal center (M = Mg, Mn, Zn, or Cu); (ii) an anionic drug (Diclofenac); and (iii) an alkyl bis-imidazole organic ligand which behaves as a "linker" between metal centers. Most drug-release materials, such as amorphous polymer dispersions, or metal-organic frameworks rely on a diffusion-based mechanism for drug release, but the degradation-controlled release of drugs from non-porous one-periodic coordination polymers has been largely unexplored. TCPs described herein exhibit a high wt% of pharmaceutical (>62%), tailorable zero-order drug release rate kinetics which span over three orders of magnitude, and stimuli-responsive drug release behavior making them well suited for extended drug-release applications.
PubMed: 38756811
DOI: 10.1039/d4sc00732h -
IScience May 2024Pulmonary embolism caused by deep vein thrombosis (DVT) is a major contributor to maternal morbidity and mortality. There is still an unmet need for safe and effective...
Pulmonary embolism caused by deep vein thrombosis (DVT) is a major contributor to maternal morbidity and mortality. There is still an unmet need for safe and effective treatment options for DVT during pregnancy. Recent research has shown that neutrophil extracellular trap (NET) formation plays a very vital role in thrombosis. We created nanoparticles surface-modified by neutrophil elastase (NE)-binding peptide that can target activated neutrophils specifically and . Prussian blue nanoparticles (PB NPs) designed in the core scavenges abnormally elevated reactive oxygen species (ROS) in the vascular microenvironment and acts as a photothermal agent to mediate photothermal therapy (PTT) to damage fibrin network structure. Based on the data we have included, this noninvasive therapeutic approach is considered safe for both mothers and the fetus. Furthermore, our findings indicate that this therapeutic approach has a significant alleviation effect on intrauterine growth restriction caused by maternal thrombosis.
PubMed: 38756418
DOI: 10.1016/j.isci.2024.109823 -
International Journal of Dentistry 2024The authors of this study proposed an innovative approach involving the use of Biodentine™ material as an intraorifice barrier in cracked teeth with root extension to...
PURPOSE
The authors of this study proposed an innovative approach involving the use of Biodentine™ material as an intraorifice barrier in cracked teeth with root extension to promote internal crack sealing, preventing the possibility of microinfiltration and apical crack propagation.
MATERIALS AND METHODS
The dental records of 11 patients with 12 posterior cracked teeth with root extension were included with a precise protocol performed by a senior endodontist. The treatment protocol included pulp diagnosis, crack identification using a dental operating microscope (DOM), endodontic treatment, placing a Biodentine™ as an intraorifice barrier, and immediate full-coverage restoration. The effectiveness of the treatment was assessed at two intervals, 6 months, and 1-3 years posttreatment, evaluating clinical, radiographic, and tomographic aspects. The treatment was deemed successful if there were no indications of radiolucency, sinus tracts, edema, or periodontal pockets associated with the crack line.
RESULTS
The study observed remarkably positive outcomes during the follow-up period, which spanned from 1 to 3 years. All the cracked teeth (100%) remained asymptomatic, meaning they were free of pain or discomfort. Furthermore, these teeth were in occlusal function. Both radiographic and tomographic assessments revealed the absence of bone loss along the crack line. This outcome signifies that the treatment effectively prevented further deterioration of the surrounding bone.
CONCLUSIONS
Integrating advanced biomaterials and conservative restorative techniques has paved the way for innovative approaches in dental care. This protocol suggests a proactive step for managing cracked teeth with root extension. It addresses both biological aspects by sealing internal cracks and mechanical aspects by preventing crack progression, thereby improving these teeth' prognosis and long-term survival.
PubMed: 38756384
DOI: 10.1155/2024/2234648 -
Bioactive Materials Aug 2024Fully bioresorbable vascular scaffolds (BVSs) aim to overcome the limitations of metallic drug-eluting stents (DESs). However, polymer-based BVSs, such as Abbott's...
