-
Microbiology and Molecular Biology... Sep 2002Fundamental features of microbial cellulose utilization are examined at successively higher levels of aggregation encompassing the structure and composition of... (Review)
Review
Fundamental features of microbial cellulose utilization are examined at successively higher levels of aggregation encompassing the structure and composition of cellulosic biomass, taxonomic diversity, cellulase enzyme systems, molecular biology of cellulase enzymes, physiology of cellulolytic microorganisms, ecological aspects of cellulase-degrading communities, and rate-limiting factors in nature. The methodological basis for studying microbial cellulose utilization is considered relative to quantification of cells and enzymes in the presence of solid substrates as well as apparatus and analysis for cellulose-grown continuous cultures. Quantitative description of cellulose hydrolysis is addressed with respect to adsorption of cellulase enzymes, rates of enzymatic hydrolysis, bioenergetics of microbial cellulose utilization, kinetics of microbial cellulose utilization, and contrasting features compared to soluble substrate kinetics. A biological perspective on processing cellulosic biomass is presented, including features of pretreated substrates and alternative process configurations. Organism development is considered for "consolidated bioprocessing" (CBP), in which the production of cellulolytic enzymes, hydrolysis of biomass, and fermentation of resulting sugars to desired products occur in one step. Two organism development strategies for CBP are examined: (i) improve product yield and tolerance in microorganisms able to utilize cellulose, or (ii) express a heterologous system for cellulose hydrolysis and utilization in microorganisms that exhibit high product yield and tolerance. A concluding discussion identifies unresolved issues pertaining to microbial cellulose utilization, suggests approaches by which such issues might be resolved, and contrasts a microbially oriented cellulose hydrolysis paradigm to the more conventional enzymatically oriented paradigm in both fundamental and applied contexts.
Topics: Bacteria; Biomass; Biotechnology; Cellulose; Enzymes; Gene Expression Regulation; Genetic Engineering; Hydrolysis; Yeasts
PubMed: 12209002
DOI: 10.1128/MMBR.66.3.506-577.2002 -
The New Phytologist Mar 2019Contents Summary 1703 I. Introduction 1703 II. Cellulose biosynthesis 1705 III. Xylan biosynthesis 1709 IV. Glucomannan biosynthesis 1713 V. Lignin biosynthesis 1714 VI.... (Review)
Review
Contents Summary 1703 I. Introduction 1703 II. Cellulose biosynthesis 1705 III. Xylan biosynthesis 1709 IV. Glucomannan biosynthesis 1713 V. Lignin biosynthesis 1714 VI. Concluding remarks 1717 Acknowledgements 1717 References 1717 SUMMARY: Secondary walls are synthesized in specialized cells, such as tracheary elements and fibers, and their remarkable strength and rigidity provide strong mechanical support to the cells and the plant body. The main components of secondary walls are cellulose, xylan, glucomannan and lignin. Biochemical, molecular and genetic studies have led to the discovery of most of the genes involved in the biosynthesis of secondary wall components. Cellulose is synthesized by cellulose synthase complexes in the plasma membrane and the recent success of in vitro synthesis of cellulose microfibrils by a single recombinant cellulose synthase isoform reconstituted into proteoliposomes opens new doors to further investigate the structure and functions of cellulose synthase complexes. Most genes involved in the glycosyl backbone synthesis, glycosyl substitutions and acetylation of xylan and glucomannan have been genetically characterized and the biochemical properties of some of their encoded enzymes have been investigated. The genes and their encoded enzymes participating in monolignol biosynthesis and modification have been extensively studied both genetically and biochemically. A full understanding of how secondary wall components are synthesized will ultimately enable us to produce plants with custom-designed secondary wall composition tailored to diverse applications.
Topics: Cell Wall; Cellulose; Glucosyltransferases; Lignin; Plant Cells; Plant Proteins; Protein Domains; Xylans
PubMed: 30312479
DOI: 10.1111/nph.15537 -
Molecules (Basel, Switzerland) Sep 2022The search for alternative methods for the production of new materials or fuel from renewable and sustainable biomass feedstocks has gained increasing attention. In this...
The search for alternative methods for the production of new materials or fuel from renewable and sustainable biomass feedstocks has gained increasing attention. In this study, (nipa palm) fronds from agricultural residues were evaluated to produce pure cellulose by combining prehydrolysis for 1-3 h at 150 °C, sulfur-free soda cooking for 1-1.5 h at 160 °C with 13-25% active alkali (AA), 0.1% soluble anthraquinone (SAQ) catalyst, and three-stage totally chlorine-free (TCF) bleaching, namely oxygen, peroxymonosulfuric acid, and alkaline hydrogen peroxide stages. The optimal conditions were 3 h prehydrolysis and 1.5 h cooking with 20% AA. Soda cooking with SAQ was better than the kraft and soda process without SAQ. The method decreased the kappa number as a residual lignin content index of pulp from 13.4 to 9.9-10.2 and improved the yields by approximately 6%. The TCF bleaching application produced pure cellulose with a brightness of 92.2% ISO, 94.8% α-cellulose, viscosity of 7.9 cP, and 0.2% ash content. These findings show that nipa palm fronds can be used to produce pure cellulose, serving as a dissolving pulp grade for viscose rayon and cellulose derivatives.
