-
Frontiers in Bioengineering and... 2022Sufficient alveolar bone is a safeguard for achieving desired outcomes in orthodontic treatment. Moving a tooth into an alveolar bony defect may result in a periodontal... (Review)
Review
Sufficient alveolar bone is a safeguard for achieving desired outcomes in orthodontic treatment. Moving a tooth into an alveolar bony defect may result in a periodontal defect or worse-tooth loss. Therefore, when facing a pathologic situation such as periodontal bone loss, alveolar clefts, long-term tooth loss, trauma, and thin phenotype, bone grafting is often necessary to augment bone for orthodontic treatment purposes. Currently, diverse bone grafts are used in clinical practice, but no single grafting material shows absolutely superior results over the others. All available materials demonstrate pros and cons, most notably donor morbidity and adverse effects on orthodontic treatment. Here, we review newly developed graft materials that are still in the pre-clinical stage, as well as new combinations of existing materials, by highlighting their effects on alveolar bone regeneration and orthodontic tooth movement. In addition, novel manufacturing techniques, such as bioprinting, will be discussed. This mini-review article will provide state-of-the-art information to assist clinicians in selecting grafting material(s) that enhance alveolar bone augmentation while avoiding unfavorable side effects during orthodontic treatment.
PubMed: 35845390
DOI: 10.3389/fbioe.2022.869191 -
Kidney International Reports Jun 2020Since the arteriovenous fistula (AVF) was first conceived over 50 years ago, the goal to create a vascular conduit with predictable and reproducible maturation and... (Review)
Review
Since the arteriovenous fistula (AVF) was first conceived over 50 years ago, the goal to create a vascular conduit with predictable and reproducible maturation and durability continues to elude caregivers. Recently, however, advances in the understanding of vascular biology and new technologies now provides us with some optimism; we are moving toward a viable solution. A quickly maturing, sustainable, and durable arteriovenous access may soon be attainable. This review will discuss these advances. There are novel approaches to AVF creation and devices to enhance maturation, advances in arteriovenous graft material(s), and devices to safely prolong the use of tunneled dialysis catheters. Although hemodialysis (HD) access remains a complex problem, these innovations may lead the way to optimizing the care and the quality of life of those patients who have no choice but to proceed with HD.
PubMed: 32518859
DOI: 10.1016/j.ekir.2020.02.1024 -
Proceedings of the National Academy of... Jul 2017Halide perovskite (HaP) semiconductors are revolutionizing photovoltaic (PV) solar energy conversion by showing remarkable performance of solar cells made with HaPs,...
Halide perovskite (HaP) semiconductors are revolutionizing photovoltaic (PV) solar energy conversion by showing remarkable performance of solar cells made with HaPs, especially tetragonal methylammonium lead triiodide (MAPbI). In particular, the low voltage loss of these cells implies a remarkably low recombination rate of photogenerated carriers. It was suggested that low recombination can be due to the spatial separation of electrons and holes, a possibility if MAPbI is a semiconducting ferroelectric, which, however, requires clear experimental evidence. As a first step, we show that, in operando, MAPbI (unlike MAPbBr) is pyroelectric, which implies it can be ferroelectric. The next step, proving it is (not) ferroelectric, is challenging, because of the material's relatively high electrical conductance (a consequence of an optical band gap suitable for PV conversion) and low stability under high applied bias voltage. This excludes normal measurements of a ferroelectric hysteresis loop, to prove ferroelectricity's hallmark switchable polarization. By adopting an approach suitable for electrically leaky materials as MAPbI, we show here ferroelectric hysteresis from well-characterized single crystals at low temperature (still within the tetragonal phase, which is stable at room temperature). By chemical etching, we also can image the structural fingerprint for ferroelectricity, polar domains, periodically stacked along the polar axis of the crystal, which, as predicted by theory, scale with the overall crystal size. We also succeeded in detecting clear second harmonic generation, direct evidence for the material's noncentrosymmetry. We note that the material's ferroelectric nature, can, but need not be important in a PV cell at room temperature.
PubMed: 28588141
DOI: 10.1073/pnas.1702429114 -
Journal of Clinical and Experimental... Nov 2019Endocrown restorations as a conservative approach to restore endodontically treated teeth still need investigation under fatigue and made in different materials. This...
BACKGROUND
Endocrown restorations as a conservative approach to restore endodontically treated teeth still need investigation under fatigue and made in different materials. This study evaluated the effect of restorative material and restoration thickness on the maximum fracture load of endocrowns subjected to cyclic loading.
