-
International Journal of Oral Science Mar 2018Malocclusion is a worldwide dental problem that influences the affected individuals to varying degrees. Many factors contribute to the anomaly in dentition, including... (Review)
Review
Malocclusion is a worldwide dental problem that influences the affected individuals to varying degrees. Many factors contribute to the anomaly in dentition, including hereditary and environmental aspects. Dental caries, pulpal and periapical lesions, dental trauma, abnormality of development, and oral habits are most common dental diseases in children that strongly relate to malocclusion. Management of oral health in the early childhood stage is carried out in clinic work of pediatric dentistry to minimize the unwanted effect of these diseases on dentition. This article highlights these diseases and their impacts on malocclusion in sequence. Prevention, treatment, and management of these conditions are also illustrated in order to achieve successful oral health for children and adolescents, even for their adult stage.
Topics: Child; Humans; Malocclusion; Prevalence; Stomatognathic Diseases
PubMed: 29540669
DOI: 10.1038/s41368-018-0012-3 -
Dental Press Journal of Orthodontics 2018Considering that the available studies on prevalence of malocclusions are local or national-based, this study aimed to pool data to determine the distribution of...
OBJECTIVE
Considering that the available studies on prevalence of malocclusions are local or national-based, this study aimed to pool data to determine the distribution of malocclusion traits worldwide in mixed and permanent dentitions.
METHODS
An electronic search was conducted using PubMed, Embase and Google Scholar search engines, to retrieve data on malocclusion prevalence for both mixed and permanent dentitions, up to December 2016.
RESULTS
Out of 2,977 retrieved studies, 53 were included. In permanent dentition, the global distributions of Class I, Class II, and Class III malocclusion were 74.7% [31 - 97%], 19.56% [2 - 63%] and 5.93% [1 - 20%], respectively. In mixed dentition, the distributions of these malocclusions were 73% [40 - 96%], 23% [2 - 58%] and 4% [0.7 - 13%]. Regarding vertical malocclusions, the observed deep overbite and open bite were 21.98% and 4.93%, respectively. Posterior crossbite affected 9.39% of the sample. Africans showed the highest prevalence of Class I and open bite in permanent dentition (89% and 8%, respectively), and in mixed dentition (93% and 10%, respectively), while Caucasians showed the highest prevalence of Class II in permanent dentition (23%) and mixed dentition (26%). Class III malocclusion in mixed dentition was highly prevalent among Mongoloids.
CONCLUSION
Worldwide, in mixed and permanent dentitions, Angle Class I malocclusion is more prevalent than Class II, specifically among Africans; the least prevalent was Class III, although higher among Mongoloids in mixed dentition. In vertical dimension, open bite was highest among Mongoloids in mixed dentition. Posterior crossbite was more prevalent in permanent dentition in Europe.
Topics: Databases, Factual; Dental Occlusion, Traumatic; Dentition, Mixed; Dentition, Permanent; Female; Geography; Global Health; Humans; Male; Malocclusion; Malocclusion, Angle Class I; Malocclusion, Angle Class II; Malocclusion, Angle Class III; Open Bite; Population; Prevalence; Race Factors
PubMed: 30672991
DOI: 10.1590/2177-6709.23.6.40.e1-10.onl -
International Journal of Environmental... Jun 2022The purpose of this study was to systematically review the literature regarding the prevalence of malocclusion and different orthodontic features in children and... (Review)
Review
UNLABELLED
The purpose of this study was to systematically review the literature regarding the prevalence of malocclusion and different orthodontic features in children and adolescents.
METHODS
The digital databases PubMed, Cochrane, Embase, Open Grey, and Web of Science were searched from inception to November 2021. Epidemiological studies, randomized controlled trials, clinical trials, and comparative studies involving subjects ≤ 18 years old and focusing on the prevalence of malocclusion and different orthodontic features were selected. Articles written in English, Dutch, French, German, Spanish, and Portuguese were included. Three authors independently assessed the eligibility, extracted the data from, and ascertained the quality of the studies. Since all of the included articles were non-randomized, the MINORS tool was used to score the risk of bias.
