-
Indian Journal of Dental Research :... 2020Abfraction is a loss of tooth structure along the gingival margin and manifests with different clinical appearances. It has multifactorial etiology and may occur due to... (Review)
Review
BACKGROUND
Abfraction is a loss of tooth structure along the gingival margin and manifests with different clinical appearances. It has multifactorial etiology and may occur due to normal and abnormal tooth function and may also be accompanied by pathological wear, such as abrasion and erosion. The theory behind the abfraction is that the tooth flexure in the cervical area is caused due to occlusal compressive forces and tensile stresses. This results in the fractures in the hydroxyapatite (HA) crystals. It is also caused by the low packing density of the Hunter-Schreger band (HSB) at the cervical area. Unfortunately, there is a lack of evidence regarding the outcome of abfraction with or without intervention. The aim of this review is to collect clinical information from the literature and discuss the etiology, pathogenesis, clinical representation, and management. Also, search databases for clinical studies that describe the role of sclerotic dentine in non-carious cervical lesions (NCCLs) are becoming a clinical challenge.
METHODS
The literature was searched that described the etiology, pathogenesis, clinical representation, and management of the abfraction lesions. Also, a specific question regarding the formation of sclerotic dentin in the NCCL lesion was described and searched for evidence that challenges etching, bonding, and successfully restoring NCCLs. The databases PUBMED, SCOPUS, MEDLINE, WEB of SCIENCE, and EMBASE were searched using the key terms. The inclusion criteria were the randomized controlled clinical trial, cohort studies, and cross-sectional studies that aimed at determining the role of sclerotic dentine in NCCLs and its effect on etching, bonding.
RESULTS
One clinical study was retrieved according to the PRISMA flowchart and PICO format. The longer etching time, total-etch adhesive system, and EDTA pre-treatment of the sclerotic dentin of cervical wedge-shaped defects could improve the bonding strength in lesions like NCCL's.
CONCLUSION
In conclusion, clinical challenges that occur due to NCCLs are better managed by a proper understanding of factors like etiopathogenesis, ultra-structure of enamel, and dentine and their effect on the bonding of restorations of the tooth.
Topics: Cross-Sectional Studies; Dental Enamel; Dentin; Humans; Tooth Cervix; Tooth Diseases
PubMed: 32436913
DOI: 10.4103/ijdr.IJDR_863_18 -
The Saudi Dental Journal Feb 2020Tooth surface loss (TSL) or tooth wear (TW) is an irreversible loss of hard tooth structure caused by factors other than those responsible for dental caries. TSL is... (Review)
Review
OBJECTIVES
Tooth surface loss (TSL) or tooth wear (TW) is an irreversible loss of hard tooth structure caused by factors other than those responsible for dental caries. TSL is observed clinically as attrition, abrasion, abfraction, and erosion. It may be associated with symptoms such as tooth hypersensitivity and function impairment, and may lead to change in the morphology of the affected tooth. However, it may also be asymptomatic, meaning the patient may not be aware of it. In this instance, the dentist is encouraged to make the patient aware of this issue.The aim of this review is to provide an overview of the classification and management of TSL.
MATERIAL AND METHODS
The PubMed (MEDLINE) search engine was used to gather the most recent information on TSL. The search was restricted to a five year period (1 September 2014-31 August 2019), and only English-language studies were included. A Boolean search of the PubMed dataset was implemented to combine a range of keywords: (Tooth surface loss OR tooth wear) AND (tooth attrition OR tooth Abrasion OR tooth erosion OR tooth abfraction OR non-carious cervical lesions) AND (humans). Studies were also obtained by manual searches and from Google Scholar.
RESULTS
By this process, 560 articles and studies were obtained. More studies were also obtained by manual searches and from Google Scholar. The most relevant published studies were chosen and used in the current review. The selected articles are included in the reference list.
CONCLUSION
TSL is a clinical problem that dentists face on a daily basis. Therefore, a sound clinical approach by which TSL can be prevented and managed is essential. While this approach requires that dentists are knowledgeable about the issue, increasing public awareness of TSL is also vital.