MATERIAL AND METHODS
Sixty (60) third molar teeth received an endocrown preparation with three different heights of remaining dental tissue (1.5, 3.0 or 4.5 mm). A leucite-based ceramic (LEU) and a lithium disilicate (LD) based ceramic were selected to manufacture the CAD/CAM endocrown restorations, totaling 6 groups (n=10). The specimens were subjected to fatigue loading (200N, 2 x 106 cycles, water) and then to the single load to failure test (1 mm/min crosshead speed). Data were analyzed by using two-way ANOVA and Tukey tests (< 0.05).
RESULTS
All endocrowns survived the fatigue test. The thickness did not influence the restoration's fracture load (=0.548) instead the restorative material (=0.003). LD showed higher mean values (1714.43 N)A than LEU (1313.47 N)B.
CONCLUSIONS
Endocrowns manufactured with CAD/CAM lithium disilicate blocks showed superior fracture load than the leucite-based blocks after mechanical fatigue. Nevertheless, both materials presented acceptable survival and fracture load as long as the material's minimum thickness and the enamel adhesion are respected. Endocrown, CAD/CAM, Endodontically treated teeth, Failure load, Minimal intervention dentistry.
PubMed: 31700569
DOI: 10.4317/jced.56002 -
Skin Research and Technology : Official... Nov 2023We aimed to develop an electroactive antibacterial material for the treatment of skin wound diseases.
OBJECTIVE
We aimed to develop an electroactive antibacterial material for the treatment of skin wound diseases.
METHOD
To this aim, we modified chitosan (CS), a biocompatible polymer, by coupling it with graphene (rGO) and an antimicrobial polypeptide DOPA-PonG1. The material's effect on skin injury healing was studied in combination with external electrical stimulation (EEM). The structure, surface composition, and hydrophilicity of the modified CS materials were evaluated using scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), and contact angle measurements. We studied NIH3T3 cells cultured with modified materials and subjected to EEM to assess viability, adhesion, and tissue repair-related gene expression.
RESULTS
SEM data demonstrated that rGO was distributed uniformly on the surface of the CS material, increasing surface roughness, and antimicrobial peptides had minimal impact on surface morphology. FTIR confirmed the uniform distribution of rGO and antibacterial peptides on the material surface. Both rGO and DOPA-PonG1 enhanced the hydrophilicity of CS materials, with rGO also improving tensile strength. The dual modification of CS with rGO and DOPA-PonG1 synergistically increased antibacterial efficacy. Cellular events and gene expression relevant to tissue repair process were enhanced by these modifications. Furthermore, EEM accelerated epidermal regeneration more than the material alone. In a rat skin wound model, DOPA-PonG1@CS/rGO dressing combined with electrical stimulation exhibited accelerated healing of skin defect.
CONCLUSION
Overall, our results demonstrate that CS materials modified with rGO and DOPA-PonG1 have increased hydrophilicity, antibacterial characteristics, and tissue regeneration capacities. This modified material in conjunction with EEM hold promise for the clinical management for dermal wounds.
Topics: Mice; Rats; Animals; NIH 3T3 Cells; Anti-Bacterial Agents; Chitosan; Electric Stimulation; Bandages; Dihydroxyphenylalanine
PubMed: 38009021
DOI: 10.1111/srt.13465 -
Materials (Basel, Switzerland) Jul 2023This paper introduces a new type of gypsum-based humidity-control material. The material combines gypsum-silica gel humidity-control material with 20% sepiolite powder...
This paper introduces a new type of gypsum-based humidity-control material. The material combines gypsum-silica gel humidity-control material with 20% sepiolite powder activated by calcium chloride. Both experimental and simulation studies were conducted to assess its humidity-control performance. The experimental results indicate that gypsum-based humidity-control material has the property of absorbing moisture in high-humidity environments and releasing moisture in low-humidity environments. Moreover, both environmental temperature and relative humidity (RH) have an impact on the material's humidity-control performance. At a relative humidity of 97.4%, the maximum equilibrium moisture content of the material is 0.225 g/g, which is 1.4 times that of the gypsum-silica gel humidity-control material and 4.5 times that of pure gypsum material. The simulation results indicate that gypsum-based humidity-control material effectively mitigates indoor relative humidity fluctuations and maintains indoor air relative humidity within a narrow range. Furthermore, the material has the potential to reduce building energy consumption. This is especially evident under climate conditions with large temperature and relative humidity differences between day and night, such as in Beijing, Paris, and Atlanta. The maximum potential energy-saving rate in Beijing can reach up to 19.31%.
PubMed: 37569915
DOI: 10.3390/ma16155211 -
Materials (Basel, Switzerland) Aug 2022Three-dimensional (3D) woven composites have attracted much attention in the lightweight research of protective armor due to their high specific strength and good impact...
