-
Current Biology : CB Feb 2022In this Quick guide, Derek Lovley introduces microbial nanowires-conductive extracellular appendages made by some bacteria and archaea.
In this Quick guide, Derek Lovley introduces microbial nanowires-conductive extracellular appendages made by some bacteria and archaea.
Topics: Bacteria; Electric Conductivity; Electron Transport; Fimbriae, Bacterial; Nanowires
PubMed: 35134353
DOI: 10.1016/j.cub.2021.12.019 -
Biosensors Sep 2023Biological parameters extracted from electrical signals from various body parts have been used for many years to analyze the human body and its behavior. In addition,... (Review)
Review
Biological parameters extracted from electrical signals from various body parts have been used for many years to analyze the human body and its behavior. In addition, electrical signals from cancer cell lines, normal cells, and viruses, among others, have been widely used for the detection of various diseases. Single-cell parameters such as cell and cytoplasmic conductivity, relaxation frequency, and membrane capacitance are important. There are many techniques available to characterize biomaterials, such as nanotechnology, microstrip cavity resonance measurement, etc. This article reviews single-cell isolation and sorting techniques, such as the micropipette separation method, separation and sorting system (dual electrophoretic array system), DEPArray sorting system (dielectrophoretic array system), cell selector sorting system, and microfluidic and valve devices, and discusses their respective advantages and disadvantages. Furthermore, it summarizes common single-cell electrical manipulations, such as single-cell amperometry (SCA), electrical impedance sensing (EIS), impedance flow cytometry (IFC), cell-based electrical impedance (CEI), microelectromechanical systems (MEMS), and integrated microelectrode array (IMA). The article also enumerates the application and significance of single-cell electrochemical analysis from the perspectives of CTC liquid biopsy, recombinant adenovirus, tumor cells like lung cancer DTCs (LC-DTCs), and single-cell metabolomics analysis. The paper concludes with a discussion of the current limitations faced by single-cell analysis techniques along with future directions and potential application scenarios.
Topics: Humans; Cell Separation; Flow Cytometry; Electricity; Electric Conductivity; Electric Impedance; Single-Cell Analysis; Microfluidic Analytical Techniques
PubMed: 37887100
DOI: 10.3390/bios13100907 -
Scientific Reports Feb 2020Memristors represent the fourth electrical circuit element complementing resistors, capacitors and inductors. Hallmarks of memristive behavior include pinched and...
Memristors represent the fourth electrical circuit element complementing resistors, capacitors and inductors. Hallmarks of memristive behavior include pinched and frequency-dependent I-V hysteresis loops and most importantly a functional dependence of the magnetic flux passing through an ideal memristor on its electrical charge. Microtubules (MTs), cylindrical protein polymers composed of tubulin dimers are key components of the cytoskeleton. They have been shown to increase solution's ionic conductance and re-orient in the presence of electric fields. It has been hypothesized that MTs also possess intrinsic capacitive and inductive properties, leading to transistor-like behavior. Here, we show a theoretical basis and experimental support for the assertion that MTs under specific circumstances behave consistently with the definition of a memristor. Their biophysical properties lead to pinched hysteretic current-voltage dependence as well a classic dependence of magnetic flux on electric charge. Based on the information about the structure of MTs we provide an estimate of their memristance. We discuss its significance for biology, especially neuroscience, and potential for nanotechnology applications.
Topics: Biophysical Phenomena; Electric Conductivity; Electric Impedance; Microtubules; Nanotechnology; Neural Networks, Computer; Tubulin
PubMed: 32034179
DOI: 10.1038/s41598-020-58820-y -
International Journal of Molecular... Jul 2023In the past few decades, conjugated organic oligomers and polymers have been shown to have amazing properties, such as conductivity, which were traditionally considered...
In the past few decades, conjugated organic oligomers and polymers have been shown to have amazing properties, such as conductivity, which were traditionally considered counterintuitive for macromolecules consistently used as plastics and fibers (and thus, insulators) until the late 1970s [...].