Fully bioresorbable vascular scaffolds (BVSs) aim to overcome the limitations of metallic drug-eluting stents (DESs). However, polymer-based BVSs, such as Abbott's Absorb, the only US FDA-approved BVS, have had limited use due to increased strut thickness (157 μm for Absorb), exacerbated tissue inflammation, and increased risk of major cardiac events leading to inferior clinical performance when compared to metallic DESs. Herein we report the development of a drug-eluting BVS (DE-BVS) through the innovative use of a photopolymerizable, citrate-based biomaterial and a high-precision additive manufacturing process. BVS with a clinically relevant strut thickness of 62 μm can be produced in a high-throughput manner, i.e. one BVS per minute, and controlled release of the anti-restenosis drug everolimus can be achieved by engineering the structure of polymer coatings to fabricate drug-eluting BVS. We achieved the successful deployment of BVSs and DE-BVSs in swine coronary arteries using a custom-built balloon catheter and BVS delivery system and confirmed BVS safety and efficacy regarding maintenance of vessel patency for 28 days, observing an inflammation profile for BVS and DE-BVS that was comparable to the commercial XIENCE™ DES (Abbott Vascular).
PubMed: 38756202
DOI: 10.1016/j.bioactmat.2024.04.030 -
Journal of Nanobiotechnology May 2024Electrical stimulation (ES) is considered a promising therapy for chronic wounds via conductive dressing. However, the lack of a clinically suitable conductive dressing...
Electrical stimulation (ES) is considered a promising therapy for chronic wounds via conductive dressing. However, the lack of a clinically suitable conductive dressing is a serious challenge. In this study, a suitable conductive biomaterial with favorable biocompatibility and conductivity was screened by means of an inherent structure derived from the body based on electrical conduction in vivo. Ions condensed around the surface of the microtubules (MTs) derived from the cell's cytoskeleton are allowed to flow in the presence of potential differences, effectively forming a network of biological electrical wires, which is essential to the bioelectrical communication of cells. We hypothesized that MT dressing could improve chronic wound healing via the conductivity of MTs applied by ES. We first developed an MT-MAA hydrogel by a double cross-linking method using UV and calcium chloride to improve chronic wound healing by ES. In vitro studies showed good conductivity, mechanical properties, biocompatibility, and biodegradability of the MT-MAA hydrogel, as well as an elevated secretion of growth factors with enhanced cell proliferation and migration ability in response to ES. The in vivo experimental results from a full-thickness diabetic wound model revealed rapid wound closure within 7d in C57BL/6J mice, and the wound bed dressed by the MT-MAA hydrogel was shown to have promoted re-epithelization, enhanced angiogenesis, accelerated nerve growth, limited inflammation phases, and improved antibacterial effect under the ES treatment. These preclinical findings suggest that the MT-MAA hydrogel may be an ideal conductive dressing for chronic wound healing. Furthermore, biomaterials based on MTs may be also promising for treating other diseases.
Topics: Animals; Wound Healing; Hydrogels; Mice; Microtubules; Electric Conductivity; Mice, Inbred C57BL; Biocompatible Materials; Male; Humans; Electric Stimulation; Cell Proliferation; Cell Movement; Bandages
PubMed: 38755644
DOI: 10.1186/s12951-024-02524-2 -
Journal of Orthopaedic Surgery and... May 2024This study aims to evaluate the optimal ratio of synthetic bone graft (SBG) material and platelet rich fibrin (PRF) mixed in a metal 3D-printed implant to enhance bone...
BACKGROUND
This study aims to evaluate the optimal ratio of synthetic bone graft (SBG) material and platelet rich fibrin (PRF) mixed in a metal 3D-printed implant to enhance bone regeneration.
