-
Clinical Oral Investigations Oct 2022This study aimed to investigate the malocclusion complexity and orthodontic treatment need among children with and without autism spectrum disorder (ASD) referred for...
OBJECTIVES
This study aimed to investigate the malocclusion complexity and orthodontic treatment need among children with and without autism spectrum disorder (ASD) referred for orthodontic treatment by quantifying the Discrepancy Index (DI) and Index of Orthodontic Treatment Need (IOTN).
MATERIALS AND METHODS
Dental records of 48 ASD and 49 non-ASD consecutive patients aged between 9 and 18 years (median age 13.0 years) referred for orthodontic treatment were reviewed and compared. The Discrepancy Index (DI) was quantified to determine the malocclusion complexity, and the Index of Orthodontic Treatment Need (IOTN), including the Dental Health Component (IOTN-DHC) and Aesthetic Component (IOTN-AC), was quantified to determine the orthodontic treatment need. Statistical analysis included descriptive analysis, Pearson chi-square tests, Fisher's exact test, Mann-Whitney U tests, and several univariate and multivariate regression analyses. The statistical analysis used descriptive analysis, Pearson chi-square test, Fisher's exact test, and multivariate logistic regression.
RESULTS
The results show that both malocclusion complexity (DI, p = 0.0010) and orthodontic treatment need (IOTN-DHC, p = 0.0025; IOTN-AC p = 0.0009) were significantly higher in children with ASD. Furthermore, children with ASD had a higher prevalence of increased overjet (p = .0016) and overbite (p = .031).
CONCLUSIONS
Malocclusion complexity and orthodontic treatment need are statistically significantly higher among children with ASD than children without ASD, independent of age and sex.
CLINICAL RELEVANCE
Children with autism may benefit from visits to a dental specialist (orthodontist) to prevent, to some extent, developing malocclusions from an early age.
Topics: Adolescent; Autism Spectrum Disorder; Child; Esthetics, Dental; Health Services Needs and Demand; Humans; Index of Orthodontic Treatment Need; Malocclusion; Malocclusion, Angle Class II; Orthodontics, Corrective; Overbite
PubMed: 35701552
DOI: 10.1007/s00784-022-04578-8 -
Dental Press Journal of Orthodontics 2023An increase in life expectancy was observed in the past years. Consequently, the knowledge of the maturational changes in the occlusion is highly important to guide...
INTRODUCTION
An increase in life expectancy was observed in the past years. Consequently, the knowledge of the maturational changes in the occlusion is highly important to guide clinicians during treatment planning.
OBJECTIVE
In this article, the occlusal and facial aging changes occurred during almost 50 years of follow-up are described. A normal occlusion sample from Bauru Dental School, University of São Paulo, Brazil, was evaluated at 13 (T1), 17 (T2) and 60 (T3) years of age. The maturational changes observed in digital dental models and cephalometric radiographs were presented. A revision of the aging process, under the gerontology and psychology perspectives, was also explored.
DISCUSSION
Maturational changes in non-treated individuals were very delicate. Mandibular crowding, decrease in the overbite, changes in the maxillary second molar position, increase in the clinical crown length, dental wear and discoloration were observed.
CONCLUSION
Compared to the remarkable facial and skin changes during aging, the occlusion seems to be the most stable feature of the face during the aging process.
FINAL CONSIDERATIONS
An adequate oral care throughout lifetime makes the smile the best memory of youth at mature ages.
Topics: Adolescent; Humans; Malocclusion; Overbite; Malocclusion, Angle Class II; Dental Occlusion; Molar; Mandible; Cephalometry; Maxilla
PubMed: 36790248
DOI: 10.1590/2177-6709.27.6.e22spe6 -
Korean Journal of Orthodontics Nov 2022Moebius syndrome (MBS) is a congenital neurologic disorder that causes cranio-facial abnormalities. It involves paralysis of the VI and VII cranial nerves and causes...
