-
Materials (Basel, Switzerland) Dec 2021To investigate in vitro post-fatigue fracture behavior of endodontically treated molars having been differently restored.
OBJECTIVES
To investigate in vitro post-fatigue fracture behavior of endodontically treated molars having been differently restored.
METHODS
A total of 120 extracted human molars were used. A total of 120 specimens in 14 test groups and one control group ( = 8) were root canal treated. After postendodontic sealing and build-up (AdheSE Universal, SDR), additional MOD preparations were cut. Postendodontic restorations were: Direct restorations (Tetric EvoCeram BulkFill bonded with AdheSE Universal and EverX Posterior/Essentia bonded with G-Premio Bond; as filling (F) or direct partial crown (DPC) after reducing the cusps 2 mm; indirect adhesive restorations (partial crown/PC vs. full crown/FC): e.max CAD, Celtra Duo, both luted with Variolink Esthetic; indirect zirconia restorations (partial crown/PC vs. full crown/FC), luted with RelyX Unicem 2; indirect non-bonded cast gold restorations (partial crown/PC vs. full crown/FC; Degunorm), luted with Ketac Cem. Before and after 300,000 thermocycles (5/55 °C) and 1.2 Mio. A total of 100 N load cycles, replicas were analyzed under a SEM for marginal quality in enamel and dentin (where applicable) and finally, specimens were loaded until fracture.
RESULTS
In direct groups, there was no difference between RC and FRC in fracture strength ( > 0.05); however, direct partial crowns showed higher post-fatigue fracture resistance. Regarding marginal quality, intracoronal FRC restorations exhibited more gap-free margins in enamel than RC. In the indirect groups, there was no significant difference between partial and full crowns in any of the adhesively luted ceramic groups regarding post-fatigue fracture resistance. Zirconia partial crowns exhibited significantly lower marginal quality in enamel. Indirect groups performed significantly better than direct groups in fracture resistance. Within the indirect restorations, both cast gold groups and zirconia full crowns exhibited the highest fracture resistance being superior to control teeth.
SIGNIFICANCES
Within the limits of this in vitro investigation, it can be concluded that any kind of indirect restoration with cusp replacement is suitable for ETT restoration when a certain cavity extension is exceeded. All indirect restorations, i.e., endocrowns, partial crowns, and full crowns showed a promising performance after in vitro fatigue-loading.
PubMed: 34947327
DOI: 10.3390/ma14247733 -
Journal of Dental Sciences Sep 2020Pre-eruptive intracoronal resorption (PEIR) is usually detected accidently in radiographs. However, treatment modality is still not reported systematically. The current... (Review)
Review
BACKGROUND/PURPOSE
Pre-eruptive intracoronal resorption (PEIR) is usually detected accidently in radiographs. However, treatment modality is still not reported systematically. The current study aimed to conduct a systematic review of the treatment modality of PEIR case reports and to report a case on the preservation of a vital pulp with surgical exposure in permanent maxillary canine.
MATERIALS AND METHODS
We systematically searched case reports from PubMed/MEDLINE, EMBASE, and Web of science databases. The treatment modality, suspected etiology, and follow up periods were collected from each study and reviewed by two authors independently.
RESULTS
The initial search identified 100 studies. After the title/abstract screening, 37 articles received a full-text reading; and finally, 24 articles (29 patients and 37 affected teeth) were selected for the final review. Among the 24 unerupted teeth, surgical opening and restoration treatment of PEIR was chosen as a high priority for treatment options (n = 9, 36%). Among the 13 erupted teeth, restoration was applied for the prevention such as developing in size and fracture (n = 4, 31%).
CONCLUSION
According to this systematic review, treatment modalities were based on the progressive nature of the lesion size and eruption state to establish the optimal approach for each patient. Clinicians should take into account the eruption status, lesion progression, the size of the lesion, and the degree of pulp involvement.