METHODS
Specialized titanium hollow implants (5 mm in diameter and 6 mm in height for rabbit; 6 mm in diameter and 5 mm in height for pig) were designed and manufactured using 3D printing technology. The implants were divided into three groups and filled with different bone graft combinations, namely (1) SBG alone; (2) PRF to SBG in 1:1 ratio; (3) PRF to SBG in 2:1 ratio. These three groups were replicated tightly into each bone defect in distal femurs of rabbits (nine implants, n = 3) and femoral shafts of pigs (fifteen implants, n = 5). Animal tissue sections were obtained after euthanasia at the 8th postoperative week. The rabbit specimens were stained with analine blue, while the pig specimens were stained with Masson-Goldner's trichrome stain to perform histologically examination. All titanium hollow implants were well anchored, except in fracture specimens (three in the rabbit and one fracture in the pig).
RESULT
Rabbit specimens under analine blue staining showed that collagen tissue increased by about 20% and 40% in the 1:1 ratio group and the 2:1 ratio group, respectively. Masson-Goldner's trichrome stain results showed that new bone growth increased by 32% in the 1:1 ratio PRF to SBG, while - 8% in the 2:1 ratio group.
CONCLUSION
This study demonstrated that placing a 1:1 ratio combination of PRF and SBG in a stabilized titanium 3D printed implant resulted in an optimal increase in bone growth.
Topics: Animals; Printing, Three-Dimensional; Rabbits; Platelet-Rich Fibrin; Bone Regeneration; Swine; Titanium; Femur; Bone Substitutes; Bone Transplantation; Prostheses and Implants
PubMed: 38755635
DOI: 10.1186/s13018-024-04784-y -
BMC Musculoskeletal Disorders May 2024Customized 3D-printed pelvic implants with a porous structure have revolutionized periacetabular pelvic defect reconstruction after tumor resection, offering improved...
BACKGROUND
Customized 3D-printed pelvic implants with a porous structure have revolutionized periacetabular pelvic defect reconstruction after tumor resection, offering improved osteointegration, long-term stability, and anatomical fit. However, the lack of an established classification system hampers implementation and progress.
METHODS
We formulated a novel classification system based on pelvic defect morphology and 3D-printed hemipelvis endoprostheses. It integrates surgical approach, osteotomy guide plate and prosthesis design, postoperative rehabilitation plans, and perioperative processes.
RESULTS
Retrospectively analyzing 60 patients (31 males, 29 females), we classified them into Type A (15 patients: Aa = 6, Ab = 9), Type B (27 patients: Ba = 15, Bb = 12), Type C (17 patients). All underwent customized osteotomy guide plate-assisted tumor resection and 3D-printed hemipelvic endoprosthesis reconstruction. Follow-up duration was median 36.5 ± 15.0 months (range, 6 to 74 months). The mean operating time was 430.0 ± 106.7 min, intraoperative blood loss 2018.3 ± 1305.6 ml, transfusion volume 2510.0 ± 1778.1 ml. Complications occurred in 13 patients (21.7%), including poor wound healing (10.0%), deep prosthesis infection (6.7%), hip dislocation (3.3%), screw fracture (1.7%), and interface loosening (1.7%). VAS score improved from 5.5 ± 1.4 to 1.7 ± 1.3, MSTS-93 score from 14.8 ± 2.5 to 23.0 ± 5.6. Implant osseointegration success rate was 98.5% (128/130), with one Type Ba patient experiencing distal prosthesis loosening.
CONCLUSION
The West China classification may supplement the Enneking and Dunham classification, enhancing interdisciplinary communication and surgical outcomes. However, further validation and wider adoption are required to confirm clinical effectiveness.
Topics: Humans; Female; Printing, Three-Dimensional; Male; Retrospective Studies; Adult; Middle Aged; Acetabulum; Bone Neoplasms; Prosthesis Design; Young Adult; Osteotomy; Plastic Surgery Procedures; Adolescent; Aged; Treatment Outcome; Postoperative Complications; Follow-Up Studies; Pelvic Bones
PubMed: 38755628
DOI: 10.1186/s12891-024-07509-8 -
Scientific Reports May 2024The underutilization of digestate-derived polymers presents a pressing environmental concern as these valuable materials, derived from anaerobic digestion processes,...