Moebius syndrome (MBS) is a congenital neurologic disorder that causes cranio-facial abnormalities. It involves paralysis of the VI and VII cranial nerves and causes bilateral or unilateral facial paralysis, eye movement disorder, and deformation of the upper and lower limbs. The orofacial dysfunctions include microstomia, micrognathia, hypotonic mimetic and lip muscles, dental enamel hypoplasia, tongue deformity, open bite or deep overbite, maxillary hypoplasia, high arched palate, mandibular hyperplasia or features indicating mandibular hypoplasia. This case report presents a 7-year-old male patient who was diagnosed with MBS at the age 2 years. The patient displayed typical clinical symptoms and was diagnosed with Class II malocclusion with a large overjet/overbite, tongue deformity and motion limitation, and lip closure incompetency. Treatment was initiated using a removable appliance for left scissor bite correction. After permanent tooth eruption, fixed appliance treatment was performed for correction of the arch width discrepancy and deep overbite. A self-ligation system and wide-width arch form wire were used during the treatment to expand the arch width. After 30 months of phase II treatment, the alignment of the dental arch and stable molar occlusion was achieved. Function and occlusion remained stable with a Class I canine and molar relationship, and a normal overjet/overbite was maintained after 9.4 years of retainer use. In MBS patients, it is important to achieve an accurate early diagnosis, and implement a multidisciplinary treatment approach and long-term retention and follow-up.
PubMed: 36070886
DOI: 10.4041/kjod22.012 -
The Angle Orthodontist May 2022To examine relapse with thermoplastic retainers equipped with microsensors 1 year after treatment.
OBJECTIVES
To examine relapse with thermoplastic retainers equipped with microsensors 1 year after treatment.
MATERIALS AND METHODS
A total of 42 patients (29 females, 13 males) treated with four premolar extractions were included in this study. Thermoplastic appliances equipped with TheraMon microsensors (Handelsagentur Gschladt, Hargelsberg, Austria) were used to assess daily wear time (DWT), and the patients were monitored at 2-month intervals for a period of 12 months. At the end of the follow-up, the following two groups were formed based on the mean DWT: short wear time (SWT; <9 h/d) and long wear time (LWT; ≥9 h/d). Digital models were constructed before treatment (T0), at debonding (T1), and 6 months (T2) and 12 months (T3) after debonding. Little's Irregularity Index (LII) and the intercanine and intermolar widths, arch lengths, overjet, and overbite were calculated based on the digital models. Data were analyzed statistically.
RESULTS
Irregularity and overjet increased, whereas transverse measurements and arch lengths decreased with time in both groups. During the retention period, overbite decreased in the SWT group but increased in the LWT group. There were significant differences between groups only in mandibular irregularity. The LII values of the SWT group were significantly higher than those of the LWT group for the T1-T2 and T1-T3 time intervals (P < .05).
CONCLUSIONS
A mean DWT less than 9 hours/day was inadequate for controlling irregularity within clinically acceptable limits. A wear time of at least 9 h/d is recommended for the maintenance of mandibular anterior alignment.
Topics: Female; Humans; Male; Malocclusion, Angle Class II; Mandible; Orthodontic Retainers; Overbite; Recurrence
PubMed: 35076691
DOI: 10.2319/072221-578.1 -
Medicine Nov 2022Overbite control is a key factor in orthodontic treatment. In some cases, incisor intrusion is essential and could be an optimal strategy for overbite control. The aim...
RATIONALE
Overbite control is a key factor in orthodontic treatment. In some cases, incisor intrusion is essential and could be an optimal strategy for overbite control. The aim of this article was to introduce a biomechanical system called the posterior miniscrew-assisted lever arm, which is innovative in using existing posterior miniscrews to intrude the upper incisors and to control anterior overbite while simultaneously retracting the anterior teeth. Its efficiency in incisor intrusion has been proved with 2 cases.
PATIENT CONCERNS
Two adult women who came for orthodontic treatment with the chief complaint of convex profile were included in this study.
DIAGNOSIS
Both patients had similar malocclusions of Class II molar relationship, anterior deep overjet, and anterior deep overbite.
INTERVENTIONS
Their treatment plans were to extract 4 first premolars and insert 2 maxillary posterior buccal miniscrews. After teeth aligning and leveling, en masse retraction was started in both arches. During the space-closing stage, posterior miniscrew-assisted lever arms were placed in their upper arches so as to intrude upper incisors and control the overbite.