PubMed: 32952895
DOI: 10.1016/j.jds.2020.02.001 -
Clinical Oral Investigations Sep 2023The aim of this systematic review and meta-analysis is to assess the comparative clinical success and survival of intracoronal indirect restorations using gold, lithium... (Meta-Analysis)
Meta-Analysis Review
OBJECTIVES
The aim of this systematic review and meta-analysis is to assess the comparative clinical success and survival of intracoronal indirect restorations using gold, lithium disilicate, leucite, and indirect composite materials.
MATERIAL AND METHODS
This systematic review and meta-analysis were conducted following the Cochrane Handbook for Systematic Reviews of Interventions and PRISMA guidelines. The protocol for this study was registered in PROSPERO (registration number: CRD42021233185). A comprehensive literature search was conducted across various databases and sources, including PubMed/Medline, Embase, Cochrane Library, Web of Science, ClinicalTrials.gov, and gray literature. A total of 7826 articles were screened on title and abstract. Articles were not excluded based on the vitality of teeth, the language of the study, or the observation period. The risk difference was utilized for the analyses, and a random-effects model was applied. All analyses were conducted with a 95% confidence interval (95% CI). The calculated risk differences were derived from the combined data on restoration survival and failures obtained from each individual article. The presence of heterogeneity was assessed using the I statistic, and if present, the heterogeneity of the data in the articles was evaluated using the non-parametric chi-squared statistic (p < 0.05).
RESULTS
A total of 12 eligible studies were selected, which included 946 restorations evaluated over a minimum observation period of 1 year and a maximum observation period of 7 years. Results of the meta-analysis indicated that intracoronal indirect resin composite restorations have an 18% higher rate of failure when compared to intracoronal gold restorations over 5-7 years of clinical service (risk difference = - 0.18 [95% CI: - 0.27, - 0.09]; p = .0002; I = 0%). The meta-analysis examining the disparity in survival rates between intracoronal gold and leucite restorations could not be carried out due to methodological differences in the studies.
CONCLUSIONS
According to the currently available evidence, medium-quality data indicates that lithium disilicate and indirect composite materials demonstrate comparable survival rates in short-term follow-up. Furthermore, intracoronal gold restorations showed significantly higher survival rates, making them a preferred option over intracoronal indirect resin-composite restorations. Besides that, the analysis revealed no statistically significant difference in survival rates between leucite and indirect composite restorations. The short observation period, limited number of eligible articles, and low sample size of the included studies were significant limitations.
CLINICAL SIGNIFICANCE
Bearing in mind the limitations of the reviewed literature, this systematic review and meta-analysis help clinicians make evidence-based decisions on how to restore biomechanically compromised posterior teeth.
Topics: Dental Porcelain; Aluminum Silicates; Composite Resins; Gold
PubMed: 37597003
DOI: 10.1007/s00784-023-05050-x -
International Endodontic Journal May 2022Hydraulic materials are used in Endodontics due to their hydration characteristics namely the formation of calcium hydroxide when mixing with water and also because of... (Review)
Review
BACKGROUND
Hydraulic materials are used in Endodontics due to their hydration characteristics namely the formation of calcium hydroxide when mixing with water and also because of their hydraulic properties. These materials are presented in various consistencies and delivery methods. They are composed primarily of tricalcium and dicalcium silicate, and also include a radiopacifier, additives and an aqueous or a non-aqueous vehicle. Only materials whose primary reaction is with water can be classified as hydraulic.
OBJECTIVES
Review of the classification of hydraulic materials by Camilleri and the literature pertaining to specific uses of hydraulic cements in endodontics namely intra-coronal, intra-radicular and extra-radicular. Review of the literature on the material properties linked to specific uses providing the current status of these materials after which future trends and gaps in knowledge could be identified.
METHODS
The literature was reviewed using PUBMED, and for each clinical use, the in vitro properties such as physical, chemical, biological and antimicrobial characteristics and clinical data were extracted and evaluated.
RESULTS
A large number of publications were retrieved for each clinical use and these were grouped depending on the property type being investigated.
CONCLUSIONS
The hydraulic cements have made a difference in clinical outcomes. The main shortcoming is the poor testing methodologies employed which provide very limited information and also inhibits adequate clinical translation. Furthermore, the clinical protocols need to be updated to enable the materials to be employed effectively.