PubMed: 32071532
DOI: 10.1016/j.sdentj.2019.09.004 -
Clinical, Cosmetic and Investigational... 2016Abfraction is a type of noncarious cervical lesion (NCCL) characterized by loss of tooth tissues with different clinical appearances. Evidence supports that abfraction... (Review)
Review
Abfraction is a type of noncarious cervical lesion (NCCL) characterized by loss of tooth tissues with different clinical appearances. Evidence supports that abfraction lesions, as any NCCLs, have a multifactorial etiology. Particularly, the cervical wear of abfraction can occur as a result of normal and abnormal tooth function and may also be accompanied by pathological wear, such as abrasion and erosion. The interaction between chemical, biological, and behavioral factors is critical and helps to explain why some individuals exhibit more than one type of cervical wear mechanism than others. In an era of personalized dentistry, patient risk factors for NCCLs must be identified and addressed before any treatment is performed. Marked variations exist in dental practice concerning the diagnosis and management of these lesions. The lack of understanding about the prognosis of these lesions with or without intervention may be a major contributor to variations in dentists' management decisions. This review focuses on the current knowledge and available treatment strategies for abfraction lesions. By recognizing that progressive changes in the cervical area of the tooth are part of a physiologically dynamic process that occurs with aging, premature and unnecessary intervention can be avoided. In cases of asymptomatic teeth, where tooth vitality and function are not compromised, abfraction lesions should be monitored for at least 6 months before any invasive procedure is planned. In cases of abfraction associated with gingival recession, a combined restorative-surgical approach may be performed. Restorative intervention and occlusal adjustment are not indicated as treatment options to prevent further tooth loss or progression of abfraction. The clinical decision to restore abfraction lesions may be based on the need to replace form and function or to relieve hypersensitivity of severely compromised teeth or for esthetic reasons.
PubMed: 27217799
DOI: 10.2147/CCIDE.S63465 -
Journal of Clinical Medicine Feb 2022Bruxism and gastroesophageal reflux (GERD) can lead to wear of the dental tissues. Wear has a mechanical or chemical origin, and it is of extrinsic or intrinsic type.... (Review)
Review
Bruxism and gastroesophageal reflux (GERD) can lead to wear of the dental tissues. Wear has a mechanical or chemical origin, and it is of extrinsic or intrinsic type. Bruxism and GERD are two etiological factors of dental wear. The intrinsic mechanical wear (abfraction) of Bruxism and intrinsic chemical wear (erosion) of GERD are both involved in sleep disorders; indeed, they could have associations and act in synergy in dental wear. The purpose of this review was to find out the possible associations between bruxism and GERD and their effects on tooth wear. The research was conducted on PubMed and the Cochrane Library using the following Keywords/Mesh Terms: Tooth wear, Bruxism, Sleep Bruxism, Sleep Disorders, or GERD. Only systematic reviews and clinical studies performed exclusively on human subjects were included in the review. Initially, the research gave more than 630 results on dental wear, bruxism and GERD and after application of the inclusion criteria irrelevant studies were excluded, and 5 studies were finally included in this review. It was possible to observe the presence of some associations between the two problems (reflux and GERD) and hypothesize negative effects on tooth wear. This research revealed the presence of an interconnection between these three problems (reflux, GERD and tooth wear) that can further act in synergy by attacking the hard dental tissues both from a chemical (reflux) and mechanical (bruxism) point of view. The dentist could play a role of "sentinel" in a multidisciplinary team, intercepting these problems early in order to treat them in the most appropriate way. PROSPERO Registration Number: CRD42021234209.
PubMed: 35207380
DOI: 10.3390/jcm11041107 -
Current Osteoporosis Reports Feb 2022Compare pathophysiology for infectious and noninfectious demineralization disease relative to mineral maintenance, physiologic fluoride levels, and mechanical... (Review)
Review
PURPOSE OF THE REVIEW
Compare pathophysiology for infectious and noninfectious demineralization disease relative to mineral maintenance, physiologic fluoride levels, and mechanical degradation.
RECENT FINDINGS
Environmental acidity, biomechanics, and intercrystalline percolation of endemic fluoride regulate resistance to demineralization relative to osteopenia, noncarious cervical lesions, and dental caries. Demineralization is the most prevalent chronic disease in the world: osteoporosis (OP) >10%, dental caries ~100%. OP is severely debilitating while caries is potentially fatal. Mineralized tissues have a common physiology: cell-mediated apposition, protein matrix, fluid logistics (blood, saliva), intercrystalline ion percolation, cyclic demineralization/remineralization, and acid-based degradation (microbes, clastic cells). Etiology of demineralization involves fluid percolation, metabolism, homeostasis, biomechanics, mechanical wear (attrition or abrasion), and biofilm-related infections. Bone mineral density measurement assesses skeletal mass. Attrition, abrasion, erosion, and abfraction are diagnosed visually, but invisible subsurface caries <400μm cannot be detected. Controlling demineralization at all levels is an important horizon for cost-effective wellness worldwide.