Topics: Polymers; Plastics; Macromolecular Substances; Electric Conductivity
PubMed: 37511381
DOI: 10.3390/ijms241411623 -
International Journal of Molecular... Jul 2023Graphene is the first two-dimensional material that becomes the center material in various research areas of material science, chemistry, condensed matter, and... (Review)
Review
Graphene is the first two-dimensional material that becomes the center material in various research areas of material science, chemistry, condensed matter, and engineering due to its advantageous properties, including larger specific area, lower density, outstanding electrical conductivity, and ease of processability. These properties attracted the attention of material researchers that resulted in a large number of publications on EMI shielding in a short time and play a central role in addressing the problems and challenges faced in this modern era of electronics by electromagnetic interference. After the popularity of graphene, the community of material researchers investigated other two-dimensional materials like MXenes, hexagonal boron nitride, black phosphorous, transition metal dichalcogenides, and layered double hydroxides, to additionally enhance the EMI shielding response of materials. The present article conscientiously reviews the current progress in EMI shielding materials in reference to two-dimensional materials and addresses the future challenges and research directions to achieve the goals.
Topics: Graphite; Electric Conductivity; Electronics; Phosphorus
PubMed: 37569645
DOI: 10.3390/ijms241512267 -
The Cochrane Database of Systematic... Mar 2021Caries is one of the most prevalent, preventable conditions worldwide. A wide variety of management options are available at different thresholds of disease, ranging... (Meta-Analysis)
Meta-Analysis
BACKGROUND
Caries is one of the most prevalent, preventable conditions worldwide. A wide variety of management options are available at different thresholds of disease, ranging from non-operative preventive strategies such as improved oral hygiene, reduced sugar diet, and application of topical fluoride, to minimally invasive treatments for early lesions which are limited to enamel, through to selective removal and restoration for extensive lesions. The cornerstone of caries detection is a visual and tactile dental examination, however, an increasing array of methods of caries lesion detection have been proposed that could potentially support traditional methods of detection and diagnosis. Earlier identification of disease could afford patients the opportunity of less invasive treatment with less destruction of tooth tissue, reduce the need for treatment with aerosol-generating procedures, and potentially result in a reduced cost of care to the patient and to healthcare services.
OBJECTIVES
Our primary objective was to determine the diagnostic accuracy of different electrical conductance devices for the detection and diagnosis of non-cavitated coronal dental caries in different populations (children, adolescents, and adults) and when tested against different reference standards.
SEARCH METHODS
Cochrane Oral Health's Information Specialist undertook a search of the following databases: MEDLINE Ovid (1946 to 26 April 2019); Embase Ovid (1980 to 26 April 2019); US National Institutes of Health Ongoing Trials Register (ClinicalTrials.gov, to 26 April 2019); and the World Health Organization International Clinical Trials Registry Platform (to 26 April 2019). We studied reference lists as well as published systematic review articles.
SELECTION CRITERIA
We included diagnostic accuracy studies that compared electrical conductance devices with a reference standard of histology or an enhanced visual examination. This included prospective studies that evaluated the diagnostic accuracy of single index tests and studies that directly compared two or more index tests. We included studies using previously extracted teeth or those that recruited participants with teeth believed to be sound or with early lesions limited to enamel. Studies that explicitly recruited participants with more advanced lesions that were obviously into dentine or frankly cavitated were excluded.
DATA COLLECTION AND ANALYSIS
Two review authors extracted data independently using a piloted study data extraction form based on the Quality Assessment of Diagnostic Accuracy Studies 2 (QUADAS-2). Sensitivity and specificity with 95% confidence intervals (CIs) were reported for each study. This information was displayed as coupled forest plots, and plotted as summary receiver operating characteristic (SROC) plots, displaying the sensitivity-specificity points for each study. Due to variability in thresholds we estimated diagnostic accuracy using hierarchical summary receiver operating characteristic (HSROC) methods.