Topics: Calcium Compounds; Dental Cements; Drug Combinations; Materials Testing; Microscopy, Electron, Scanning; Oxides; Silicates; Surface Properties; X-Ray Diffraction
PubMed: 35167119
DOI: 10.1111/iej.13709 -
Journal of Pharmacy & Bioallied Sciences Feb 2024Dental casting machine is an electrical device used to extrude molten materials to fabricate dental prostheses such as crowns, bridges, intracoronal and extracoronal... (Review)
Review
Dental casting machine is an electrical device used to extrude molten materials to fabricate dental prostheses such as crowns, bridges, intracoronal and extracoronal restorations, and removable partial dentures. The casting process basically include melting and casting. Firstly, the solid material is heated in a crucible in temperature-controlled conditions to melt the material to its smelled form. The dental casting process is a complex one with multifaceted steps and equipment. Different types of casting machines are available to produce heat using different sources and techniques. It includes Arc melting, Open flame casting, and Electrical resistance. Arc melting involves the application of an electric or gas discharge on tungsten electrodes, causing the metal base to melt utilizing the heat produced by arcing. Open flame casting or induction melting employs water-cooled alternate current induction coils to induce heat. However, resistance heating uses electric current to melt precious metals.
PubMed: 38595500
DOI: 10.4103/jpbs.jpbs_923_23 -
Journal (Canadian Dental Association) Sep 1998Dental porcelain has found an increased number of applications in recent years with the development of new methods for the construction of porcelain veneers and... (Review)
Review
BACKGROUND
Dental porcelain has found an increased number of applications in recent years with the development of new methods for the construction of porcelain veneers and intracoronal restorations. In addition, it is used in metal-ceramic and all-porcelain crowns and bridges for the restoration of anterior and posterior teeth.
METHODS
This paper presents a review of a number of studies that have examined the visual and microscopic appearance and roughness of glazed, unglazed and polished porcelain surfaces using techniques such as, scanning electron microscopy and surface profilometry.
FINDINGS
All have agreed that glazed porcelain provides a smooth and dense surface. Many have shown that polishing can produce an equally smooth surface, which may even be esthetically better. Some studies supported the use of polishing as an alternative to glazing. However, reports have shown that unglazed porcelain is more abrasive than glazed.
CLINICAL SIGNIFICANCE
This paper aims to guide general practitioners in the proper polishing of adjusted porcelain in the dental office. The recommendations of various authors are summarized in Table I.
Topics: Crowns; Dental Polishing; Dental Porcelain; Dental Veneers; Denture, Partial; Esthetics, Dental; Hot Temperature; Humans; Inlays; Metal Ceramic Alloys; Microscopy, Electron, Scanning; Surface Properties; Tooth Abrasion
PubMed: 9785688
DOI: No ID Found -
Case Reports in Dentistry 2016Trauma may result in craze lines on the enamel surface, one or more fractured cusps of posterior teeth, cracked tooth syndrome, splitting of posterior teeth, and...
Trauma may result in craze lines on the enamel surface, one or more fractured cusps of posterior teeth, cracked tooth syndrome, splitting of posterior teeth, and vertical fracture of root. Out of these, management of some fractures is of great challenge and such teeth are generally recommended for extraction. Literature search reveals attempts to manage such fractures by full cast crown, orthodontic wires, and so forth, in which consideration was given to extracoronal splinting only. However, due to advancement in materials and technologies, intracoronal splinting can be achieved as well. In this case report, longitudinal fractures in tooth #27, tooth #37, and tooth #46 had occurred. In #27, fracture line was running mesiodistally involving the pulpal floor resulting in a split tooth. In teeth 37 and 46, fractures of the mesiobuccal cusp and mesiolingual cusp were observed, respectively. They were restored with cast gold inlay and full cast crown, respectively. Longitudinal fracture of 27 was treated with an innovative approach using intracanal reinforced composite with Ribbond, external reinforcement with an orthodontic band, and full cast metal crown to splint the split tooth.
PubMed: 27247808
DOI: 10.1155/2016/5083874 -
Materials (Basel, Switzerland) Aug 2019The aim of this study was to determine the effect of restoration design on the fracture resistance of different computer-aided design/computer-aided manufacturing...