Topics: Dental Caries; Fluorides; Humans; Minerals; Tooth Diseases
PubMed: 35129809
DOI: 10.1007/s11914-022-00722-1 -
Indian Journal of Dental Research :... 2018Denture stomatitis, periodontitis, and peri-implantitis are the growing problems in restorative dentistry. Chemicals play an important role as an adjuvant to mechanical... (Review)
Review
Denture stomatitis, periodontitis, and peri-implantitis are the growing problems in restorative dentistry. Chemicals play an important role as an adjuvant to mechanical cleaning of teeth, implants, surrounding tissues, and prostheses. Current mouth rinses are reported to affect the tissues and prostheses if used on a long-term basis. Sodium bicarbonate, the common baking soda, has been reported to be versatile. A search of the resources through Medline and Google Scholar was made to understand the current status of the mouth rinses and the use of sodium bicarbonate. Different MeSH and search criteria were used for the different search engines. Baking soda, being a common household item, with its ready availability, safety, minimal abrasivity, and bactericidal property makes it a patient-friendly mouthwash, component in the dentifrice, or chewing gum, which can be used on a long-term basis as an adjunct virtually free of any side effects.
Topics: Anti-Bacterial Agents; Chewing Gum; Dental Caries; Dentifrices; Denture Cleansers; Humans; Mouthwashes; Oral Hygiene; Peri-Implantitis; Safety; Sodium Bicarbonate; Stomatitis; Stomatitis, Denture; Tooth Abrasion; Tooth Bleaching Agents
PubMed: 30409952
DOI: 10.4103/ijdr.IJDR_30_17 -
Clinical Oral Investigations Mar 2013The paper's aim is to review dentin hypersensitivity (DHS), discussing pain mechanisms and aetiology. (Review)
Review
OBJECTIVES
The paper's aim is to review dentin hypersensitivity (DHS), discussing pain mechanisms and aetiology.
MATERIALS AND METHODS
Literature was reviewed using search engines with MESH terms, DH pain mechanisms and aetiology (including abrasion, erosion and periodontal disease).
RESULTS
The many hypotheses proposed for DHS attest to our lack of knowledge in understanding neurophysiologic mechanisms, the most widely accepted being the hydrodynamic theory. Dentin tubules must be patent from the oral environment to the pulp. Dentin exposure, usually at the cervical margin, is due to a variety of processes involving gingival recession or loss of enamel, predisposing factors being periodontal disease and treatment, limited alveolar bone, thin biotype, erosion and abrasion.
CONCLUSIONS
The current pain mechanism of DHS is thought to be the hydrodynamic theory. The initiation and progression of DHS are influenced by characteristics of the teeth and periodontium as well as the oral environment and external influences. Risk factors are numerous often acting synergistically and always influenced by individual susceptibility.
CLINICAL RELEVANCE
Whilst the pain mechanism of DHS is not well understood, clinicians need to be mindful of the aetiology and risk factors in order to manage patients' pain and expectations and prevent further dentin exposure with subsequent sensitivity.
Topics: Dentin; Dentin Sensitivity; Disease Susceptibility; Humans; Hydrodynamics; Pain; Periodontal Diseases; Risk Factors; Tooth Cervix; Tooth Wear
PubMed: 23224116
DOI: 10.1007/s00784-012-0887-x -
Biomedicines May 2023This scoping review aims to evaluate methods of conservative reconstruction of dental enamel lesions resulting from abrasions and evaluate the effect of diode laser in... (Review)
Review
UNLABELLED
This scoping review aims to evaluate methods of conservative reconstruction of dental enamel lesions resulting from abrasions and evaluate the effect of diode laser in reducing the symptoms of tooth sensitivity. The cementoenamel junction is more prone to substance loss because the enamel thickness is substantially decreased, resulting in a much weaker enamel-dentin bond.
METHODS
Dental abrasion was examined in the mechanical cause alone. Pubmed, Scopus, and Web of Science were used to discover publications that matched our topic from 1 January 2018 to 20 March 2023. A comparison of various non-carious cervical lesion (NCCL) restoration treatments was generated mostly by mechanical considerations.