Topics: Alkalies; Cellulose; Chlorine; Hydrogen Peroxide; Lignin; Paper
PubMed: 36080429
DOI: 10.3390/molecules27175662 -
Essays in Biochemistry Apr 2023Lignocellulosic biomass is the most abundant source of carbon-based material on a global basis, serving as a raw material for cellulosic fibers, hemicellulosic polymers,... (Review)
Review
Lignocellulosic biomass is the most abundant source of carbon-based material on a global basis, serving as a raw material for cellulosic fibers, hemicellulosic polymers, platform sugars, and lignin resins or monomers. In nature, the various components of lignocellulose (primarily cellulose, hemicellulose, and lignin) are decomposed by saprophytic fungi and bacteria utilizing specialized enzymes. Enzymes are specific catalysts and can, in many cases, be produced on-site at lignocellulose biorefineries. In addition to reducing the use of often less environmentally friendly chemical processes, the application of such enzymes in lignocellulose processing to obtain a range of specialty products can maximize the use of the feedstock and valorize many of the traditionally underutilized components of lignocellulose, while increasing the economic viability of the biorefinery. While cellulose has a rich history of use in the pulp and paper industries, the hemicellulosic fraction of lignocellulose remains relatively underutilized in modern biorefineries, among other reasons due to the heterogeneous chemical structure of hemicellulose polysaccharides, the composition of which varies significantly according to the feedstock and the choice of pretreatment method and extraction solvent. This paper reviews the potential of hemicellulose in lignocellulose processing with focus on what can be achieved using enzymatic means. In particular, we discuss the various enzyme activities required for complete depolymerization of the primary hemicellulose types found in plant cell walls and for the upgrading of hemicellulosic polymers, oligosaccharides, and pentose sugars derived from hemicellulose depolymerization into a broad spectrum of value-added products.
Topics: Lignin; Cellulose; Biomass; Sugars
PubMed: 37068264
DOI: 10.1042/EBC20220154 -
Advances in Colloid and Interface... Jun 2022Polymeric materials play a vital role in our daily life, but the growing concern for the environment demands economical and natural biopolymers that can be cross-linked... (Review)
Review
Polymeric materials play a vital role in our daily life, but the growing concern for the environment demands economical and natural biopolymers that can be cross-linked to create technologically innovative lightweight materials. Their cellular matrix with extreme flexibility makes them highly acceptable for application prospects in material science, engineering, and biomedical applications. Furthermore, their biocompatibility, mechanical properties, and structural diversity provide a gateway to research them to form technologically important materials. In the light of the same, the review covers cellulose derivatives. The first section of the study covers the general properties and applications of cellulose and its derivatives. Then, the biopolymers are characterised based on their dielectric properties, crystallinity, rheology, and mechanical properties. An in-depth analysis of the diffuse process of swelling and dissolution followed by a brief discussion on diffusion and diffusion of crosslinking has been done. The review also covers a section on swelling and swelling kinetics of carboxymethyl cellulose (CMC) and hydroxyethyl cellulose (HEC). The examination of all the aforementioned parameters gives an insight into the future aspects of the biopolymers. Lastly, the study briefly covers some preferred choices of cross-linking agents and their effect on the biopolymers.
Topics: Biopolymers; Carboxymethylcellulose Sodium; Cellulose; Hydrogels; Rheology
PubMed: 35483124
DOI: 10.1016/j.cis.2022.102681 -
Molecules (Basel, Switzerland) May 2015A short review with 49 references describes the electrospinninng (ES) process for polysaccharides, cellulose and chitosan, and their derivatives, including cellulose... (Review)
Review
A short review with 49 references describes the electrospinninng (ES) process for polysaccharides, cellulose and chitosan, and their derivatives, including cellulose acetate and hydroxypropyl cellulose. A majority of applied studies adopted a two step-process, in which the cellulose acetate was used for the first ES process, followed by acetyl group removal to regenerate cellulose thin fibers. The electrospun nonwoven fabrics (ESNW) of regenerated cellulose can be modified by introduction of aldehyde groups by oxidative cleavage of vicinal diols using periodates, and these aldehyde groups serve as acceptors of foreign substances, with various chemical/biological functions, to be immobilized on the fiber surfaces in the ESNW matrices. Direct electrospinning of cellulose from trifluroacetic acid solution was also developed and the applied studies were summarized to conclude the current trends of interests in the ES and related technologies.