Three-dimensional (3D) woven composites have attracted much attention in the lightweight research of protective armor due to their high specific strength and good impact resistance. However, there are still many gaps in terms of the performance and influencing factors of three-dimensional deep-angle-interlock (3DDAI) Kevlar/EP armor materials. Therefore, in order to prepare 3DDAI Kevlar/EP armor materials with excellent ballistic resistance and mechanical properties, this paper studies the bending performance of 3DDAI Kevlar/EP armor materials and the influence of the number of stacking layers, resin content, laying method, and weft density. Finally, we compare it with the traditional two-dimensional (2D) plain laminated Kevlar/EP armor material. The results showed that when the 3DDAI Kevlar/EP armor material was subjected to bending load, the upper and bottom layers of the material had a great influence on the initial stiffness and fracture strength of the material, respectively; when the material's warp and weft density are quite different, the utilization rate of the yarn and the strength of the material are negatively affected; the fracture energy of the 3DDAI Kevlar/EP armor material prepared by the orthogonal laying method was about 20% higher than that of the 3DDAI Kevlar/EP armor material with the unidirectional layering method; and the bending performance of the 3DDAI Kevlar/EP armor material in the weft direction was better than that of the 2D plain laminated Kevlar/EP armor material, with the 3DDAI Kevlar/EP armor material having better delamination resistance. The research results will lay the foundation for structural optimization and engineering applications of such materials.
PubMed: 35955259
DOI: 10.3390/ma15155321 -
Nature Materials Dec 2021The antagonism between strength and resistance to hydrogen embrittlement in metallic materials is an intrinsic obstacle to the design of lightweight yet reliable...
The antagonism between strength and resistance to hydrogen embrittlement in metallic materials is an intrinsic obstacle to the design of lightweight yet reliable structural components operated in hydrogen-containing environments. Economical and scalable microstructural solutions to this challenge must be found. Here, we introduce a counterintuitive strategy to exploit the typically undesired chemical heterogeneity within the material's microstructure that enables local enhancement of crack resistance and local hydrogen trapping. We use this approach in a manganese-containing high-strength steel and produce a high dispersion of manganese-rich zones within the microstructure. These solute-rich buffer regions allow for local micro-tuning of the phase stability, arresting hydrogen-induced microcracks and thus interrupting the percolation of hydrogen-assisted damage. This results in a superior hydrogen embrittlement resistance (better by a factor of two) without sacrificing the material's strength and ductility. The strategy of exploiting chemical heterogeneities, rather than avoiding them, broadens the horizon for microstructure engineering via advanced thermomechanical processing.
Topics: Hydrogen; Steel; Tensile Strength
PubMed: 34239084
DOI: 10.1038/s41563-021-01050-y -
Sensors (Basel, Switzerland) Oct 2022Sensing Technology (ST) plays a key role in Structural Health-Monitoring (SHM) systems. ST focuses on developing sensors, sensory systems, or smart materials that... (Review)
Review
Sensing Technology (ST) plays a key role in Structural Health-Monitoring (SHM) systems. ST focuses on developing sensors, sensory systems, or smart materials that monitor a wide variety of materials' properties aiming to create smart structures and smart materials, using Embedded Sensors (ESs), and enabling continuous and permanent measurements of their structural integrity. The integration of ESs is limited to the processing technology used to embed the sensor due to its high-temperature sensitivity and the possibility of damage during its insertion into the structure. In addition, the technological process selection is dependent on the base material's composition, which comprises either metallic or composite parts. The selection of smart sensors or the technology underlying them is fundamental to the monitoring mode. This paper presents a critical review of the fundaments and applications of sensing technologies for SHM systems employing ESs, focusing on their actual developments and innovation, as well as analysing the challenges that these technologies present, in order to build a path that allows for a connected world through distributed measurement systems.
Topics: Computer Communication Networks; Monitoring, Physiologic; Smart Materials
PubMed: 36366018
DOI: 10.3390/s22218320 -
Journal of Cheminformatics Nov 2022Establishing a data-driven pipeline for the discovery of novel materials requires the engineering of material features that can be feasibly calculated and can be applied...
Establishing a data-driven pipeline for the discovery of novel materials requires the engineering of material features that can be feasibly calculated and can be applied to predict a material's target properties. Here we propose a new class of descriptors for describing crystal structures, which we term Robust One-Shot Ab initio (ROSA) descriptors. ROSA is computationally cheap and is shown to accurately predict a range of material properties. These simple and intuitive class of descriptors are generated from the energetics of a material at a low level of theory using an incomplete ab initio calculation. We demonstrate how the incorporation of ROSA descriptors in ML-based property prediction leads to accurate predictions over a wide range of crystals, amorphized crystals, metal-organic frameworks and molecules. We believe that the low computational cost and ease of use of these descriptors will significantly improve ML-based predictions.
PubMed: 36348412
DOI: 10.1186/s13321-022-00658-9