RESULTS
The initial electronic database search identified a total of 6775 articles. After the removal of duplicates, 4646 articles were screened using the title and abstract. A total of 415 full-text articles were assessed, and 123 articles were finally included for qualitative analysis. The range of prevalence of Angle Class I, Class II, and Class III malocclusion was very large, with a mean prevalence of 51.9% (SD 20.7), 23.8% (SD 14.6), and 6.5% (SD 6.5), respectively. As for the prevalence of overjet, reversed overjet, overbite, and open bite, no means were calculated due to the large variation in the definitions, measurements, methodologies, and cut-off points among the studies. The prevalence of anterior crossbite, posterior crossbite, and crossbite with functional shift were 7.8% (SD 6.5), 9.0% (SD 7.34), and 12.2% (SD 7.8), respectively. The prevalence of hypodontia and hyperdontia were reported to be 6.8% (SD 4.2) and 1.8% (SD 1.3), respectively. For impacted teeth, ectopic eruption, and transposition, means of 4.9% (SD 3.7), 5.4% (SD 3.8), and 0.5% (SD 0.5) were found, respectively.
CONCLUSIONS
There is an urgent need to clearly define orthodontic features and malocclusion traits as well as to reach consensus on the protocols used to quantify them. The large variety in methodological approaches found in the literature makes the data regarding prevalence of malocclusion unreliable.
Topics: Adolescent; Child; Humans; Malocclusion; Malocclusion, Angle Class II; Orthodontics, Corrective; Overbite; Prevalence
PubMed: 35742703
DOI: 10.3390/ijerph19127446 -
Acta Otorhinolaryngologica Italica :... Oct 2016The ratio of bad habits, mouth breathing and malocclusion is an important issue in view of prevention and early treatment of disorders of the craniofacial growth. While...
The ratio of bad habits, mouth breathing and malocclusion is an important issue in view of prevention and early treatment of disorders of the craniofacial growth. While bad habits can interfere with the position of the teeth and normal pattern of skeletal growth, on the other hand obstruction of the upper airway, resulting in mouth breathing, changes the pattern of craniofacial growth causing malocclusion. Our crosssectional study, carried out on 3017 children using the ROMA index, was developed to verify if there was a significant correlation between bad habits/mouth breathing and malocclusion. The results showed that an increase in the degree of the index increases the prevalence of bad habits and mouth breathing, meaning that these factors are associated with more severe malocclusions. Moreover, we found a significant association of bad habits with increased overjet and openbite, while no association was found with crossbite. Additionally, we found that mouth breathing is closely related to increased overjet, reduced overjet, anterior or posterior crossbite, openbite and displacement of contact points. Therefore, it is necessary to intervene early on these aetiological factors of malocclusion to prevent its development or worsening and, if already developed, correct it by early orthodontic treatment to promote eugnatic skeletal growth.
Topics: Adolescent; Child; Cross-Sectional Studies; Female; Habits; Humans; Male; Malocclusion; Mouth Breathing
PubMed: 27958599
DOI: 10.14639/0392-100X-770 -
Australian Dental Journal Mar 2017Maintaining teeth in their corrected positions following orthodontic treatment can be extremely challenging. Teeth have a tendency to move back towards the original... (Review)
Review
Maintaining teeth in their corrected positions following orthodontic treatment can be extremely challenging. Teeth have a tendency to move back towards the original malocclusion as a result of periodontal, gingival, occlusal and growth related factors. However, tooth movement can also occur as a result of normal age changes. Because orthodontics is unable to predict which patients are at risk of relapse, those which will remain stable and the extent of relapse that will occur in the long-term, clinicians need to treat all patients as if they have a high potential to relapse. To reduce this risk, long term retention is advocated. This can be a significant commitment for patients, and so retention and the potential for relapse must form a key part of the informed consent process prior to orthodontic treatment. It is vital that patients are made fully aware of their responsibilities in committing to wear retainers as prescribed in order to reduce the chance of relapse. If patients are unable or unwilling to comply as prescribed, they must be prepared to accept that there will be tooth positional changes following treatment. There is currently insufficient high quality evidence regarding the best type of retention or retention regimen, and so each clinician's approach will be affected by their personal, clinical experience and expertise, and guided by their patients' expectations and circumstances.