Topics: Cellulose; Chitosan; Manufactured Materials; Microscopy, Electron, Scanning; Nanofibers; Polysaccharides
PubMed: 25996216
DOI: 10.3390/molecules20059139 -
International Journal of Molecular... Apr 2022Rapid population and economic growth, excessive use of fossil fuels, and climate change have contributed to a serious turn towards environmental management and... (Review)
Review
Rapid population and economic growth, excessive use of fossil fuels, and climate change have contributed to a serious turn towards environmental management and sustainability. The agricultural sector is a big contributor to (lignocellulosic) waste, which accumulates in landfills and ultimately gets burned, polluting the environment. In response to the current climate-change crisis, policymakers and researchers are, respectively, encouraging and seeking ways of creating value-added products from generated waste. Recently, agricultural waste has been regularly appearing in articles communicating the production of a range of carbon and polymeric materials worldwide. The extraction of cellulose nanocrystals (CNCs) and carbon quantum dots (CQDs) from biomass waste partially occupies some of the waste-recycling and management space. Further, the new materials generated from this waste promise to be effective and competitive in emerging markets. This short review summarizes recent work in the area of CNCs and CQDs synthesised from biomass waste. Synthesis methods, properties, and prospective application of these materials are summarized. Current challenges and the benefits of using biomass waste are also discussed.
Topics: Biomass; Carbon; Cellulose; Lignin; Nanoparticles
PubMed: 35457128
DOI: 10.3390/ijms23084310 -
Biomacromolecules Jun 2023The development of wood-based thermoplastic polymers that can replace synthetic plastics is of high environmental importance, and previous studies have indicated that...
The development of wood-based thermoplastic polymers that can replace synthetic plastics is of high environmental importance, and previous studies have indicated that cellulose-rich fiber containing dialcohol cellulose (ring-opened cellulose) is a very promising candidate material. In this study, molecular dynamics simulations, complemented with experiments, were used to investigate how and why the degree of ring opening influences the properties of dialcohol cellulose, and how temperature and presence of water affect the material properties. Mechanical tensile properties, diffusion/mobility-related properties, densities, glass-transition temperatures, potential energies, hydrogen bonds, and free volumes were simulated for amorphous cellulosic materials with 0-100% ring opening, at ambient and high (150 °C) temperatures, with and without water. The simulations showed that the impact of ring openings, with respect to providing molecular mobility, was higher at high temperatures. This was also observed experimentally. Hence, the ring opening had the strongest beneficial effect on "processability" (reduced stiffness and strength) above the glass-transition temperature and in wet conditions. It also had the effect of lowering the glass-transition temperature. The results here showed that molecular dynamics is a valuable tool in the development of wood-based materials with optimal thermoplastic properties.
Topics: Cellulose; Molecular Dynamics Simulation; Plastics; Transition Temperature; Water
PubMed: 37166024
DOI: 10.1021/acs.biomac.3c00156 -
Carbohydrate Polymers Jun 2022The implementation of cellulose as a green alternative to classical polymers sparks research on the synthesis of defined derivatives of this biopolymer for various... (Review)
Review
The implementation of cellulose as a green alternative to classical polymers sparks research on the synthesis of defined derivatives of this biopolymer for various high-tech applications. Apart from the scientific challenge, the in vitro synthesis of cellulose using a bottom-up approach provides specimens with absolutely accurate substituent patterns and degrees of polymerization, not accessible from native cellulose. Synthetic cellulose exhibiting a comparably high degree of polymerization (DP) was obtained starting from cellobiose by biocatalytic synthesis implementing cellulase. Cationic ring-opening polymerization has been established in the last two decades, representing an excellent means of precise modification with regards to regio- and stereoselective substitution. This method rendered isotopically enriched cellulose as well as enantiomers of native cellulose ("l-cellulose", "d,l-cellulose") accessible. In this review, techniques for in vitro cellulose synthesis are summarized and critically compared - with a special focus on more recent developments. This is complemented by a brief overview of alternative enzymatic approaches.
Topics: Cellobiose; Cellulase; Cellulose; Polymers; Stereoisomerism
PubMed: 35287852
DOI: 10.1016/j.carbpol.2022.119222 -
Molecules (Basel, Switzerland) Oct 2022(SM) was investigated as a primary source of cellulose with the aim of discovering resources to generate cellulose nanofibers (CNF). The SM was put through a soda...
(SM) was investigated as a primary source of cellulose with the aim of discovering resources to generate cellulose nanofibers (CNF). The SM was put through a soda pulping process to purify the cellulose, and then, the fiber was treated with an enzymatic treatment. Then, a twin-screw extruder and/or masuko were utilized to help with fiber delamination during the nanofibrillation process. After the enzymatic treatment, the twin-screw extruder and masuko treatment give a yield of 49.6 and 50.2%, respectively. The optical and atomic force microscopy, morfi, and polymerization degrees of prepared cellulosic materials were established. The pulp fibers, collected following each treatment stage, demonstrated that fiber characteristics such as length and crystallinity varied according to the used treatment (mechanical or enzymatic treatment). Obviously, the enzymic treatment resulted in shorter fibers and an increased degree of polymerization. However, the CNF obtained after enzymatic and extrusion treatment was achieved, and it gave 19 nm as the arithmetic width and a Young's modulus of 8.63 GPa.
Topics: Anacardiaceae; Cellulose; Elastic Modulus; Nanofibers; Polymerization
PubMed: 36235273
DOI: 10.3390/molecules27196738