The underutilization of digestate-derived polymers presents a pressing environmental concern as these valuable materials, derived from anaerobic digestion processes, remain largely unused, contributing to pollution and environmental degradation when left unutilized. This study explores the recovery and utilization of biodegradable polymers from biomass anaerobic digestate to enhance the performance of solar photovoltaic (PV) cells while promoting environmental sustainability. The anaerobic digestion process generates organic residues rich in biodegradable materials, often considered waste. However, this research investigates the potential of repurposing these materials by recovering and transforming them into high-quality coatings or encapsulants for PV cells. The recovered biodegradable polymers not only improve the efficiency and lifespan of PV cells but also align with sustainability objectives by reducing the carbon footprint associated with PV cell production and mitigating environmental harm. The study involves a comprehensive experimental design, varying coating thickness, direct normal irradiance (DNI) (A), dry bulb temperature (DBT) (B), and relative humidity (C) levels to analyze how different types of recovered biodegradable polymers interact with diverse environmental conditions. Optimization showed that better result was achieved at A = 8 W/m, B = 40 °C and C = 70% for both the coated material studied. Comparative study showed that for enhanced cell efficiency and cost effectiveness, EcoPolyBlend coated material is more suited however for improving durability and reducing environmental impact NanoBioCelluSynth coated material is preferable choice. Results show that these materials offer promising improvements in PV cell performance and significantly lower environmental impact, providing a sustainable solution for renewable energy production. This research contributes to advancing both the utilization of biomass waste and the development of eco-friendly PV cell technologies, with implications for a more sustainable and greener energy future. This study underscores the pivotal role of exploring anaerobic digestate-derived polymers in advancing the sustainability and performance of solar photovoltaic cells, addressing critical environmental and energy challenges of our time.Please confirm if the author names are presented accurately and in the correct sequence (given name, middle name/initial, family name). Author 7 Given name: [Ashok] Last name [Kumar Yadav]. Also, kindly confirm the details in the metadata are correct.correct.
Topics: Biomass; Solar Energy; Polymers; Recycling; Anaerobiosis
PubMed: 38755253
DOI: 10.1038/s41598-024-62048-5 -
Nature Communications May 2024The regeneration of critical-size bone defects, especially those with irregular shapes, remains a clinical challenge. Various biomaterials have been developed to enhance...
The regeneration of critical-size bone defects, especially those with irregular shapes, remains a clinical challenge. Various biomaterials have been developed to enhance bone regeneration, but the limitations on the shape-adaptive capacity, the complexity of clinical operation, and the unsatisfied osteogenic bioactivity have greatly restricted their clinical application. In this work, we construct a mechanically robust, tailorable and water-responsive shape-memory silk fibroin/magnesium (SF/MgO) composite scaffold, which is able to quickly match irregular defects by simple trimming, thus leading to good interface integration. We demonstrate that the SF/MgO scaffold exhibits excellent mechanical stability and structure retention during the degradative process with the potential for supporting ability in defective areas. This scaffold further promotes the proliferation, adhesion and migration of osteoblasts and the osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) in vitro. With suitable MgO content, the scaffold exhibits good histocompatibility, low foreign-body reactions (FBRs), significant ectopic mineralisation and angiogenesis. Skull defect experiments on male rats demonstrate that the cell-free SF/MgO scaffold markedly enhances bone regeneration of cranial defects. Taken together, the mechanically robust, personalised and bioactive scaffold with water-responsive shape-memory may be a promising biomaterial for clinical-size and irregular bone defect regeneration.
Topics: Fibroins; Bone Regeneration; Animals; Tissue Scaffolds; Male; Osteogenesis; Mesenchymal Stem Cells; Rats; Magnesium; Biocompatible Materials; Osteoblasts; Cell Differentiation; Rats, Sprague-Dawley; Water; Cell Proliferation; Tissue Engineering; Skull; Cell Adhesion; Bombyx
PubMed: 38755128
DOI: 10.1038/s41467-024-48417-8