Topics: Humans; Malocclusion; Orthodontic Retainers; Orthodontics, Corrective; Recurrence
PubMed: 28297088
DOI: 10.1111/adj.12475 -
American Journal of Orthodontics and... Apr 2016A man, aged 28 years 9 months, came for an orthodontic consultation for a skeletal Class III malocclusion (ANB angle, -3°) with a modest asymmetric Class II and...
A man, aged 28 years 9 months, came for an orthodontic consultation for a skeletal Class III malocclusion (ANB angle, -3°) with a modest asymmetric Class II and Class III molar relationship, complicated by an anterior crossbite, a deepbite, and 12 mm of asymmetric maxillary crowding. Despite the severity of the malocclusion (Discrepancy Index, 37), the patient desired noninvasive camouflage treatment. The 3-Ring diagnosis showed that treatment without extractions or orthognathic surgery was a viable approach. Arch length analysis indicated that differential interproximal enamel reduction could resolve the crowding and midline discrepancy, but a miniscrew in the infrazygomatic crest was needed to retract the right buccal segment. The patient accepted the complex, staged treatment plan with the understanding that it would require about 3.5 years. Fixed appliance treatment with passive self-ligating brackets, early light short elastics, bite turbos, interproximal enamel reduction, and infrazygomatic crest retraction opened the vertical dimension of the occlusion, improved the ANB angle by 2°, and achieved excellent alignment, as evidenced by a Cast Radiograph Evaluation score of 28 and a Pink and White dental esthetic score of 3.
Topics: Adult; Cephalometry; Enamel Microabrasion; Esthetics, Dental; Humans; Male; Malocclusion, Angle Class II; Malocclusion, Angle Class III; Orthodontic Anchorage Procedures; Orthodontic Appliance Design; Orthodontic Appliances; Orthodontic Retainers; Overbite; Patient Care Planning; Tooth Movement Techniques; Treatment Outcome; Vertical Dimension
PubMed: 27021460
DOI: 10.1016/j.ajodo.2015.04.042 -
The Angle Orthodontist 1994Asymmetry in the face and dentition is a naturally occurring phenomenon. In most cases facial asymmetry can only be detected by comparing homologous parts of the face.... (Review)
Review
Asymmetry in the face and dentition is a naturally occurring phenomenon. In most cases facial asymmetry can only be detected by comparing homologous parts of the face. The etiology of asymmetry includes: a) Genetic or congenital malformations e.g. hemifacial microsomia and unilateral clefts of the lip and palate; b) Environmental factors, e.g. habits and trauma; c) Functional deviations, e.g. mandibular shifts as a result of tooth interferences. Dental asymmetries and a variety of functional deviations can be treated orthodontically. On the other hand, significant structural facial asymmetries are not easily amenable to orthodontic treatment. These problems may require orthopedic correction during the growth period and/or surgical management at a later point. Patient complaints and desires need to be addressed since they may vary from unrealistic expectations to a lack of concern even in the presence of large deviations. With mild dental, skeletal and soft tissue deviations the advisability of treatment should be carefully considered.
Topics: Facial Asymmetry; Humans; Malocclusion
PubMed: 8010527
DOI: 10.1043/0003-3219(1994)064<0089:DAFAAR>2.0.CO;2 -
Dental Press Journal of Orthodontics Aug 2019Tooth crowding and protrusions demand rigorous attention during orthodontic planning that includes the extraction of first and second premolars. Some characteristics,...
Tooth crowding and protrusions demand rigorous attention during orthodontic planning that includes the extraction of first and second premolars. Some characteristics, such as dentoalveolar bone discrepancies, maxillomandibular relations, facial profile, skeletal maturation, dental asymmetries and patient cooperation, are important elements of an orthodontic diagnosis. This study discusses the options of treatments with extractions and describes the correction of a Class I malocclusion, bimaxillary protrusion, severe anterior crowding in both dental arches and tooth-size discrepancy, using first premolar extractions.