The aim of this study was to determine the effect of restoration design on the fracture resistance of different computer-aided design/computer-aided manufacturing (CAD/CAM) ceramics and investigate the marginal leakage of endocrowns according to different types of cement. In total, 96 extracted mandibular first premolars were used for fabrication of endocrowns; 48 of the endocrowns were divided into 6 groups (n = 8) according to intracoronal cavity depth (2 and 3 mm) and CAD/CAM ceramics (lithium disilicate IPS e.max-CAD, zirconia-reinforced glass-ceramic Vita Suprinity, and poly-ether-ether-ketone (PEEK)). Teeth were subjected to a fracture resistance test with a universal test machine following thermo-cycling. Failure modes were determined by stereomicroscope after the load test. The rest of the endocrowns (n = 48) were produced by Vita Suprinity ceramic and divided into 6 groups (n = 8) according to the cement used (Panavia V5, Relyx Ultimate, and GC cement) with intracoronal cavity depths of 2 and 3 mm. Microleakage tests were performed using methylene blue with stereomicroscope after thermo-cycling. Numerical data for both fracture resistance and microleakage tests were obtained and evaluated by three-way ANOVA. PEEK endocrowns had higher fracture resistance compared to lithium disilicate and Vita Suprinity. Panavia V5 cement had the lowest degree of microleakage, while GC cement had the highest. Different intracoronal cavity depths had no correlation with fracture resistance and microleakage.
PubMed: 31398883
DOI: 10.3390/ma12162528 -
BMC Oral Health Jun 2022The present study aimed to make a comparison between the effects of 35% hydrogen peroxide gel (HP) and sodium perborate with distilled water (SP) bleaching agents on the...
BACKGROUND
The present study aimed to make a comparison between the effects of 35% hydrogen peroxide gel (HP) and sodium perborate with distilled water (SP) bleaching agents on the sealing characteristics of glass ionomer cement (GIC), TheraBase, ProRoot MTA and Biodentine intraorifice barriers.
METHODS
One hundred and twelve single-rooted mandibular human premolar teeth extracted from young patients (14-25 years) were chosen. Root cement and cementoenamel junction (CEJ) of teeth were examined under a stereomicroscope at 10 × magnification to ensure there was no cement defect or dentin gap in CEJ. After the endodontic access cavities were opened on the occlusal surfaces of the teeth, the working length was determined. Instrumentation of each root canal was performed with a ProTaper Gold rotary system in the determined working length and filled with gutta-percha + AH Plus with a single cone technique using. Root fillings were removed 3 mm short of the CEJ and sealed with one of the following intraorifice barrier materials (n = 30/group): 1. GIC; 2. TheraBase; 3. ProProot-MTA; 4. Biodentine. In each of the sub-groups, either HP or SP was used to perform intracoronal bleaching on days 1, 4, and 7. All outer surfaces of the specimens except the 3 mm cervical region were covered with nail polish and modeling wax layers. Specimens were immersed in a 5 ml Eppendorf tube that contained 2 mL of distilled water. The penetration of peroxide release was measured using the colorimetric ferric thiocyanate method. Statistical analysis of the data was performed with Three-way ANOVA and Tukey's test (P = 0.05).
RESULTS
In the HP groups, GIC showed the greatest peroxide release when compared with other tested groups on day 1 (P < 0.05). Biodentine and ProRoot MTA displayed a significantly lower peroxide leakage when compared to GIC and TheraBase on days 1 and 4 (P < 0.05). While GIC and TheraBase were used, HP observed higher peroxide penetration when compared with SP on days 1 and 4 (P < 0.05).
CONCLUSIONS
Peroxide diffusion was significantly influenced by the kind of intracoronal bleaching agents and intraorifice barrier materials used.
Topics: Bleaching Agents; Glass Ionomer Cements; Gutta-Percha; Humans; Hydrogen Peroxide; Peroxides; Root Canal Filling Materials; Tooth Bleaching; Water
PubMed: 35773675
DOI: 10.1186/s12903-022-02300-4