OUTCOMES
After respectively 4 months and 3 months of incisor intrusion, the anterior overbite was successfully reduced to the normal range in each patient. Cephalometric analysis and superimposition also confirmed the treatment effect of this biomechanical system on incisor intrusion.
LESSONS
The posterior miniscrew-assisted lever arm is a valuable biomechanical system for intruding incisors and controlling anterior overbite.
Topics: Adult; Humans; Female; Overbite; Incisor; Arm; Malocclusion, Angle Class II; Research
PubMed: 36451401
DOI: 10.1097/MD.0000000000031616 -
ISRN Radiology 2013Aim. To determine whether a relationship exists between the linear measurements of overjet and overbite and the interincisal space delimited by the morphology of the...
Aim. To determine whether a relationship exists between the linear measurements of overjet and overbite and the interincisal space delimited by the morphology of the upper and lower incisors. Method and Materials. 30 subjects (age range from 14.1 to 34.8 years, with a median age of 23.5 years and sex ratio F/M: 5/10) with overjet and overbite equal to 2 mm were selected from a group of 381 individuals with a full and well-aligned dentition, no previous dental treatment, and no signs or symptoms indicative of temporomandibular disorder. Computed Tomography images of vinyl polysiloxane impressions of the 30 subjects' anterior teeth were acquired. The interincisal space was defined as Immediate Overjet Angle and was calculated on the Computed Tomography images. Results. Although the 30 subjects presented overlapping measures of overjet and overbite, the values of the Immediate Overjet Angles were different in a range of a minimum value of 12° and a maximum value of 54°. Conclusion. This study reveals that (1) only 30 (7.9%) of the 381 individuals considered have values of overjet and overbite equal to 2 mm and (2) the Immediate Overjet Angle values of the 30 subjects are not related to the values of overjet and overbite.
PubMed: 24967291
DOI: 10.5402/2013/932805 -
Turkish Journal of Orthodontics Jun 2022The aim of this analysis was to evaluate the maxillary incisor intrusion and change in overbite achieved by micro-implants compared to Connecticut intrusion arches among...
The aim of this analysis was to evaluate the maxillary incisor intrusion and change in overbite achieved by micro-implants compared to Connecticut intrusion arches among post-pubertal patients with deep bite. Medline, PubMed, Cochrane, and Google scholar were searched for studies falling under the inclusion criteria. Randomized controlled trials (RCTs) and controlled clinical trials (CCTs) com- paring maxillary incisor intrusion among post-pubertal deep bite cases treated by mini-implants and Connecticut intrusion arches were to be included. Outcome data were extracted using guidelines published by the Cochrane Collaboration. A systematic review was conducted using Cochrane Program Review Manager, version 5. A random effects model was used to assess the mean difference in the amount of incisor intrusion and overbite correction achieved between the 2 methods. Statistical significance was set at P < .05. Assessment of certainty of evidence was conducted using GRADE analysis. Six trials met the inclusion criteria. Mean differences for incisor intrusion -0.67 [95% CI, 0.97, 0.38] I2 = 31%; P < .00001) and overbite correction -0.51 [95% CI, 0.85, 0.16] I2 = 50%; P = .004) achieved with mini-implants were found to be significantly effective when compared to the Connecticut intrusion arch. Low to mod- erate heterogeneity was noted for incisor intrusion and change in overbite analysis respectively. High certainty of evidence was noted for higher association of mini-implants with incisor intrusion and overbite correction. Our meta-analysis suggests that mini-implants are superior to the Connecticut intrusion arch with respect to the amount of incisor intrusion and overbite correction. Further studies are still needed to confirm the superiority.
PubMed: 35788440
DOI: 10.5152/TurkJOrthod.2022.21080 -
The Angle Orthodontist 1990The purpose of this study was to explore the possible significant sex difference in occlusion, provide information about the occlusal variation among Egyptians, and... (Review)
Review
The purpose of this study was to explore the possible significant sex difference in occlusion, provide information about the occlusal variation among Egyptians, and present an epidemiologic panorama of dental occlusion among different ethnic world populations. The hypothesis was that the occlusal variation is not independent of sex. A sample of 501 female and male adult subjects was studied. Normal occlusion, Angle's classification of malocclusion, and the Dewey-Anderson modifications for typifications were recorded. Chi-square tests were used. The results obtained from this study indicate that a significant sex difference in occlusion exists for normal occlusion, Angle Class I, and Angle Class III. Further, considering an anterior crossbite as the sole indicator of an Angle Class III malocclusion is erroneous; an anterior crossbite may exist in other classes, and Angle Class III type 1 (edge-to-edge) is more prevalent than either Class III type 2 (normal anterior overbite) or type 3 (anterior crossbite). Although numerically different, occlusal variation follows a universal general distributional pattern for most world populations. Some speculations are presented for clinical implications and for research suggestions.