RESULTS
A final number of 11 clinical trials and randomized controlled trials were included in the review for qualitative analysis. Composite resins performed well in clinical trials for the restoration of NCCLs.
CONCLUSIONS
Composite, in its different forms of filling and consistency, preceded by the use of adhesives, is an efficient and effective material for the treatment of NCCLs. Diode laser use prior to NCCL restoration of teeth does not diminish restoration retention rate, may lessen hypersensitivity, and may affect restoration success.
PubMed: 37371625
DOI: 10.3390/biomedicines11061530 -
Dental Materials Journal Oct 2022The relative dentin abrasivity-profilometry equivalent values were compared using non-contact profilometry with three subtypes of regular toothpaste and two subtypes of...
The relative dentin abrasivity-profilometry equivalent values were compared using non-contact profilometry with three subtypes of regular toothpaste and two subtypes of whitening toothpaste containing sodium bicarbonate and 35% hydrogen peroxide. Bovine dentin specimens were assigned to six groups: regular toothpaste (R): R1 (BAMBOO SALT GUM OINTMENT); R2 (MEDIAN TARTAR ORIGINAL); R3 (PERIOE Alpha), Reference slurry: RS (calcium pyrophosphate), whitening toothpaste (W): W1 (NET. WT); W2 (Vussen 28 WHITENING). Relative dentin abrasion-profilometry equivalent (RDA-PE) was determined by brushing 10,000 times (n=8). The pH of the toothpaste was measured (n=5) and the abrasive constituents of the toothpaste was analyzed by FE-SEM and EDS. The RDA-PE values ranged from 26 to 166, and the pH level ranges were 4.928-9.153. The RDA-PE value of the whitening toothpaste containing hydrogen peroxide was not high compared with that of the regular toothpaste. The RDA-PE values of whitening toothpaste could vary depending on the mechanism and ingredients of the whitening agents.
Topics: Animals; Bleaching Agents; Calcium Pyrophosphate; Cattle; Dentin; Hydrogen; Materials Testing; Ointments; Sodium Bicarbonate; Tooth Abrasion; Toothbrushing; Toothpastes
PubMed: 35793939
DOI: 10.4012/dmj.2021-303 -
Clinical Oral Investigations Apr 2013This study aimed to determine the brushing forces applied during in vivo toothbrushing with manual and sonic toothbrushes and to analyse the effect of these brushing...
OBJECTIVES
This study aimed to determine the brushing forces applied during in vivo toothbrushing with manual and sonic toothbrushes and to analyse the effect of these brushing forces on abrasion of sound and eroded enamel and dentin in vitro.
MATERIALS AND METHODS
Brushing forces of a manual and two sonic toothbrushes (low and high frequency mode) were measured in 27 adults before and after instruction of the respective brushing technique and statistically analysed by repeated measures analysis of variance (ANOVA). In the in vitro experiment, sound and eroded enamel and dentin specimens (each subgroup n = 12) were brushed in an automatic brushing machine with the respective brushing forces using a fluoridated toothpaste slurry. Abrasion was determined by profilometry and statistically analysed by one-way ANOVA.
RESULTS
Average brushing force of the manual toothbrush (1.6 ± 0.3 N) was significantly higher than for the sonic toothbrushes (0.9 ± 0.2 N), which were not significantly different from each other. Brushing force prior and after instruction of the brushing technique was not significantly different. The manual toothbrush caused highest abrasion of sound and eroded dentin, but lowest on sound enamel. No significant differences were detected on eroded enamel.
CONCLUSION
Brushing forces of manual and sonic toothbrushes are different and affect their abrasive capacity.
CLINICAL SIGNIFICANCE
Patients with severe tooth wear and exposed and/or eroded dentin surfaces should use sonic toothbrushes to reduce abrasion, while patients without tooth wear or with erosive lesions confining only to enamel do not benefit from sonic toothbrushes with regard to abrasion.
Topics: Adolescent; Adult; Analysis of Variance; Dental Enamel; Dental Stress Analysis; Dentin; Female; Humans; Male; Middle Aged; Statistics, Nonparametric; Tooth Abrasion; Tooth Erosion; Toothbrushing; Ultrasonics; Young Adult
PubMed: 22791283
DOI: 10.1007/s00784-012-0788-z