Topics: Bicuspid; Cephalometry; Humans; Malocclusion, Angle Class I; Orthodontics; Orthodontics, Corrective; Tooth Extraction
PubMed: 31390455
DOI: 10.1590/2177-6709.24.3.088-098.bbo -
The Angle Orthodontist Jul 2021To evaluate tooth movements during maxillary arch expansion with clear aligner treatment.
OBJECTIVES
To evaluate tooth movements during maxillary arch expansion with clear aligner treatment.
MATERIALS AND METHODS
The study group included 28 subjects (16 females, 12 males, mean age 31.9 ± 5.4 years) collected prospectively from January 2018 to May 2019. Inclusion criteria were European ancestry, posterior transverse discrepancy of 3-6 mm, permanent dentition stage, presence of second permanent molars, mild or moderate crowding, and good compliance with aligners. Treatment protocol included nonextraction strategies, application of Invisalign clear aligner system, and no auxiliaries other than Invisalign attachments. Linear and angular measurements were performed before treatment (T1), at the end of treatment (T2), and on final virtual models (T2 ClinCheck). A paired t-test was used to compare T2-T1 and T2-T2 ClinCheck changes. The level of significance was set at 5%.
RESULTS
Statistically significant differences were found for all measurements, except for ones at the upper second molars. The greatest increase in maxillary width was detected at the upper first and second premolars: +3.5 mm for the first premolar and +3.8 mm for the second premolar at T2. Comparison of T2-T1 angular outcomes showed statistically significant changes in the inclinations of all teeth except for the second permanent molars. T2-T2 ClinCheck showed significant differences for both linear and angular measurements for maxillary canines, resulting in poor predictability.
CONCLUSIONS
Maxillary arch development revealed a progressive reduction of the expansion rate and buccal tipping in the anterior, lateral, and posterior regions, with the greatest net increase at the first and second premolars. Clinical attention should be paid to maxillary canine movements, and overcorrection should be planned for them during dentoalveolar expansion.
Topics: Adult; Dental Arch; Female; Humans; Male; Malocclusion; Maxilla; Orthodontic Appliances, Removable; Palatal Expansion Technique; Tooth Movement Techniques
PubMed: 33570617
DOI: 10.2319/080520-687.1 -
Stomatologija 2014Interproximal enamel reduction is a part of orthodontic treatment for gaining a modest amount of space in the treatment of crowding. Today interproximal enamel reduction... (Review)
Review
OBJECTIVE
Interproximal enamel reduction is a part of orthodontic treatment for gaining a modest amount of space in the treatment of crowding. Today interproximal enamel reduction has become a viable alternative to the extraction of permanent teeth, and helps to adjust the Bolton Index discrepancy. The aim of the study is to evaluate various interproximal enamel reduction techniques, its indications, contraindications and complications presented in recent scientific studies.
MATERIAL AND METHODS
Papers published in English language between 2003 and 2012 were searched in PubMed, ScienceDirect and The Cochrane Library databases, as well as the Web search Google Scholar. Initial searches were made to find peer-reviewed systematic reviews, meta-analyses, literature reviews, clinical trials, which analysed at least one interproximal enamel reduction method. 31 published data fulfilled the inclusion criteria.
RESULTS
According to the study, abrasive metal strips, diamond-coated stripping disks, and air-rotor stripping are the main interproximal enamel reduction techniques. Indications for use are mild or moderate crowding in dental arches, Bolton Index discrepancy, changes in tooth shape and dental esthetics within the enamel, enhancement of retention and stability after orthodontic treatment, normalization of gingival contour, elimination of black gingival triangles, and correction of the Curve of Spee. Complications of interproximal enamel reduction are hypersensitivity, irreversible damage of dental pulp, increased formation of plaque, the risk of caries in the stripped enamel areas and periodontal diseases.
CONCLUSION
Interproximal enamel reduction is an important part of orthodontic treatment for gaining space in the dental arch, and for the correction of the Bolton index discrepancy.
Topics: Dental Enamel; Enamel Microabrasion; Humans; Malocclusion; Orthodontics, Corrective
PubMed: 24824056
DOI: No ID Found