MAIN RESULTS
We included seven studies reporting a total of 719 tooth sites or surfaces, with an overall prevalence of the target condition of 73% (528 tooth sites or surfaces). The included studies evaluated two index tests: the electronic caries monitor (ECM) (four studies, 475 tooth surfaces) and CarieScan Pro (three studies, 244 tooth surfaces). Six studies used histology as the reference standard, one used an enhanced visual examination. No study was considered to be at low risk of bias across all four domains or low concern for applicability or both. All studies were at high (five studies) or unclear (two studies) risk of bias for the patient selection domain. We judged two studies to be at unclear risk of bias for the index test domain, and one study to be at high risk of bias for the reference standard and flow and timing domains. We judged three studies to be at low concern for applicability for patient selection, and all seven studies to be of low concern for reference standard and flow and timing domains. Studies were synthesised using a hierarchical method for meta-analysis. There was variability in the results of the individual studies, with sensitivities which ranged from 0.55 to 0.98 and specificities from 0 to 1.00. These extreme values of specificity may be explained by a low number of healthy tooth surfaces in the included samples. The diagnostic odds ratio (DOR) was 15.65 (95% CI 1.43 to 171.15), and indicative of the variability in the included studies. Through meta-regression we observed no meaningful difference in accuracy according to device type or dentition. Due to the small number of studies we were unable to formally investigate other potential sources of heterogeneity. We judged the certainty of the evidence as very low, and downgraded for risk of bias due to limitations in the design and conduct of the included studies, imprecision arising from the relatively small number of surfaces studied, and inconsistency due to the variability of results.
AUTHORS' CONCLUSIONS
The design and conduct of studies to determine the diagnostic accuracy of methods to detect and diagnose caries in situ is particularly challenging. The evidence base to support the detection and diagnosis of caries with electrical conductance devices is sparse. Newer electrical conductance devices show promise and further research at the enamel caries threshold using a robust study design to minimise bias is warranted. In terms of applicability, any future studies should be carried out in a clinical setting to provide a realistic assessment within the oral cavity where plaque, staining, and restorations can be problematic.
Topics: Adolescent; Adult; Child; Confidence Intervals; Dental Caries; Dental Instruments; Electric Conductivity; Humans; Prospective Studies; Reference Standards; Sensitivity and Specificity
PubMed: 33724442
DOI: 10.1002/14651858.CD014547 -
Toxicology in Vitro : An International... Sep 2018In vitro skin permeation studies are commonly used in the risk assessment of toxic compound skin exposure. The present study examined the utility of transepidermal water...
In vitro skin permeation studies are commonly used in the risk assessment of toxic compound skin exposure. The present study examined the utility of transepidermal water loss (TEWL) and electrical conductance as barrier integrity tests before skin permeation studies in vitro using a large number of skin samples and fentanyl. TEWL and conductance of the skin samples were measured before the permeation experiments in Franz diffusion cells in vitro with a vapometer and low voltage application, respectively. The data were analyzed based on the in vitro permeation results and in vivo skin absorption information from the transdermal fentanyl product labels. The results showed poor correlations between TEWL and electrical conductance for the skin samples. Weak correlations between fentanyl delivery rate (flux x area) and TEWL and skin conductance were observed. For comparison, TEWL and conductance were also examined after skin perturbation with a syringe needle, and both TEWL and conductance values of the skin samples increased after the perturbation. The data suggest that either TEWL of 10 g/m/h or skin conductance of 0.07 mS/cm can be used as exclusion criteria in skin integrity testing to remove skin samples with high permeabilities under the in vitro conditions studied.
Topics: Aged; Anesthetics; Electric Conductivity; Female; Fentanyl; Humans; In Vitro Techniques; Male; Middle Aged; Permeability; Skin; Toxicity Tests; Transdermal Patch; Water; Water Loss, Insensible
PubMed: 29698667
DOI: 10.1016/j.tiv.2018.04.009 -
International Journal of Molecular... Apr 2023The most promising energy storage devices are lithium-sulfur batteries (LSBs), which offer a high theoretical energy density that is five times greater than that of... (Review)
Review
The most promising energy storage devices are lithium-sulfur batteries (LSBs), which offer a high theoretical energy density that is five times greater than that of lithium-ion batteries. However, there are still significant barriers to the commercialization of LSBs, and mesoporous carbon-based materials (MCBMs) have attracted much attention in solving LSBs' problems, due to their large specific surface area (SSA), high electrical conductivity, and other unique advantages. The synthesis of MCBMs and their applications in the anodes, cathodes, separators, and "two-in-one" hosts of LSBs are reviewed in this study. Most interestingly, we establish a systematic correlation between the structural characteristics of MCBMs and their electrochemical properties, offering recommendations for improving performance by altering the characteristics. Finally, the challenges and opportunities of LSBs under current policies are also clarified. This review provides ideas for the design of cathodes, anodes, and separators for LSBs, which could have a positive impact on the performance enhancement and commercialization of LSBs. The commercialization of high energy density secondary batteries is of great importance for the achievement of carbon neutrality and to meet the world's expanding energy demand.