Topics: Adolescent; Adult; Dental Occlusion; Dental Occlusion, Centric; Egypt; Female; Humans; Male; Malocclusion; Sex Characteristics
PubMed: 2202237
DOI: 10.1043/0003-3219(1990)060<0207:EPODO>2.0.CO;2 -
Progress in Orthodontics Apr 2022To produce a guide for dentists and orthodontists to determine orthodontic treatment need in borderline cases (dental health component DHC 3) and to compare views of... (Observational Study)
Observational Study
OBJECTIVE
To produce a guide for dentists and orthodontists to determine orthodontic treatment need in borderline cases (dental health component DHC 3) and to compare views of different panels of judges on treatment need.
MATERIALS AND METHODS
Prospective, observational study. Photographs of one hundred subjects displaying borderline occlusal traits (DHC3) were collected. Three panels of judges consisting of 25 orthodontists, 25 dentists and 25 lay persons assessed photographs based on orthodontic treatment need on aesthetic grounds.
RESULTS
Spearman's correlation coefficient showed no statistical difference between the panels of judges (p < 0.001). The judges identified a 'high need' for treatment on aesthetic grounds for those with anterior open bites and reverse overjets. Kappa analysis showed moderate intra-rater agreement for the orthodontic and dental panels of judges (k = 0.47 and 0.45, respectively) and fair agreement (k = 0.26) for the lay panel, highlighting the intrinsic difficulty of assessing borderline malocclusions.
CONCLUSION
There was no statistical difference in the way the orthodontic, dental and lay panels of judges perceived treatment need for DHC 3 cases. Anterior open bites and reverse overjets were predominantly found to be in high need of treatment by all panels of judges. A 'Guide to Borderline Orthodontic Need' (GBON) is proposed consisting of 8 photographs of subjects with borderline occlusal traits (DHC3) determined unambiguously by lay, dental and orthodontic panels as either 'needing' or 'not needing' orthodontic treatment on aesthetic grounds. It is anticipated that this will assist users to make judgments on aesthetic grounds on the need for treatment in borderline cases.
Topics: Esthetics, Dental; Humans; Malocclusion; Open Bite; Orthodontics, Corrective; Overbite; Prospective Studies
PubMed: 35434773
DOI: 10.1186/s40510-022-00407-6 -
The Saudi Dental Journal May 2021To investigate the association of overjet and overbite with clinical parameters of periodontal disease.
AIM
To investigate the association of overjet and overbite with clinical parameters of periodontal disease.
MATERIAL AND METHODS
The study was performed in Riyadh, Saudi Arabia, from March 2017 to March 2018. 600 Saudi males aged 20-30 years old were included. Participants were divided into three groups (n: 200) depending on the presence of overjet (OJ) or overbite (OB) and its relationship with periodontal disease. Periodontal parameters were assessed clinically and radiographically. One-way analysis of variance was used to test for any significant differences between groups. Tukey's post hoc comparison test was used to evaluate correlations among parameters.
RESULTS
OJ exceeding 8 mm was correlated with debris, calculus, and periodontal scores on mandibular anterior teeth, especially on the lingual surfaces.Both OJ and OB groups showed significantly increased PD, compared to that of the control group in measurement at the lingual ( = 0.004, 0.003) and proximal ( = 0.002, 0.002) surfaces of the lower anterior teeth. Finally, the CEJ-AB was statistically significantly higher in the OB group compared to the OJ and control groups ( = 0.091, 0.008).
CONCLUSION
The present study found a correlation between OJ and OB and periodontal disease, as measured using specific parameters. This indicates that periodontal treatment may be insufficient unless the overjet or overbite is corrected.
PubMed: 34025082
DOI: 10.1016/j.sdentj.2020.02.002