Topics: Lithium; Carbon; Electric Conductivity; Electric Power Supplies; Sulfur
PubMed: 37108464
DOI: 10.3390/ijms24087291 -
Chinese Journal of Integrative Medicine Aug 2021Early studies from several independent laboratories demonstrated that acupoints possess the characteristics of low electrical resistance. New devices are developing to...
Early studies from several independent laboratories demonstrated that acupoints possess the characteristics of low electrical resistance. New devices are developing to increase the reliability of electrical skin impedance measurements for counteracting the factors including skin dryness, skin thickness, size of the sensing electrode, pressure applied on the electrode, interelectrode distance, room temperature, and humidity. Morphological studies have identified that blood vessels, hair follicles, and nervous components are enhanced in the meridians/acupoints, which represent areas of potentially high neuronal activity. Recent evidence shows that nitric oxide (NO) concentrations are enhanced in skin acupoints/meridians. L-arginine-derived NO synthesis modifies skin norepinephrine (NE) synthesis/release in acupoints/meridians, and NO-NE activations play an important role in mediating the skin conductance responses to electrical stimulation. NOergic signaling molecules interact with gap junction and transient receptor potential vanilloid type-1. Other studies reported that the high conductance at acupoints is a result of the release of the neuropeptides substance P and calcitonin gene-related peptide during neurogenic inflammation in the referred pain area. Pathological body conditions caused considerable changes in skin conductance or impedance at acupoints. Although systematic research with an improved equipment and research design to avoid the influencing factors are requested for a definite answer in this field, the results from anatomical and biochemical studies consistently show that acupoints exist higher levels of nervous components, and NOergic signaling molecules and neuropeptides involved in the skin low resistance at acupoints. The increased interest in the acupoints/meridians has led to an open-minded attitude towards understanding this system, which is fundamental important to establish the valid aspects of scientific basis of Chinese medicine mechanisms and therapies.
Topics: Acupuncture Points; Electric Impedance; Meridians; Neuropeptides; Reproducibility of Results
PubMed: 34319572
DOI: 10.1007/s11655-021-3318-5 -
Journal of Physics. Condensed Matter :... Aug 2011Despite an extensive research effort for over 60 years, an understanding of the origins of conductivity in wide band gap transparent conducting oxide (TCO)... (Review)
Review
Despite an extensive research effort for over 60 years, an understanding of the origins of conductivity in wide band gap transparent conducting oxide (TCO) semiconductors remains elusive. While TCOs have already found widespread use in device applications requiring a transparent contact, there are currently enormous efforts to (i) increase the conductivity of existing materials, (ii) identify suitable alternatives, and (iii) attempt to gain semiconductor-engineering levels of control over their carrier density, essential for the incorporation of TCOs into a new generation of multifunctional transparent electronic devices. These efforts, however, are dependent on a microscopic identification of the defects and impurities leading to the high unintentional carrier densities present in these materials. Here, we review recent developments towards such an understanding. While oxygen vacancies are commonly assumed to be the source of the conductivity, there is increasing evidence that this is not a sufficient mechanism to explain the total measured carrier concentrations. In fact, many studies suggest that oxygen vacancies are deep, rather than shallow, donors, and their abundance in as-grown material is also debated. We discuss other potential contributions to the conductivity in TCOs, including other native defects, their complexes, and in particular hydrogen impurities. Convincing theoretical and experimental evidence is presented for the donor nature of hydrogen across a range of TCO materials, and while its stability and the role of interstitial versus substitutional species are still somewhat open questions, it is one of the leading contenders for yielding unintentional conductivity in TCOs. We also review recent work indicating that the surfaces of TCOs can support very high carrier densities, opposite to the case for conventional semiconductors. In thin-film materials/devices and, in particular, nanostructures, the surface can have a large impact on the total conductivity in TCOs. We discuss models that attempt to explain both the bulk and surface conductivity on the basis of bulk band structure features common across the TCOs, and compare these materials to other semiconductors. Finally, we briefly consider transparency in these materials, and its interplay with conductivity. Understanding this interplay, as well as the microscopic contenders for providing the conductivity of these materials, will prove essential to the future design and control of TCO semiconductors, and their implementation into novel multifunctional devices.
Topics: Electric Conductivity; Oxides; Semiconductors
PubMed: 21813954
DOI: 10.1088/0953-8984/23/33/334214